Rating of the best pumps for wells in 2020: price review, reviews

click fraud protection

It is impossible to operate a well without a pump: the water itself will not rise, and it is impossible to scoop it up with a bucket. There is no need to describe the advantages of a well over a well. In addition to reducing labor costs and automating the process, the deeper water is taken from, the less reason to worry about its quality. A well with a properly selected pump will provide a house and a plot of any size with tasty and clean water. It is the pump that ensures the rise of water from the bowels of the earth to the surface. However, choosing a pump for a well is not the easiest event. To create a convenient autonomous water supply system, it is necessary to take into account many factors: water depth, equipment performance, etc. Let's take a closer look at how to choose a good pump for a well, and which 6 well pumps can rightfully be called the best.

CONTENT

  • 1 How to choose the best pump for a well
  • 2 Top 6 well pumps
  • 3 Comparison table of the best pumps for wells
  • 4 Frequently asked Questions

How to choose the best pump for a well

A well pump will be required anywhere where a well is drilled in the project. And these are private houses, and summer cottages, and cottage settlements, and suburban areas. So, what to look for when choosing a pump.

Design

There are several types of pumps, differing in design:

  1. Surface: The pump is placed on the ground and sucks in water. Such equipment is recommended for wells in which the distance to water does not exceed 8 meters.
  2. Submersible: The unit is submerged in water. This pump is suitable for the deepest wells. The system works on the principle of pushing water out.
  3. Deep: compact and very powerful pumps that can pump water from very great depths. By design, submersible pumps are divided into centrifugal and vibration. Vibrating ones are cheaper than centrifugal ones, but they have less productivity and, during long-term operation, destroy the walls of the well.

In addition, the pumps are produced in three casing diameters corresponding to three standard sizes of wells. Accordingly, immediately when designing a well, it is necessary to see which pump will be best operated with it. For example, a lot more pumping equipment is sold for four-inch wells than for three-inch wells).

Performance

The pump capacity (or debit according to the passport) must correspond to the rate of filling the well with water, otherwise the pump will start to run dry, which will lead to its breakdown. Just for these purposes, you can purchase a cheap vortex pump. It is easy to calculate the filling speed:

  • measure the depth of the source using a string with a weight attached to it (you need to lower it to the bottom and measure the dry and wet part);
  • to detect the time during which the water is completely pumped out;
  • to detect the time during which the well is fully filled (check with the same meter);
  • divide time 2 by time 1 - this will be the debit.

Power

The faster the water column is replenished, the more powerful the pump can be used. To calculate the required pump power, you should take the water rate per person (on average) 1 cubic meter and multiply by the number of people living in the house.

Top 6 well pumps

Let's take a look at some pump models in different categories that are leaders in consumer preference.

The best vibrating pumps for wells

Unipump Aquarebot M 24-25 V

Pump Unipump М 24 25: photo

The domestic pump station Unipump Aquarebot M 24-25 V is among the sales leaders at a low price of 5,400 rubles. It is a great pump to meet the needs of gardeners and country house owners. The maximum power of the unit is 245 W, and the productivity is 1020 cubic meters per hour. Water intake depth - 40m, immersion depth - 3m.

Price: ₽ 6 740

Brook-1

Pump rucheek 1: photo

The second unit worthy of review is the Trickle-1 pump at a price of only 1,500 rubles. The trickle is suitable for pumping water from a well, and from a well, and from a reservoir. With a head of 40 m, the pump pumps out 432 liters per hour. The maximum immersion depth can reach 60 m. Due to the upper water intake, pebbles and sand from the bottom are excluded.

Price: ₽ 1 475

The best vortex pumps for wells

BELAMOS TM10-60

Best well pumps: Independent Top 6

The BELAMOS TM10-60 pump unit is inexpensive - only about 7,000 rubles and is easy to install. It is most often used to supply water from wells, reservoirs, boreholes, irrigation reservoirs and the device of the water supply system of a house or summer cottage. The unit capacity is up to 2400 l / h.

Price: ₽ 7 297

Vortex CH-100B

Vihr sn 100b pump: photo

The second pump in this category is the 1100W Vortex SN-100B submersible unit. This model is suitable for both irrigation and private water supply. The immersion depth of the equipment is 35m, and the permissible head is 120m.

Price: ₽ 6 480

The best centrifugal pumps for wells

HAMMER NAP600 / 39S

Pump HAMMER NAP600 39S: photo

HAMMER NAP600 / 39S is a borehole pump for very deep wells with an intake depth of up to 45 m and a lifting height of 39 m. The pump pumps up to 3200 liters in one hour. Since the water holes are located in the middle of the case, you can be sure that no sand from the bottom will get into the water. The pump has a filter and thermal protection. The cost of such high-quality equipment is only 8,300 rubles.

Price: ₽ 8 299

JILEX VODOMET PROF 110/110

Pump dzhileks vodomet prof 110: photo

The second representative of the line is JILEX VODOMET PROF 110/110. This unit will be able to raise water to a height of 110m. The immersion depth of the pump is 30m. Water consumption - 6600 l / h. Such a unique borehole pump with a high head costs 20,000 rubles.

Price: ₽ 20 200

Comparison table of the best pumps for wells

NameMain characteristicsPrice
Unipump Aquarebot M 24-25 VPump Unipump М 24 25: photoThe maximum power of the unit is 245 W, and the productivity is 1020 cubic meters per hour, the water intake depth is 40 m, the immersion depth is 3 m.₽ 5 390
Buy
Brook-1Pump rucheek 1: photoSuitable for pumping water from a well, and from a well, and from a reservoir, the maximum immersion depth can reach 60 m.₽ 1 475Buy
BELAMOS TM10-60Best well pumps: Independent Top 6It is used to supply water from wells, reservoirs, wells, reservoirs for irrigation and the device of a water supply system for a house or summer cottage, capacity up to 2400 l / h.₽ 7 297Buy
Vortex CH-100BBest well pumps: Independent Top 6Power 1100 W, suitable for both irrigation and private water supply, the immersion depth of the equipment is 35 m.₽ 6 480Buy
HAMMER NAP600 / 39SPump HAMMER NAP600 39S: photoThe intake depth is up to 45 m and with the liquid lifting height - 39 m, pumps up to 3200 liters in one hour.₽ 8 299
Buy
JILEX VODOMET PROF 110/110
Pump dzhileks vodomet prof 110: photo
It can raise water to a height of 110m, the immersion depth of the pump is 30m, and the water consumption is 6600 l / h.₽ 20 200
Buy

Frequently asked Questions

Can a borehole pump pump water from a well?
Undoubtedly. The possibility of pumping water from the well is specified in the instructions for use. The only condition for long-term operation of the equipment: it must be completely submerged in water.

What pipes are needed for a borehole pump?
The best pipe options are products made of polyvinylchloride, polypropylene or plastic. They are easy to install, durable and do not emit harmful substances into the water. A watering hose can be attached to a not very powerful pump used for irrigation.

Read also:

Best fecal pumps

ShareTweetEmailPin