Cleaning the plate of fat - a mandatory event for each family, accustomed to maintain the kitchen clean
CONTENT
- 1 Features and purification procedure plate fat
- 2 What are the materials and tools needed for the job
- 3 The clean gas stove
- 4 As various wash of the plate
Features and purification procedure plate fat
According to statistics, the greatest amount of dirt in the kitchen, regardless of the cleanliness and neatness hostess collects it on the stove, because every day there comes the cooking process food. All these boil, fry or steam harm the purity, and it takes some time to reach the desired state of the surface.
To cleanse the old stains will require a lot of effort
According to the accepted rules, to carry out the process of cleaning the kitchen is required every day. This does not mean that the required daily use chemicals or other aggressive means for cleaning. Subject to regular cleaning, you can use only a soft damp cloth, which will remove carbon deposits, fresh traces of grease, sludge or leftover food.
This rule applies only directly frying surface. But the plate still many structural parts, which are also spoiled with time. It handles, grille, the inner surface oven. They are recommended to be cleaned three times a week, and wiping with a damp cloth.
To achieve the purity required to clean not only the cooking surface, but also all the details
Before starting the cleansing process, you must perform a series of training steps, including:
- overlap the gas supply is required for safety reasons;
- removing all grids and burners as cleaning of these parts is carried out separately;
- no harm will be to prepare the rubber gloves to reduce the impact of detergents on the skin;
- preparation tool and cleaning solution, when using them, or for the preparation of the compositions according to folk recipes purification.
After performing the preparatory procedures can proceed directly to the process of removing grease or soot formed after cooking.
The market can find a large number of chemically reactive synthetic means
What are the materials and tools needed for the job
To the process of cleansing the dirt and grease went quickly and efficiently, it is recommended to prepare all the necessary tools and cleaning agents. This list may be different, but, in general, should include a number of mandatory items:
- cleanser or solution is not recommended to take abrasive paste, which may cause damage to the enamel;
- soft brush or sponge;
- lint-free rag desirable;
- rubber gloves to prevent skin damage hands.
The use of gloves is mandatory, so as not to collide with an allergic skin reaction
Some may feel that for a gas stove suitable scrapers, which can be used with the induction hob. But their use is allowed only in the most extreme cases, to prevent damage to the enamel coating, which will lead to the rapid appearance of rust.
IMPORTANT! (Click to see)
It should be borne in mind that even the most publicized means to cleanse the plates will not lead to an instant positive results. Each formulation is required to put on some time on the surface of the spots, and only then start cleaning.
Do not think that the use of even the most expensive tools instantly remove dirt. It will still have to put structure and sustain it for some time
The clean gas stove
There is a lot of money domestic destinations, which can be removed quickly and efficiently dirt, grease or soot from the surface of the gas or any other of the other plate. But not every woman aspires to use the present compositions due to the two objective reasons: their considerable cost increases in the degree of effectiveness and harmfulness.
TONOTICE! (Click to see)
In many cleansers can still meet chlorine, which leads to irritation of the mucous membranes of the respiratory tract and causes allergic reactions in the skin.
Soda, vinegar and citric acid - the first assistant hostess purity loving
A good alternative to the purchased products is the use of popular recipes, tested more than one generation.
Traditional recipes
For the preparation of the detergent composition it is not necessary to purchase chemicals or finished synthetic means. Everything can be prepared from readily available components, knowing the recipe.
Soda can work wonders, leading to rapid fouling and fatty softening dried spots
Baking soda
Leader among the cleaning products that you can find on the shelves of any kitchen. It has a good level of degreasing surfaces, it is safe for health and is mere penny. To achieve the desired cleansing and does not damage the enamel, should first clean the surface of the plate slightly damp sponge to create the conditions for the softening composition of the powder, thereby preventing damage coverage. Next, a small amount of ash is applied to the stain. It must be left for at least half an hour, which will lead to a softening of pollution and its to easy removal by the usual rags.
Use a mixture of vinegar and baking soda will ensure a quick and stunning results
Vinegar and soda
Another way of getting rid of chronic fat spots on the plate surface of the gas is the use of tandem vinegar and baking soda. The difference between the simple treatment with sodium hydrogen carbonate lies in the fact that instead of water in the dirty surface is applied by atomizer vinegar. Further also poured soda, and after a certain time it will be removed with a cloth.
TONOTICE! (Click to see)
It is possible to use one vinegar, which is applied to the surface of the plate or a separate spot and left for 20 minutes, then removed with a damp cloth or sponge. But the effectiveness of this method is somewhat lower than when using baking soda.
Citric Acid standing inexpensive, it has unique properties which lead to the removal of fatty plaque
Lemon acid
The third component, which is actively used for cleaning dirt. Instead of acid can use lemon juice is the usual. Previously it should be dissolved in a small amount of water to reduce the concentration and acidity. Next, the resulting solution was applied to the surface and left for at least 15 minutes. Also, when using a conventional lemon they can be cleaned with inveterate stains instead of sponge to soften the grease or soot. Next, the wet composition is removed with a soft cloth.
Ammonia, despite a sharp odor, has the property of purifying virtually any surface
Ammonia
This material can be used as an independent means or mixed with anise drops only immediately follows Note that a similar cleaning composition will require a certain strength of spirit, as both substances have a strong aroma. For the cleaning composition is required to dissolve a teaspoon of alcohol a spoon in a glass of clean water. The resulting solution is applied to the surface of the plate and left for 15 minutes, then everything is removed with a cloth.
Folk recipes contain a wide variety of auxiliary components which can be successfully used for cleaning plates from fat. Among other means can be mentioned:
- soap solution, which is made on the basis of soap;
- mustard powder;
- saline solution;
- glue;
- Activated carbon.
Selection of a particular method is for the hostess. If you do not want to wait and prepare special compositions, then the only option would be the purchase of synthetic means.
Household chemicals
On the shelves of specialty stores, you can find a wide variety of tools for cleaning of fat. They differ in cost and quality, so when choosing the best to rely on the testimonials of people already had time to try out one or the other part.
Sanita Spray 1 minute - a convenient and easy application form
Sanita Spray 1 minute
Among the top products by many as the composition, which is available in a convenient spray bottle, making it easy for application. The name of the composition entirely justified - just one minute Spray copes with a hint of fat. While leaving it on the plate up to 10 minutes to even the most inveterate stains clean. Despite assurances from the manufacturer that the spray is not able to cause allergy, it is recommended to use it with gloves. Product cost is 107 rubles.
Review on Sanita Spray
More on Otzovik: https://otzovik.com/review_623295.html
Cillit Bang Antizhir provide not only the removal of dirt but also give perfect appearance plate
Cillit Bang Antizhir
Another quality product, whose use helps to quickly cope with the pollution and grease stains. It can be used not only to clean the kitchen, but also to remove dirt in a microwave oven, a hood, a home appliance. Ease packaging presence sprayer allows very economical use of the composition. Despite the lack of an explicit smell, using a can form noxious fumes, so it is recommended to ventilate the room. Product cost is 209 rubles.
Review on Cilit Bang Antizhir
More on Otzovik: https://otzovik.com/review_947731.html
Spray Schumann, despite the high cost and toxicity, it can be considered the most effective way to remove fat
spray Schumann
The product, which is the most expensive on the market, but it can rightly be considered the most effective. After applying it quickly removes even the most inveterate stains. But cost is not the only drawback. A second significant drawback may be considered as its toxicity. Secreted odor can cause an allergic reaction, which is why to use tool only in well-ventilated areas, and do not be amiss to add gloves respirator. The cost of the spray is 520 rubles.
Review on the Schuman for slabs
More on Otzovik: https://otzovik.com/review_6490205.html
As various wash of the plate
Stove - it is not only the cooking surface is still a lot of details, which is also in use can be covered with bloom, grease and soot. This means that during the "cleaning the capital" have to clean them as well. For each structural part has its own peculiarities.
Lattice
Purification of the lattice It will depend on its material of manufacture, as each has its own particular properties. They need to be considered when selecting the method to achieve purity.
To cleanse the iron it just good enough to calcine
Cast iron
Cast iron provides the most strong and durable materials for the manufacture of gratings. But it requires compliance with certain rules when removing grease and soot. The most effective method is considered to be glowing parts on an open fire, which allows for burning the remaining dirt and grease. This can be done over an open fire. In the absence of such opportunities to achieve the desired temperature can be achieved by the inclusion of all the burners.
IMPORTANT! (Click to see)
During the "toasting" process in the home must be quality ventilate the room to time to remove carbon monoxide, combustion products and noxious substances that may be released during combustion fat.
Upon completion of filament remaining dirt is removed by conventional cloth and grill just dried.
The best way to clean the enamel is lattice soaking in a soap solution
enamelled
Surface smoothness, lightness and resistance to moisture makes it easy to wash this type of gratings, and their can be placed even in the dishwasher. In its absence would be the most effective method of preparing a soap solution and immersing items to a couple of hours. Further residues simply washed away.
IMPORTANT! (Click to see)
When washing the glass lined gratings should not use knives or scrapers, or the probability of damage of the outer layer.
Stainless steel
The most durable and resistant to external influences material, so when cleaning such lattices permitted to use knives, scrapers or scourers, as well as any chemical agents. Maximum efficiency can achieve when soaking grille in soapy water for a few hours. Next, the softened dirt removed by brushing.
On operating as handles a large amount of dirt in the form of spray
Pens
A method of purification of handles, which are also covered by the spray droplets, will depend on their structure, exist as plates pattern where the element is removable and is not removable controllers.
removable handle
This is the easiest option. To cleanse all the dirt is enough to place the handle in soapy water for a few minutes, and then a clean sponge with detergent. Also, there is a prescription according to which the handle can be boiled in a weak solution of vinegar (the ratio of 500 ml of water in 200 ml of essences) over 10 minutes.
non-removable controllers
In this case, the purification process will require a little more effort. Tools to remove dirt and grease will be a toothbrush, cotton swab or toothpick. Among the compounds effective for cleaning refers mixture of lemon juice and baking soda. Pre-preparing this mass in which you want to dip a brush and clean the entire surface. Cotton swabs need to reach inaccessible places.
A simpler way is to use ammonia-anise drops. They should be applied to cotton disk controller and simply wipe the surface with a composition followed by removal of water.
Purification of the burners involves their removal, which allows access to the nozzle area where dirt can cause a drop in flame strength
burners
Clean the burners is also required regularly to prevent them from clogging, which may cause clogging of nozzles and reducing flame pressure.
To cleanse the need to remove the burner and just put in the soap solution. Suffice it to 20 minutes to soften the deposits of grease and dirt, and then just rinse the item under the pressure of warm water.
It is also possible to purge by means of vinegar, which is diluted in proportion 2 v. tablespoons per cup of water. When using a solution of acetic hotplate is placed in the boiling liquid for half an hour. If small holes are blocked, you can use a toothpick for their purification.
Upon completion of boiling, the dirt is removed through the cloth under warm water. The final stage will be the drying of the burners on the towel in the inverted state, that all the water can flow freely.
For softening dirt inside the oven can be simply put to a soap solution and heat it to 100 ° C
Oven
One of the most difficult parts of the cleaned plate is considered to be the oven, because it may be difficult to get the most polluted places. In this case, you can also resort to national methods.
The most effective solution is a soap that is applied to all surfaces of the oven, and poured onto the pan. After leaving the oven in this state for 20 minutes, it should be included at a temperature of 100 ° C and let stand until complete evaporation of the solution. Further, all the surfaces are wiped with a damp cloth.
Another method is the use of ammonia, but when used the composition should be caused to leave the oven at the surface during the whole night.
IMPORTANT! (Click to see)
The most important nuance when cleaning the oven is wiping it dry after cleaning in order to prevent the formation of stains and spots.
Regular care will allow the stove keep it clean and simplify the process of purification
Purification of the gas stove would be much simpler if the exercise routine care of her. Then when spring cleaning is required to make less effort. To prevent the formation of long-standing stains, it is recommended:
- immediately remove fresh stains;
- after each cooking plate to wipe with a damp cloth;
- carry out preventive cleaning at least once a week.
More time to see the most popular methods for purifying a gas stove from fat can be as presented.
