Some models have the ability to work through the Internet. At times, this factor can also cause the error.
CONTENT
- 1 Why the error "Disk is protected from recording" may appear
- 2 As mechanically unlock a protected write stick
- 3 How to remove on flash write protection programmatically
- 4 Program to eliminate errors "Disk is protected against entry»
- 5 As media format, if the flash card is write-protected
- 6 What should I do if the disc is protected against recording due to viruses
Why the error "Disk is protected from recording" may appear
There are plenty of trivial reasons, which may adversely affect the ability of Flash-drive record data from other devices. If the problem is not serious, it can be solved in a few minutes. So let us just the main thing.
- Older models of USB-drives and other variants of flash drives are equipped with a special lever switch, which is usually on the side of the body of the gadget. If it is accidentally moved, then there is exactly the error that is now talking.
- The impossibility of recording data on a USB-drive can occur even if the program fails, the operating system Windows. This happens when properly installed updates, as well as in case of default on a PC provided a ban on the reception and transfer of information between the operating system and a flash card of any type.
- Viruses on the storage flash drive can also cause errors and an inability to record the necessary information on a removable USB-drive. Usually, this kind of problem cause "Trojan horses", "worms".
- The lack of drivers on the computer for a specific system unit connector. In this case, you can try to connect the gadget through another panel or to make a driver update.
- Incorrect operation. If the device has been removed from the connector at the time of information recording in the future may receive protection, since the device will recognize as an unnecessary filling of the stick.
- In the end, the cause may be the most stick board failure. In this case, correct the problem will only new storage device or the soldering of its board.
NOTE! (Click to see)
Error "The disc is protected against recording" may be reserve in the event of termination of the stick. That is, if the number of times recording and formatting exhausted, respectively, use the device is no longer possible.
Getting Flash-drive in a moist environment may also serve as a negative factor for the occurrence of similar problems.
As mechanically unlock a protected write stick
Despite the fact that the function of the write protection on a flash drive has become particularly popular, it is often necessary to remove this restriction. If this property is set by mechanical means, then to remove it, you must do a few simple steps.
- The first device to visually inspect for the presence of the corresponding mikrorychaga. Usually it is located on the side of the hull.
- Next, try to move the knob in the opposite direction, then insert the flash card into the appropriate slot.
- Try to copy some data from the PC to the gadget. If you succeed, then - protection has been included deliberately.
Sometimes these manipulations do not save, so users need to think what to do next. In fact, there are still many ways to solve this problem.
Removing protection from a flash drive can be carried out manually if the restrictions are set in this way.
GOOD TO KNOW! (Click to see)
If you try to carry out the transfer of information on a flash drive from a digital camera or smartphone, then you can try to use other adapters or adapters if available does not allow to copy the information.
How to remove on flash write protection programmatically
When it is not possible to mechanically remove the write protection, the problem in the software. Accordingly, to eliminate this error only succeed with the help of special tools. However, most of these programs work on a fee basis. Therefore, you should choose the best option among those who are able to once and for all, to cope with an error entry and formatting Flash-drives.
Some flash block using an individual password, so use other methods to crack the drive inappropriately.
How to remove the lock from the command line, if the flash drive writes "The disc is protected against recording"
Surely, every user knows what the command line and how it can be used. Today, we look at how to unlock the protected flash drive, and finally throw him the necessary data. For this purpose, we are acting on the icon below algorithm.
- We introduce our removable storage device into the appropriate slot or laptop computer. Then go to the "Start" menu and activate the "Command Prompt". To do this in the search, select «cmd» and press Enter.
If the problem entry error persists, try plugging the gadget via a separate adapter or card reader.
- Next, we will work directly in this window. First introduce «diskpart», then prescribes «list disk» and press the button
The disc can be protected from recording in case of breakage of connector pins.
- The program will transfer you to a window with the drives that are currently operating on a computer.
The cause of the error can be even occasional bump or drop the device.
- Further prescribes select disk command to the number (2 in this case), your flash drive can take place more
If your computer displayed an error when working with flash drives, try connecting it to another device (eg, laptop).
- Next, the team will give account, that the "Disc Set." We continue to work and enter the following command to clear the attributes «attributes disk clear readonly». Press the «Enter» button.
Perhaps the disk is write protected automatically because of lack of space.
- After the performed manipulations try to overwrite the external drive.
If this procedure does not lead to success, and the device is still inefficient, we will try other methods of solving problems.
How to remove the protection in the Windows registry, if protected from the recording disk
operating system registry is also able to perform certain tasks in order to establish the normal operation of the removable media. Next, step by step look at how to perform the algorithm correctly.
- In order to activate the built-in utility, you must start from the menu to find the command "Run". Then make a right click and select "Run as administrator".
Please note, if the flash drive is inserted into the socket correctly when displayed error "Disk is protected against recording."
- Then enter a blank line following path: «HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ StorageDevicePolicies» and press the "OK" button.
On the laptop special protection by connecting USB-drive can be installed, especially if it is your work computer.
- The program will take you to the location where you need to find the appropriate section. If this is missing, it must be created. Click "Create" to "the Control" folder. Then give the name of the section «StorageDevicePolicies» without the quotes.
The disc can only accept small-volume files, and the rest - as malicious.
- In the formed section is necessary to organize the following utility. To do this, click on the folder that you just named, and then right-click to open context menu and click on the button "Create". Next, we register the same parameters as shown in the photo.
Often the license stick from Windows 10 are write-protected program.
- Next, click on the tool created by the left mouse button and activate the "Change" button. Make sure that the resulting instrument has a value of "0". See photos.
If you have problems recording, you should initially check the media for errors.
After you have done the settings required to restart your computer and re-connect the removable media. The device is now available for recording any type of data.
Deprotection by using Local Group Policy Editor
Every time when a new portable devaysa Windows automatically adjusts the driver and synchronizes it with the appropriate device. To enter the Enclosing the program, you will need to enter a few commands.
- We open our editor, for this purpose press the key combination on the keyboard Win + R. In the resulting window, enter the command "gpedit.msc" without the quotes and press the "OK" button.
Sometimes, to get permission to send information on the performance of a storage flash drive, you must use the password you set.
- The operating system opens a window in which you must do the following: run the folder "Computer Configuration", then "Administrative Templates." Then search folder "system" in which opening "Access removable storage devices." Here you select the item, which is responsible for your removable media and click "Remove entry ban" (in your version of the operating system currently can be prescribed in other words).
If errors are found on a flash drive, it is advisable to restore the storage disk.
If the problem persists, you can contact support your gadget manufacturer. However, it will take some time, it is easier to buy a new drive version of the budget.
Program to eliminate errors "Disk is protected against entry»
There are several popular options of third-party programs that allow a reliable way to get rid of the problem of data recording. In this section we consider some elementary applications interface.
JetFlash Recovery Tool - software for removing protection from Transcend
Most miniature flash drives often have similar error, this may be due to exhaustion of the recording / formatting reserve.
The program is equipped with many functional and extremely intuitive interface. With the help of this utility you can quickly fix the memory card from Transcend's mistakes, as well as devices running from USB.
Check Disk - suitable for any type of media
To make sure there is an error, try deleting unnecessary files from the drive. If you did not, then the write-protected disk.
The program is designed specifically to work with computers and USB-drives. This tool will not only help to fix a problem with the recording device, but also to set up the correct formatting. In addition, the application is allowed to carry out full monitoring of the available hard drives.
Other means deprotection
Often branded flash drives manufacturer, for example, Apple's, do not accept the transfer of data from the other brand devices.
In addition to specially designed for a specific flash card programs, there are also universal model. It is their ability to take a brief look on.
- This variation of the software is more suitable for owners of Apacer gadgets. If the instrumental method, the computer system is not understood or refused, you can use the declared items. The application can be left unprotected and successfully format the disk in a few minutes.
- AlcorMP - means a user friendly menu. It is even for beginners, the interface there is a possibility of Russification. In addition to their regular tasks, the ability to restore the gadget performance for data storage.
- HP USB Disk Storage Format Tool - means suited to many USB flash drive, so is able to format any compatible device on Windows. In addition to unlocking with removable media, the tool allows to create a bootable image.
GOOD TO KNOW! (Click to see)
On your device can be set not full write protection, and specifically to certain folder. To avoid this, try to drop one file or folder from the USB device and vice versa.
As media format, if the flash card is write-protected
If the protected flash drive is not formatted in a standard way, then with the help of third-party services, to solve this problem most likely. It is better to use special software that is designed to solve the many problems with the stick.
Before attempting to format a disk, make sure if you need the content, because the recovery of cleaned data will not be available.
It is considered one of the best program HUDS Format Tool, which is able to format the drive and remove the error at the same time. Each version of the application is enabled for download free of charge.
- Download software, then plug the USB flash drive into the appropriate computer slot.
- Next, run the utility, select the method followed formatted media.
- You only need to configure the file "the NTFS" system and be sure to tick the recording "Quick Format."
- Click "Start" and wait for the formatting is complete.
After the performed actions removable storage device must be suitable for recording again. When this method does not solve the problem, it's time to think about the mechanical failure device.
How to identify a USB flash drive, if it is not formatted with the following error "Disk is protected against entry»
Reasons why the system does not recognize the device may be a large set, starting hardware, program ending. However, you can activate formatted devaysa, even if it is not identified by the system. Most often, a similar problem is a conflict of file systems on the removable media and your computer.
Often when installed protection even carrier formatting can not be performed.
To drive the system display, you should try to format it in the appropriate type, as in your version of Windows. Most often windose has a file storage in the NTFS format, and installed on a flash drive FAT-23.
When formatting is necessary to select the NTFS format, which further makes it possible to read the device as related.
Utilities to format removable media / flash drives
If you manually using the computer's operating system means you can not format the user may try to take advantage of third-party applications. Consider what the utility can be used to correct the error data records.
- SD Formatter for microcard. The software, which is able to revive the memory cards for mobile phones, digital cameras and tablets. Means capable of operating in a variety of formats and automatically configure the optimal method of cleaning cards.
- EzRecover - program, which is recognized as one of the most user-friendly and indispensable on your computer. When you can not only release the removable drives, and remove the force protection installed this software.
- MiniTool Partition Wizard - comfortable side of the program, which combines the most different functions, they will help the organization to eliminate errors associated with the impossibility of writing to the disk. It allows you to create different types of boot images.
Besides the fact that it is important to download and install each of the programs, you need to learn how to use it correctly. Immediately prior to the removal of errors on a flash drive with restrictions should be thoroughly acquainted with the internal interface.
GOOD TO KNOW! (Click to see)
It should be borne in mind that in the process of formatting the program starts searching for inefficient units, adjusting their function normally. If there is an extensive amount of bad sectors, the cleaning operation can be delayed for a long time.
What should I do if the disc is protected against recording due to viruses
Often, when virus infection on a flash drive problems gradually. Sometimes the device hidden files and folders, but more often there is an error writing to disk. To "cure" contaminated gadget, you need to clean it, Antivirus program.
If you are unable to complete the formatting of the stick, most likely, it has malicious files or software.
Sign in protective application installed on your computer, select the device that you want to scan, then remove the contamination found. After that, remove the USB flash drive from the PC and plug it in again. After this protection problem must be resolved. Otherwise, you will need to perform a re-flash support, but are engaged in professional service centers.
Dear users, if you have any questions about the errors in the USB, or SD-media, be sure to write in the comments. Share your experiences, you have got to get rid of write errors on a removable drive.