Water cooler with bottom loading water: outdoor, black with bottom loading bottles, review models

In the home appliance shops offer a wide range of coolers, which differ in shape, size, performance and functionality. One of the most popular is considered a cooler for water bottles with bottom loading, combining practicality, impeccable functionality and stylish design solutions.

Kinds and features of cooler water from the bottom of the bottle loading

Cooler water from the lower water loading - it is a simple and convenient device for feeding and dispensing the bottled water. These models are popular with consumers because it combines high functionality, reliability, ease of use and long service life.

The main feature of this model of the cooler - the location of the bottle with the water in the lower part of the structureWhich is covered by a special door. With this appliance is very simple, and the capacity of the replacement does not require physical strength.

Features coolers with lower-loading:

• water bottle is located in the lower part of the structure covered with a door - thanks to this device is stylish, elegant design;
• equipped with two or three taps for supplying hot, cold or ambient water;
• compressor or electronic type of cooling system.

Devices with lower load combine the compactness and functionality outdoor coolers, So they can easily be integrated into an office or kitchen furniture.

Water coolers with bottom loading bottles are considered safe for health. Installed capacity through the door is fully protected against the penetration of sunlight. This minimizes the chances of reproduction of pathogenic microorganisms.

Advantages and disadvantages

The main advantage which is cooler with a lower outdoor loading bottles - simple and easy replacement of the water tank. The bottle does not need to raise a certain height, exerting considerable physical effort. Therefore, the replacement vessels may and women.

The advantages of cooler water from the lower loading:

1. The ease and convenience of the tank replacement with water.
2. Practicality and versatility.
3. Elegant design that fits into the interior of any premises.
4. High hygiene and health safety at which eliminates disease-causing bacteria in the bottle.
5. Advanced features - the possibility of selecting the operating mode to the bactericidal treatment of water.

Aggregates differ depending on the cooling system which can be electronic or compressor. Each of them has its advantages and disadvantages. E-type device is lightweight, quiet operation, to transport in a horizontal position. In case if you can not carry the device horizontally, before transporting the cooler you need at least 4-6 hours unplugged.

Among the disadvantages of electronic cooling system in coolers with a bottom loading water - minimal performance indicators (up to 1 liter per hour), and the possibility of reducing the temperature not more than 10-15 ° C from room temperature.

Devices with compressor cooling systems, attracted the attention of high-performance customers (2-3 liters per hour), the possibility of water cooling to 4-5 ° C, even in a room without air conditioning.

The disadvantages of compressor coolers are considered high cost, the need to transport in an upright position, and also have a large weight which may reach 25-30 kg. If the device has been installed on the floor of the rough surface often appears a loud noise, vibration during operation.

How to choose a cooler with a bottom loading

Choosing cooler with bottom loading water for the home or office - it is a serious problem that can confound any buyer.

By purchasing the cooler must take into account the presence of additional functions. Many manufacturers offer models that are equipped with sensory or digital monitors, signaling that the water is over.

With their help, you can set the desired temperature and time of the Auto button. To use this cooler is very easy and comfortable, but its value is several times higher than the standard unit.

By what criteria

To cooler purchase was successful, and the instrument purchased corresponds to the amount spent, it is necessary to take into account the main criteria on which the experts advise to choose the device:

1. Estimated unit costs - if you are planning to buy an inexpensive cooler, it makes no sense to watch premium model with a variety of functions.
2. Value for money with quality instrument - for this before buying the best acquainted with consumer reviews.
3. Type installed system cooling - electronic or compressor.
4. Power cooling and heating water.
5. The presence of security features from accidentally pressing the hot water tap.
6. Consumption of electrical energy.
7. sound volumeProduced during operation.
8. Security - before you buy be sure to confirm the quality of the insulation device.

In many models of coolers with lower water supply has a special stand for bottles with water, which makes their use more convenient.

Popular brands and models

A huge variety of coolers model with bottom loading water can be difficult even when choosing an experienced buyer. Quickly navigate the range of the Russian market will top most popular devices, created on the basis of customer feedback.

VATTEN L45

One of the most low-cost, simple and reliable water coolers with lower load, which completes the rating of the most popular models for home and office. The device is presented in three colors. Equipped with an electronic control system, three cranes for supplying hot and cold water, as well as liquids at room temperature.

HotFrost V115A

The fourth most popular model, which Control is simple, compact and sleek design. Valves for water supply function after clicking mug, work with cooler bottom loading noiseless.

HotFrost 35AN

Third place in the list of popular cooler bottle with bottom feed. Made in black with silver accents. The water supply is carried out by means of three taps, the tap has a protection function with hot water from accidentally pressing. Characterized by ease of use, practicality and functionality.

HotFrost 350ANET Gold

Model, which is in second place in the popularity rating according to customer reviews. She It attracts a stylish, elegant design, thermoelectric cooling system and touch control device. Thanks to the innovative system, heating water in a few minutes is heated to the desired temperature.

Ecotronic C11-LXPM

Cooler premium, which tops the list of the most popular coolers with bottom loading water. The exclusive device is made of stainless steel, are controlled using the multifunction touchscreen. Individual attention, neon suspension and special withdrawable shelf for installation of the bottle with water.

How to set the bottle in a cooler with bottom loading

Replacement bottles of water in the cooler from the bottom of the water supply is carried out very simply. The device must first be disconnected from the mains. With the water tank must be removed, unscrew the cover film and.

After this, insert into the neck of the bottle suction tube for water, securely fixing the protective cap of the siphon. Then, the reservoir can be filled into the slide cover and the cooler door.

When the container is replaced, the device must be connected to the power supplyWait until compartments for cold and hot water is fully filled. This leads to the automatic inclusion of the water pump.

Rules of operation of the cooler with a bottom loading bottles

To provide reliable, efficient and smooth operation of the cooler with bottom loading bottles need to respect the basic rules of its operation:

1. Device feature only on a flat surfaceAway from direct sunlight and radiators.
2. Distance to the wall or pieces of furniture should be at least 9-10 cm.
3. Efficient operation of the cooler is only possible at a room temperature of 0 ° C to 34-35 ° C.
4. The pump unit must be regularly inspected for cracks and leaks and cleaned of sediment.
5. The time interval between the insertion of the device should be at least 3-4 minutes.
6. For cooler with a lower water feed It uses only high-quality, purified bottled water.

results

Coolers with bottom water supply - this is one of the most popular and sought after models, widely used in office and home use. These models feature excellent functionality, practicality, ease of operation and long-life operation. Due to the cooler process of feeding and drinking clean water becoming more comfortable and pleasant, while its stylish and elegant design to complement any interior.