- 1 Types of rear view cameras for cars
- 2 Leading manufacturers of car cameras
- 3 The best budget types of car rear vision cameras
- 4 Best premium car cameras
- 5 Best Rear View Cameras by Nominations
- 6 What to look for when choosing a rear view camera for a car
- 7 Installing the rear view camera: installation step by step
Types of rear view cameras for cars
Before you buy a fancy rear-view camera, consider options that differ in design. There are only a few types of such, but they certainly deserve attention.
- Standard car rear view camera. Such equipment is installed in the place of the standard license plate illumination or in a specially designated niche, if such is provided by the automaker.
- Mortise rear view camera. Attaches directly to the bumper or to the rear of the car. Pre-requires the organization of the place and is fastened with screws or a special latch.
- Miniature Rear View Camera - Mounts to the top of the case above the license plate. Suitable for almost any vehicle, provided that the latter does not have a curved bumper, otherwise it will not be possible to provide full rearview visibility.
- The universal rear view camera comes with a special stand with holes for screws or self-tapping screws. There are options for fastening with double-sided tape, but this is not a very reliable method, since in winter the device can lag behind the surface.
Each of the models of car cameras is easy to install and successfully transmits a signal to the monitor, the main thing is to make the correct installation of the associated structure, but more on that in our next sections.
The experts of our editorial office admit that it is better to use models that are invisible to the human eye. At the same time, a method of displaying information on the screen was definitely provided.
Leading manufacturers of car cameras
Planning to install an inexpensive overview camera on your car? Then you can focus on buying accessories of Russian quality. But you should be careful, because the quality of some models may be insufficient, respectively, and the warranty period for such devices is minimal. If you want to get an expensive and reliable rear-view camera, you can no doubt choose any option from the list of the following brands.
- Rolsen Is a reliable Russian technique, in the production of which only unique technologies are used. They are overwhelmingly involved in Toshiba and LG products.
- Sho-Me - a brand with a long history, specializing in high-quality performance in the manufacture of lighting and radio equipment for cars.
- Bigson Is a South Korean company producing video equipment and other types of electronics for premium cars and budget vehicles.
- Fighter - manufactures equipment for cars and trucks, has a 12-month warranty for any product.
- Alpine Electronics Is a Japanese manufacturer in the automotive market, specializing in the manufacture of video cameras for branded cars such as Volkswagen, BMV, Audi.
But in addition to such data, you, of course, should also know some technical features, and most importantly, choose a model that is rated in a specific category. Then you can guarantee that the equipment will serve for a long period.
The best budget types of car rear vision cameras
In the case when the preferences for choice are minimal, models of the budget performance class are suitable. Our editorial team has prepared an overview of four interesting options for rear-view cameras at affordable prices.
XPX CCD-318 - Universal Parking Camera
Convenient device for use on passenger cars. It is distinguished by a simple design and the presence of LED backlighting, respectively, in the dark, the visibility will not be distorted.
|Matrix size, mm||Number of TV lines, TV||Viewing angle, °||Power, W||Parking lines|
|4.03×3.12||480||170||1||there is|Rear view camera XPX CCD-318
Backlit car rear view camera
An excellent model for its value. Suitable for any method of attachment to the car body. It has a stand and a photosensitive matrix, as well as a wide viewing angle, which makes parking even easier.
|Type of shell||The matrix||Viewing angle||Permission||Video output|
|Metallic, waterproof||XPX CCD-318||170||648×488||RCA|
AvtoGSM Parking C04 - rear view camera with sealed housing
The quality of the case is felt as soon as you pick up the device. The plastic is made hermetically sealed without deep cracks and playing parts of the case. The device has built-in parking guidelines.
|Resolution, TVL||Working temperature, ° С||Viewing angle, °||Color system||Voltage, V|
|420||111||NTSC||9-16|Rear view camera AvtoGSM Parking C04
SPARK-M2 - monofunctional rear view camera
The device is equipped with a built-in backlight, suitable for most Mazda vehicle models. It has a special mount, with which the camera can be mounted instead of one license plate light.
|Matrix pixels||Matrix resolution, TV lines||Viewing angle, °||Voltage for power supply, V||Parking lines|
|PAL / NTSC 976 × 572||560||170||6-15||Yes (switchable)|Rear view camera sPARK-M2
GOOD TO KNOW!
In order to choose the right model from the listed ones, it is necessary to carefully study the technical characteristics, and most importantly, to take into account all sorts of features of the operation of car cameras.
Best premium car cameras
Want a more expensive model of car parking camera? Then it is important to know what characteristics will correspond to its price. In this mini-review, we will look at three models that have been analyzed by experts for all the main characteristics.
Avis CCD (AVS311CPR 990) - a versatile camera with a good matrix
Interesting in appearance model with a durable metal frame. The device can be used not only for a rear view of the space, but also as a side viewer, as it is equipped with a unique "eye" design of the optics.
|Connection type||The matrix||The presence of moisture protection||Resolution, lines||Viewing angle, °|
|Wired||Ccd||there is||420||170|Avis CCD Rear View Camera (AVS311CPR 990)
Phantom CA-2307N - Universal Mount Model
The device is designed for any passenger car. Fits into the car body in a specially prepared hole. The device has a complete set and a set of impressive characteristics.
|Number of TV lines||Matrix size, “||Viewing angle, °||NTSC support||Waterproof class|
|580||¼||170||Yes||IP68|Rear view camera Phantom CA-2307N
MYDEAN VCM-416C - Universal Front / Rear Camera
One of the main characteristics of the proposed model is the high quality of the image transmitted to the monitor. It sees obstacles when parking even in the dark, in addition, it is equipped with a wide turning angle.
|Color system||Viewing angle, °||Automatic start||Matrix type||Resolution, TV-lines|
|NTSC||170||When reversing||CMOS||420|Rear View Camera MYDEAN VCM-416C
The main advantage of universal rear-view cameras is their ability to attach to any part of the body, in some situations it is successfully mounted to the bumper and is securely held while driving.
Best Rear View Cameras by Nominations
No wonder our editors have highlighted a separate list of the best nominations for car parking cameras, at this stage consider options that differ from each other in design, and also go into the details of technical characteristics.
Compact mortise models for cars
Such options are used when there is no room for surface installation. Mortise cameras are small in size, so they can be hung in the upper part of the license plate frame or in the bumper holes.
KsizeCAM-6L - snap-on design
A very convenient option when the car has a special hole for installation. Parking lines are provided, so it is advisable to install in the middle of the body. According to users, this model is the best in the stated category.
|Viewing angle, °||Color system||Working temperature, ° С||Protection type||Matrix type|
|170||NTSC||-20 +70||Dust and waterproof||CMOS7070|Rear view camera KsizeCAM-6L
REDPOWER - universal flush-mount camera
The device provides a high quality matrix, which creates maximum coverage of illumination, due to which the view is improved at any time of the day. The image comes to the receiver in a contrasting color, so the slightest obstacle will be immediately noticed.
|Color system||Pixels||Viewing angle, °||Working voltage||Working temperature, ° С|
|PAl / NTSC||720×576||120||12V DC||-25 – +65|Universal camera REDPOWER
Mortise devices can be used not only for cars, but also for vans and trucks. The main rule of operating equipment is correct installation.
Overhead cameras for cars
Overhead type auto cameras have a high color rendering, moreover, they are distinguished by high-quality images in the dark. Such structures are fastened reliably, they do not loosen even when the car is moving at high speed. Reversing movement is perfectly controlled by means of parking guidelines.
SWAT VDC-007C - chrome surface-mounted model
Reliable and durable model that does not degrade image quality over several years of use. A clear image of the zone where you want to install the car is transmitted to the screen, in addition, with the help of special markings in such a device, the dimensions of the vehicle are registered directly on the monitor.
|Sensor||Resolution, TV lines||Internal system||Number of pixels||Working temperature|
|1/3 "color CMOS||480||PAL / NTSC||648×488||-20 – +70|Universal camera SWAT VDC-007C
Car camera SWAT VDC-054
Such a device is ideally suitable for vehicles of a foreign manufacturer. Perfect camera compatibility with all Lexus, Mazda, Toyota cars. The design has a convenient and reliable lock.
|Sensor type||Permission||Number of pixels||Color system||Matrix size|
|1/3 "color CMOS PC7070||480 TV lines||648×488||NTSC||3.63 × 2.73 mm|Car camera SWAT VDC-054
Overhead cameras are devices characterized by an elementary installation. It is very convenient if there is a specially designated area for installation. However, its preparation for installation is not difficult. You can attach the equipment to any convenient place in the rear of the body.
Best cameras in license plate frame
If your car is equipped with a camera installation in a license plate, there will be a niche for the equipment on the frame. If you have purchased a classic vehicle model, you will have to choose the camera yourself.
BLACKVIEW UC-77 BLACK LED - model with sealed housing
Equipment that successfully broadcasts the image from the back of the car. The graphics do not "slow down", have clear boundaries, so that the driver will not make mistakes when making a maneuver. And the colored parking lines allow you to accurately position the rear of the car in the selected location.
|Backlight presence||Resolution, Pc||Color system||Viewing angle, °||Degree of moisture protection|
|there is||648×488||NTSC||170||IP67|Car camera BLACKVIEW UC-77 BLACK LED
Avis AVS345CPR - IR model
This version of the device is suitable for absolutely any car model, provided that the dimensions of the niche under the license plate have standard dimensions. The device copes well with its tasks, and its installation does not take much time.
|Working temperature, ° С||Video system||Viewing angle, °||Dimensions, cm||Availability of automated options|
|-30 – +65||NTSC||170||55,5×17×4||Yes|Car camera Avis AVS345CPR
What to look for when choosing a rear view camera for a car
First of all, in the matter of choice, it is worth focusing on the needs, namely, on what result you want to get from the shooting, and, of course, on the editing option.
- If the car does not provide a seat for a rear-view camera, then immediately abandon the mortise structures. Otherwise, you will have to drill holes in the bumper or other part of the body.
- If you regularly travel at night, then a car camera with a high resolution and LED backlight is suitable for you.
- Worried about getting your camera wet during the rain? Then get the option with the maximum level of moisture resistance.
- The operating temperature limit for the reversing camera should be between +20 and -100 degrees. This will allow the camera to remain operational in the event of sudden temperature changes.
- For optimal visibility at night and during the day, it is best to choose a camera that displays colored parking lines as well as a good swing angle. The minimum indicator for this should be 115 °.
GOOD TO KNOW!
Along with this, consider in what conditions you plan to use a rear view camera for a car. For example, if your car spends the night on the street at any time of the year, then it is advisable to give preference to an expensive model with several levels of protection.
Installing the rear view camera: installation step by step
If there is no money to mount the camera in a car service, you can try to implement the installation yourself. To do this, you need to act step by step, and most importantly, prepare the tools.
What you need to work
The list of inventory may vary depending on how the fastening will be carried out. For example, when fixing a mortise chamber, you will need a perforator and self-tapping screws, and if this is an overhead model, then the kit may include double-sided tape or special fastening screws. The more difficult the installation, the larger the inventory list.
Preparing the site for installation and connection
You need to choose a place so that the camera is invisible to the human eye. Unfortunately, there are quite a few pests that can steal your device. The ideal place is a niche under the trunk or in the frame of the room. Here you need to drill 4 holes for mounting the camera itself and 1 - to stretch the cable.
Next, you need to connect the power to the general electricity of the car. If short contacts come out from the camera itself, they should be lengthened with appropriate conductors (they are often included in the kit). The power cable should be connected to the rear lights to enable the browser to start automatically when maneuvering rearward.
How to mount the cable and connect it to the monitor
It is necessary to connect the monitor and the camera to each other using a video signal cable. To do this, it is necessary to connect the cable plug to the corresponding output, and their coloring will not allow confusion with the connection.
It is best to "throw" the cable under the sheathing or in specially designated places, thereby protecting the wires from breaking. After connecting the wires, make the settings on the monitor, where connect the rear camera to the working position. Here, change the polarity to battery mode.
Dear users, our editors concluded that the best option is a universal rear-view camera. If you have any questions about the installation or want to share your opinion, write to us in the comments.