In our latitudes, it is important when building a country house to prevent heat loss through walls, floors, ceilings. For this, work is carried out on thermal insulation. At the same time, the craftsmen use modern materials that provide maximum microclimatic comfort for the permanent residence of a family. It is advisable to purchase insulation immediately in sufficient quantity in the company "Volbek", having previously selected from a wide range of goods presented on the virtual showcase.
Why and when insulation is required
Modern homes are built from a wide variety of materials using a variety of technologies. Used as wall:
- building, finishing bricks;
- gas silicate blocks;
- sawn, profiled, glued beams;
- rounded log;
- monolithic structures;
- reinforced concrete slabs;
- wood concrete, sand concrete, etc.
Separately, it is necessary to mention the cottages built using frame technology, which is very different from the more traditional, "classic".
In some cases, home insulation is neglected. It is believed, for example, that wooden houses do not need this, since wood has a low thermal conductivity. Brick and concrete walls of sufficient thickness are often left without insulation.
But there is still heat loss through such walls, and they can be significantly reduced, thereby reducing heating costs. It is important to insulate floors, foundations, roofs, especially if the house is attic. At the same time, the thickness of the walls can be reduced, which will lead to a decrease in the total cost of construction.
As for the frame technology, here it is generally impossible to do without the use of heat-insulating materials.
Features of the choice of insulation, installation
The construction market offers several types of thermal insulation materials. Most often, the most popular, widely demanded ones are used:
- Styrofoam;
- extruded polystyrene foam;
- mineral, basalt, stone wool;
- glass wool;
- foil heat insulators.
If buy wholesale insulation, then you can save a lot. The main thing is to fully meet the needs of the construction site.
Styrofoam and polystyrene are supplied only in the form of plates, but mineral wool of different types can be presented both in rolls and plates of different stiffness. Installation can be carried out on horizontal, vertical and inclined surfaces using wooden rails that form a kind of "compartments".
The distance between two adjacent posts depends on the type of insulation. For mineral wool (rolled, slab), it should be slightly less than the width, so that the insulation "enters" by surprise. For reliability, the heat insulator is fixed with strips. Styrofoam sheets are installed with a gap for use with polyurethane foam.
Experts say that the insulation needs to be mounted on the outer part of the facade. This will make it work more efficiently. From above, it is closed with siding, blockhouse, imitation timber, clinker plates or decorative bricks.
Based on site materials https://www.volbek.ru/
