✂ Self-adhesive foils for furniture: practical option fast repair

What is contemporary furniture made of MDF: it is compact and self-adhesive base film. Furniture prefabricated film pull on base and using a hot press give it the desired shape. But, after some time, the laminate comes into disrepair, and raises the question of maintenance. There are several solutions to the problem, one of them - use a similar self-adhesive, which is sold in stores for household purposes. How to pick the right material and use it to repair and decoration - in the review of HouseChief edition.

What is a self-adhesive

So, what is self-adhesive film, the way it looks? This is a very comfortable material to update not only the furniture, it can help to freshen up any room.

The film itself has three main layers:

• outerHaving a coloring or drawing a smooth, matte or glossy, possibly with the textured surface,
• the adhesive layer with the compositionFirmly securing the trim on almost any basis;
• blanket - wax paper, which is removed prior to installation and keeps the adhesive layer of debris falling and premature drying.

As a film-made self-adhesive

Film is manufactured in two basic ways:

• casting - this option is used in the manufacture of furniture in large enterprises. The result is a very robust and can be operated for a long time, even at elevated temperatures. Such films are mounted only on items with a perfectly smooth surface of the MDF or chipboard;
• calendering - a film produced by this method, is mounted easily, but may eventually shrink. Sold in rolls and is used to decorating furniture, Doors and other items.

For your information! Self-adhesive film perfectly protects the surface of objects from mechanical damage and moisture penetration.

The material practically free of flaws

On which side do not look at the self-adhesive - it consists entirely of advantages. What in the bank of the advantages:

Is there in this "ointment" at least one "fly in the ointment?" If you dig, the shortcomings can be found everywhere. In self-adhesive, perhaps, only one significant drawback: it is very difficult to stick to the base with a complex geometry. We can not say that it is absolutely impossible, but requires skill and the utmost care for the job.

Self-adhesive selection criteria

The film with the adhesive layer has a lot of varieties to choose the high-quality material that is suitable for your repairs? There are a few guidelines that will help you solve this problem.

If the product will be in a house in a heated room, it is sufficient material with standard characteristics. If you decide to register in this way, for example, garden furniture - then try to trim a polymer coating that is resistant to freezing temperatures.

For a perfectly smooth surface you can use any type of film, but if you are not able to grind and level base - look material with a multilayer dense structure.

An important factor - the visual design of the film. Color and painting - all this must match your decor.

If you just want to protect items from external influence - used transparent film.

For children's rooms it is preferable to select the view from the thematic pattern. In the bedroom, where a quiet atmosphere is important, will look great natural colors and wood imitation. The kitchen is popular glossy materials which are perfectly clean and protect furniture.

From cutting to gluing: the secrets of self-adhesive mounting

All work must begin with accurate calculations. And with regard to self-adhesive is usually more than ever, actually. The thing is that the attempt to glue the material you will have only one, so that there are no flaws can not be. You do not get to tear off the tape and stick it securely for the second time. The adhesive layer after such a maneuver partially lose its properties, and the adhesion will be not so good that will certainly affect later.

Therefore, if you measured the base - make allowances. Excess is easy to cut, if something is in the process of pasting did not go according to plan.

To make a complex configuration more certainly come in handy. To work with the relief you will also need a decent allowance, as for a tight fit is necessary to stretch the film, and this is necessary for it is convenient to take.

If self-adhesive pattern or ornament - here, as on the wallpaper, the selection is important. Cutting of such a material is produced by the front side to perfectly align the pattern parts.

Preparation for pasting film

From a careful surface preparation a large part of the success depends. The slightest irregularities and even tiny particles from entering the garbage under the material will lead to a noticeable marriage.

Council: For furniture, you can use a specialized putty for wood or homemade composition of PVA glue and a conventional finishing putties. Composition bred in small amounts and applied very carefully, since after the curing is difficult amenable to grinding.

After basic training thoroughly remove the dust and dirt completely dry, and remove substances reactive with water.

Friable surface aligned acrylic primer. If the hand is not specialized - you can use PVA glue.

options for pasting

To get a perfect result - you should know a few tricks. You need to start working with a small area of ​​the horizontal arrangement - train here easier. The doors of the cabinets is better to remove. You take the time to loosening of the loop, but further work will be much easier.

The second secret - do not choose the lowest-cost thin film for a first experience. Thicker and more expensive material falls easily without folds and bubbles.

It is necessary to pre-wet the surface from the spray water with a few drops dishwashing detergent. Then the film is removed from the paper layer, it is superimposed on the glass, then the air bubbles are removed. They can expel a soft cloth or a flat trowel. After the coating is tightly laid on its place can be cut allowance at the edges.

algorithm is slightly different to the grounded plane.

Another way of pasting - from warming of the film. The high temperature makes the material is very soft and elastic, it is well stretched on the irregularities. Warming up can do with the building, or even a conventional dryer or slightly heated iron. When the film surface is heated, there may be irregularities, bubbles, but after cooling is stretched, and the defects disappear.

If you are running iron, iron goes through a sheet of paper. In this way, do not get treated uneven surface, this can be done only a hairdryer.

Heating very gently helps draw angles. For this film is slightly tensioned, ensuring tight encirclement, and then cut the excess around the edges. Thick film of good stretches and breaks.

If you need to dock the two webs, the film should be glued back to back, overlaps will be too noticeable. The seam has turned out neat and inconspicuous, first leaf paste the butt, and then through two layers of a sharp blade cut through to the core. After the excess film is removed. I should get a neat seam.

Small video course on working with self-adhesive:

Examples of self-adhesive interior decoration

The film - a bright and strong, gives a lot of room for imagination.

Thus, the self-adhesive film - it's comfortable, durable and beautiful material for furniture restoration and interior renovation.

If you have used the self-adhesive, write about it in the comments to talk about their impressions of the material, it's very interesting!