Of 6 kinds of screwdrivers best networking: how to choose which one to buy, the pros and cons, features, rating

Screwdrivers are not suitable for work in the field, where there is no direct access to the network 220 V. However, in everyday life and in the professional use of such a tool is widely used due to the high productivity and the possibility of long-term continuous operation. Some models are capable of partially or fully replace electric drills, screwdrivers that makes such a universal tool.

How to choose the power screwdriver

In passport screwdriver shall include all its specifications, but when you select should pay attention to the following criteria.

Power

This parameter directly indicates the power tool. In addition, depending on the capacity of the size and weight of the screwdriver. When you are choosing to be guided by the purposes for which the model will be used. For example, with periodic household tasks screwdriver handle capacity of 150 - 400 watts. If the tool is purchased for professional use in the construction site conditions, which often have to work with screws of 100 mm in length, the priority options for 500 watts or more.

Torque

The torque value is the force with which bit acts on the fasteners and, hence, determines the hardness range of materials, which can easily tighten the screw. In domestic models in the majority of cases it is in the range of 10-15 nm, while professional Screwdrivers able to develop a torque of 30 Nm and above. There are models provided with pulse mode where time can be up to 100 Nm.

revolutions

This option is for the screwdriver is not the main, but if the tool you plan to use part-time as a electric drill, A large number of revolutions will provide accurate neat holes. Having multiple speeds also make it easier to work with fasteners. For example, when screwing a large number of short screws speed is increased with a high revving tool.

reverse

Feature will work as a screwdriver to twist, and the twisting of the fastener. Reverse actually changes the direction of rotation of the cartridge, and therefore it must be on each such instrument. It is important to pay attention on how to switch. It is considered to be more reliable push button switch which is recessed on the one hand, and on the other - pops up. In the middle position this button locks the pressing start actually speaking fuse key.

Cartridge

On electric screwdriver set to one of the following types of ammunition:

• Quick - set both the domestic as well as on professional screwdrivers. Fixation bits is performed by the compression jaws by rotation of the threaded couplings. It is a versatile option, as it allows you to pinch snap with different shank types, thus quickly and reliably.
• Hexagonal type HEX - equipped with a magnet holder, which is responsible for the fixation of the bits in the cartridge. Installing or replacing equipment is carried out very quickly, and it is the hex chuck simpler in design. It allows you to easily set the depth gauge, necessary for professional work. But we should remember that the bit does not clamped, but simply inserted, is held by a magnet, because there may be a small gap.

If the power screwdriver, hex chuck will be used to drill holes under it bought a drill with a suitable shank. They are easy to find on the open market.

ergonomics

Besides buttons and the location convenience of having rubber inserts on ergonomic handle as defined by the form body tool:

• Pistol. The predominant majority of this form of the housing shows the direct connection of the motor shaft with a cartridge without any gear. This is characteristic of low-end models that do not have an increased capacity and do not have high-quality cool internal components.
• T-shaped - the handle is closer to the central part of the tool, and as a consequence - the weight is better distributed. In any case, each has its own characteristics screwdriver design.
• Classical (in the form drills) - the first sign of professional equipment. The weight of such models rarely falls below 1.5 kg, but the form itself implies a screwdriver in the process of the second hand.

Most screwdrivers have additional functions, for example, fixing the start button, a smooth speed control. Their absence does not alter the technical characteristics of the selected model, and is used exclusively to improve the comfort of operation. Because the need for each function defined by the customer, based on the conditions of use of the tool.

Best network impact screwdriver

Screwdriver with impact mode Makita TD0101F with a cartridge type under HEX bits intended for domestic use. The underlying motor 230 W, which turns regulated within a wide range, which compensates for the presence of only one speed. The peculiarity of this model - automatic start pulse mode at 3.2 thousand. beats per minute when the screw comes with a great effort. It allows you to work with and become attached nuts "complex" screws. But screwdriver to hammer mode quite noisy, and the manual shift is not provided in the unstressed work. In addition, there is no engine brake and stop, which allows to control the depth of screwing fasteners.

Screwdriver housing with a handle received rubber inserts for retaining the convenience, there is work light, implemented in the form of a ring surrounding the cartridge fluorescence. The presence of the reverse of the standard chuck and hexagon can be used as a model wrench small bolts and nuts. Given the purpose of the model, continuous non-stop operation under load causes the heating of its engine, that you should consider before buying.

Characteristics

• Engine: Power - 230 W, Power - 220 V.
• Torque (max.) - 100 Nm.
• Number of speeds - 1.
• Chuck - 1/4 HEX.
• Hammer mechanism - is.
• Shop - no.
• Backlight - is.
• Adjustment: only the speed.

pros

• robust housing;
• the weight;
• the presence of a pulse mode with its automatic switching;
• lighting the working area;
• network cable 3.9 m;
• carrying case included.

Minuses

• The lack of depth stop screwing and brake motor.
• Insufficient length of the power cord.
• Absence forced off the impulse mechanism.

Best inexpensive network screwdriver

Screwdriver, drill function Kolner KED 240 V for domestic use, equipped with a 240 W electric motor, whereby one of the cheapest machines with similar characteristics. Keyless chuck provides easy replacement of the working equipment, the diameter of which is in the range 0.8-10 mm. In addition to working with fastenings model allows to drill holes with a diameter of 6 mm. The torque is regulated by force pressing the start key is changed within 16 degrees. Monotonic operation is simplified by the presence of start blocking. Tool weighs only 1 kg and its pistol shape to support a second bottom arm eliminates fatigue during prolonged use.

this model is the most simple in functionality. There's no backlight, spindle lock function or firing mechanism, but with his work copes well without difficulty tightening the entire length of the screws even 90 mm in length.

Characteristics

• Engine: Power - 240 W, Power - 220 V.
• Torque (max.) - 12.5 Nm.
• Number of speeds - 1.
• Cartridge: keyless type a snap 0.8-10 mm.
• Hammer mechanism - no.
• Shop - no.
• Backlight - no.
• Adjustment: only the speed.

pros

• a flexible conductive network;
• reverse;
• Drill function;
• compactness and weight.

Minuses

• Odor resistant plastic. It erodes in about a week.
• The absence of the case.

Best Network screwdriver with illumination

Powerful professional model Makita FS2300 with an electric motor 570 W, produces a maximum torque of 25 Nm. High speed, convenience and accuracy provides ergonomics with rubber butt pad arm and recess at the upper part for abutment with one hand. This screwdriver weighs 1.6 kg, develops the maximum speed in the amount of 2.3 thousand. rev / min, and they lend themselves to regulation that allows the screw fasteners in tight material.

To fit a large number of screws is provided at one depth limiter depth, with low noise is achieved by having a special clutch. 1/4 HEX type cartridge for installation 6,4-6,87 - millimeter tooling magnetic bit holder. On top of the case is a clip, making it possible to fix the screwdriver on the belt, thus freeing both hands.

Characteristics

• Engine: power - 570 watts, power - 220 V.
• Torque (max.) - 25 Nm.
• Number of speeds - 1
• Cartridge: magnetic, HEH type.
• Hammer mechanism - no.
• Shop - no.
• Backlight - is.
• Adjustment: the rotational speed, the depth of screwing.

pros

• power and torque;
• total weight 1.6 kg;
• lighting;
• quiet operation;
• presence screwing depth adjustment fasteners.

Minuses

• Cost.
• Lack of carrying case included.

Best professional screwdriver Network

For a long part of the work with the fixture model Bosch GSR 6-45 TE + MA 55 Professional It fits perfectly. This professional tool by an electric motor 700 W, developing speed to 4.5 kb. rev / min. The main purpose - work on plasterboard, but the spindle speed and torque are balanced for many purposes. Release sleeve and depth gauge allows you to turn the screws with high precision. It comes with attachment, designed to work with screws of the same size as standard tape. The advantages accrue presence starter lock keys overload protection, magnetic bit holder.

Ergonomic pistol housing screwdriver with a rubber butt pad grip provides a comfortable hold with one hand tool. The nozzle also has its own handle, enabling precise positioning of the model, at the same time it is removed without the use of keys or screwdrivers. Buyers manufacturer offers a warranty for two years.

Characteristics

• Engine: Power - 701 W, the power - the network 220 V.
• Torque (max.) - 12 Nm.
• Number of speeds - 1.
• Cartridge - type HEX 6,35 mm.
• Hammer mechanism - no.
• Shop - belt-type.
• Backlight - no.

pros

• off nozzle for tapes.
• the weight;
• Lock start button;
• Screwing to fit aftermarket tape.

Minuses

• The lack of illumination.
• Feed spent half does not allow to hang the tool on belt.

Best powerful network screwdriver

Complete drill and screwdriver in one powerful package - it Elmos ESR913C. The model is based on the motor output 910 watts, thanks to which, and versatility is achieved. Availability is a torsion clutch 2 full speed, the keyless chuck 13 mm, depth of holes. Screwdriver to easily cope with hard wood, metal, plastic, mineral materials.

For convenience, an additional removable handle, controls the rotational speed and torque lock button accidental launch. The maximum rotation speed is 1700 r / min, and when its functional tool weighs just 2.2 kg, the addition is complete percussion mechanism 22100 beats / min.

Ease of use The model is not limited to successful design. There is no need to come back for spare bits in the event of a breakdown of working for them provided in the upper part of the body. In the center is a shift lever, and the reverse is located just above the start button.

Characteristics

• Engine: power - 910 watts, power - 220 V.
• Number of speeds - 2.
• Cartridge - keyless type, diameter - 13 mm.
• Hammer mechanism - ie, 22.1 thousand. beats / min.
• Shop - no.
• Backlight - no.
• Depth stop - there.
• Adjustment: torque, speed.

pros

• the presence of the impact mechanism, is able to completely replace the drill;
• power;
• build quality, service life, reliability;
• adequate price tag.

Minuses

• Short and hard power cord.

Best Network screwdriver for home

Good completion arsenal DIY tool will Makita FS4000Belonging to the category of professional models. This model is quite expensive, but it will cope with the everyday tasks of any complexity. A characteristic feature of the screwdriver - ergonomic design, an electronic control system speed, enduring engine developing 570 W at their fixed values ​​of torque - 16 Nm. In addition, the model received a reverse, and most importantly - the depth stop screwing setting is performed by turning the ring. It allows to easily perform a major overhaul, to engage in a full-fledged construction at their summer cottage.

The model has a standard cartridge type 1/4 HEX hexagonal bits for the size of 6.35 mm. Screwdriver weighs just 1.3 kg, which excludes fast hand fatigue, especially when screwing fasteners at a level above the head. The developers have thought good ventilation motor, leading to the possibility of long-term continuous operation without fear of overheating of the filling and the shell itself.

Characteristics

• Engine: power - 570 watts, power - net 220 V.
• Torque (max.) - 16 Nm.
• Number of speeds - 1.
• Cartridge - type HEX.
• Hammer mechanism - no.
• Shop - no.
• Backlight - no.
• Adjustment: the rotational speed, the depth of screwing.

pros

• power;
• the possibility of continuous operation without overheating;
• the weight.

Minuses

• Cost.

Screwdrivers due to its versatility is able to replace a drill and screwdriver. On the other hand, the tool should not be used to carry out the work of non-target, as it will lead to a rapid deterioration of its elements. It is important to remember that the main purpose of the screwdriver - screwing self-drilling screws.