Cleaning the water cooler: how to clean their own home, the sanitation of their own hands, as is often necessary disinfection, treatment and care

Coolers with clean water are in almost every institution. Such a device will definitely see in the public reception and hospitals, gyms and beauty salons. But most of all to the device used to office workers. Breaks in the cooler become for them an integral part of the working day.

But in order to cool liquid glass or mug of hot tea really benefited, for the device to be watched. Although bottled water and passed through several stages of purification, having been in the container for heating and in contact with the items of cranes, it may lose its freshness. Therefore, to maintain sterility require regular cleaning of the cooler water.

Why cleaning the cooler

If the device is a home and is used only in the apartment, it is unlikely to cause dangerous injury. Another thing, when he was standing in the office and have unlimited access to it. Anyone - support a huge number of bacteria. If the individual who contacted the cooler, there are pathogens, then the probability that they will fall into the apparatus, is very high.

A striking example serves worker who brings fresh water bottles and changes to the device. Chances are that he washed his hands before the operation, zero. But he immediately reveals the container and touches the neck of the instrument. It is also the case that when you mount new bottle errors occur. The installer may forget to remove the security label, which closed the neck.

The more people who come into contact with the device, the more likely that harmful bacteria can get inside. A moist environment - this is a paradise for microorganisms. In it, they begin to multiply rapidly, and soon you will see a nasty biofilm, which appears on the surface.

The cause of such precipitation can not only be inscribed dirt outside. The water itself is not enough purified. Therefore, we recommend a closer look closely to the suppliers. After drinking to moisture has been awarded the highest category, it must be tested according to 90 indicators.

Another reason for the necessary cleaning of the cooler performs banal scale. Although the damage to health from her no, but it spoils the taste of the water. In a normally operating the instrument scale will inevitably appear. If not, this is also a reason to switch to another provider - this means that instead of drinking it brings distilled water. It has no minerals, which are precipitated during heating. A long use of such water can seriously damage health.

Descale required not only due to the fact that it spoils the taste of the drink. A large number of its important sites on the device will lead to the fact that it will begin to work with the increased load and one day simply refuse. Need repair and replacement of parts. And it will be costly.

Features cleansing at home

There customer service, which can bring a cooler for inspection and prevention. It is also possible to cause the master address. He will disassemble and clean the machine directly into the home or office. But the operation is not as difficult as it seems. Deal with it on their own will be able to anyone who is not afraid to deal with the technique.

The cooler can be cleaned in several ways. But that the machine continued to operate smoothly in the future, it is necessary to observe some rules.

When working with a drinking device prohibited:

• use an organic solvent;
• applied abrasives;
• disinfect steam;
• use devices operating under pressure.

It is also not recommended to use any tools, Which can scratch the parts in important nodes of the device. This can lead to breakage.

Before we proceed directly to the instructions on how to clean drinking mechanism, you need to think about the preparations. It is necessary to have at hand all the materials that will be needed in the process of. Also required to think about the safety of both the people around them, and the person directly executing the cleaning operation.

Cooler, always unplug from the mains. Since the machine all the time keeps the water in one of the containers in hot, you need to give it time to cool down. The best time to start the process - when bottles run out of water, before installing the new capacity.

The device is desirable to establish a rubber mat. outdoor unit a better deal right in his place, and desktop It can be transferred to a convenient cleaning. If there is a special pad, you can use an ordinary plastic wrap.

Next you need to remove the remaining water out of the appliance. Under the substitute air valves and the water tank is drained fluid alternately - starting, for example, with hot. The simultaneous opening of valves will lead to disturbance of the effectiveness of disinfection, so take the time you need.

Through all the water taps will not work, because the tank is always its supply. To remove it is necessary to find the drain valve. Depending on the model, it can be located in the back wall or on the bottom. Perhaps that would have to tilt your device so that the water came out completely.

Now you need to prepare for rubber gloves, lint-free cloth and brush. The latter can be replaced by an ear stick. It requires simple detergent for dishes, a soft brush and paper towels. After gathering the necessary, you can start the treatment.

Step by step instructions cooler cleaning

Consider how clean the water cooler. The operation takes place in several stages. To enhance the effect all the work carried out sequentially, starting from the outside of the device. Complete thorough washing to remove residual cleaning solutions.

external cleaning

Contaminants that are on the outer surface of the easiest to be removed with soap solution. To enhance the effect, you can add a little iodine, or ammonia. On sale there are special solutions to clean the cooler.

The process performed in steps:

1. First dismantle the cranes. They are inside a brush, and thoroughly wash the outside.
2. Next in turn - drip pan. It was there that focuses most bacteria.
3. Sanitization of the cooler also includes a body wash bottle and place attachment thereto.
4. Butylepriemnik removed for access to the divider on the bottom of the tank.
5. Detail dismantled and must be thoroughly washed with soap and water. Then rinse well.

All removed parts are installed in the reverse order. Housing again is wiped with a damp cloth. Then, not to leave streaks, it is necessary to walk on dry paper towels.

internal cleaning

To remove dirt from the inside is necessary to prepare special solutions. Effective and safe remedy for the cooler itself, and for people - citric acid. It is well disinfects the surface, softening them bloom. Also perfectly it eliminates odors.

In 10 liters of water take 200 g dry acid. Means is poured into the unit and include it in the network. Install program for heating water, and at the maximum setting, the device disconnected from the electricity and leave it to stand for 6 hours. The liquid is then drained and rinsed with pure water insides. If necessary, the procedure is repeated.

You can buy in the store guanopolisept. This polymer does not contain an antiseptic chloro. Also, there are no aldehydes, and in small doses, it can not cause harm to humans. This was dissolved in water according to the instructions and fill in the cooler tank.

The unit includes a snare, and left in the heating mode at night. During this time, it is necessary from time to time to pour a small portion of the water through the taps. After 24 hours, all of the liquid is drained and washed well with the indoor unit. Rinse continue until the water disappears off-taste. If there is suspicion of a lot of pollution, the treatment time is increased, or the process is repeated.

Tips for self-purification of the cooler and the prevention of pollution

If you constantly follow the work of the unit, as well as conduct regular maintenance, it is possible to shorten the time between cleanings.

5 simple tips to help you keep the device in order:

1. When changing the bottle receiver wipe clean dust wipes. Better to take alcohol-based.
2. The water from the sump to drain as much as possible, and valves thoroughly cleaned weekly.
3. Before installing a new bottle to wash your hands with soap and water.
4. Pieces are not removed in time labels can get inside the cold water tank.
5. You can not use the device in normal tap water, because there is no filtration system.

Before use of the device is recommended to study the instructions to him. The manufacturer advises to engage in cleaning every six months. But knowing in what a deplorable state is our drinking water, many experts believe that this operation should be carried out on a monthly basis.

conclusion

To avoid contamination of the body by harmful microbes requires regular sanitation cooler. Such operation is simple and only requires accuracy during removal. Conduct regular internal and external cleaning you will be confident in the quality of drinking water and not worry about their health.