Laying the tiles in the bathroom: surface preparation, options and stacking technology, price review

For wall and floor tiles in the bathroom are often used tile. Lay your hands this moisture-resistant and beautiful material may not all. You need to know the technology and some of the nuances. Offer to find out, how is laying tiles in the bathroom, so you can independently perform the cladding.

Options for laying tiles in the bathroom: a photo interesting design decisions

Manufacturers offer tiles of different sizes, shapes, colors, with a variety of drawings. It allows you to trim in the room any styleBy opting for a particular color scheme. Stacking material may be performed in two ways:

• work starts from the center. Two elements are centered, and the rest are attached to the sides. As a result, it manages to form beautiful pattern on a wall;
• masonry perform from the edge. This method is much easier to first, but the result is inferior in terms of presentable.

Offer see photo styling options tiles in the bathroomTo make it easier to imagine the end result.

Laying the tiles in the bathroom: preparing the room before work

Deciding to perform styling tiles in the bathroom with their hands, is first to prepare a room for painting and decorating. We offer to meet with the content of this phase and its performance characteristics.

Overlapping water supply, removal of furniture and dismantling plumbing

To avoid leaks, first reimplemented water pipes: Hot and cold water. You can then make furnitureAnd then dismantle plumber.

Dismantling of the old tiles

To remove the old tiles from the walls of the room you can use a putty knife. With it, it clings to the element edge and removed from the wall. Spatula can also be used for cleaning glue residues on the surface of the wall. Based on should not remain traces of adhesive. This nuance to remember all those who do not know how to put the tiles in the bathroom.

If the trowel with this task can not cope, it is possible to use a hammer or chisel with a hammer. Puncher has to work in the impingement mode. Dismantling should begin with the extreme elements.

Attention! Dismantling works always follow glasses.

Preliminary alignment of walls and floors

Dismantling the decorative covering, wall oshkurivaem and inspect carefully in the bathroom. If there are cracks and potholes are buried them Putty. Protrusions remove with a chisel or spatula embedded formed base damage.

Attention! For curing putties requires at least a day.

To control the horizontal position of the walls can be used stretched cord, verticality - plummet. Between the wall and the cord should be the same distance. Deviation of 12-15 mm can be corrected by the plaster. When a large curvature of the walls, you can use a sheet drywall. Laying tiles on the bathroom drywall will form an even coating for large swings horizontally.

How to lay tile in a bathroom - Step by step instructions

Those who have never performed finishing work will be interesting step by step instructions that allows the details to figure out how to put the tiles in the bathroom, and that this requires.

What do you need for laying tiles in the bathroom with their hands: prepare tools and materials

For finishing work is required:

• spatulas. It should prepare a normal gear, rubber;
• Tile, by which some of the tiles will be cut to size. In its absence, you can use Bulgarian;
• level;
• chisel;
• Capacity for the adhesive composition;
• measuring tool;
• ordinary hammer and firing pin with rubber;
• diamond core bit, designed for cutting holes in a tile;
• crosses and pegs made of plastic;
• mixer to prepare an adhesive composition. Alternatively, it may act as a drill with a special nozzle.

In addition to the fabric and glueIn sufficient quantity to be purchased Grout, water-resistant primer, Metal profile and screws for securing it.

Preparation of the solution for laying tiles in the bathroom

The procedure for the preparation of adhesive depends on its brand. Instructions can be found on the packaging. To prepare the solution is poured into a container in said manual water. The mixture is poured in small portions to avoid the appearance of lumps. To laying tile in the bathroom it was done qualitatively prepared adhesive should be in consistency like thick cream. It should not flow down the wall, and easy to expand with the spatula.

How to lay tile in the bathroom on the wall: a sequence of actions

At independent performance of works it is important to understand how to put tiles on the bathroom wall, so that each element is securely held on the ground. We offer to meet with an algorithm of actions, following which, it is possible to achieve the desired result.

Partitioning walls vertically and horizontally

From this stage it depends largely on the outcome. Immediately it should decide how to lay tile in the bathroom, depending on what kind of image will be generated as a result. Rectangular members can be stacked horizontally, vertically or in a combined way. Counting performed as follows.

Illustration	Description of the action
	Note the horizontal using a level. Make it should be just around the perimeter. Tags are applied in at least two places on each wall.
	To "recapture" the horizontal, use cord. We perform work together to provide sufficient yarn tension. Pulling colored cord, can be a second form on the wall of a perfect horizontal line at a height equal to the width of the tiles plus 5 mm.

Laying tiles

After performing layout can proceed directly to the wall. Let us consider in more detail how to put the tiles in the bathroom, depending on the desired result. Works are carried out in the following sequence.

Illustration	Description of the action
	Along the marked horizontal screws to fasten the metal profile. He will act as support for a number of latching. Laying start from the second row. The first number in the future will allow to neutralize the existing ceiling height deviations.
	Apply glue to the element. The adhesive composition should be distributed over the surface of a toothed spatula element, making movement in one direction.
	We put the product to the wall with glue and pressed. While the composition is not frozen, fragment align vertically and horizontally.
	Similarly, applying a second element. To ensure the mutual position of the neighboring use plastic crosses and stakes.

Trim the corners of the tiles

When laying tiles in the corner of the bathroom may need trimming element in size. This can be done as follows:

• We set the element face to him. Note the excess material;
• overturn it in a horizontal plane is applied to the installation place and causes the mark;
• connect the two points;
• cut off excess Tile.

Comment

Mikhail Starostin

Team leader repair and construction company "Home Premium"

Ask a Question

«When applying marking necessarily consider the gap between the adjacent elements. "

Drilling technology openings

can be used for forming the processing opening:

• crown with a diamond coating. Its size must exactly match the dimensions of the future holes;
• "Ballerina". Available universal tool to adjust the diameter of the formed hole. Inferior quality of the first formed hole;
• grinders.

How to lay tile on the bathroom floor: select a landmark

Getting laying floor coverings on, Should define the main point of reference, in which can be a:

• distal apparent angle. The traditional option is expected to begin laying the angle located diagonally door to the bathroom;
• threshold. It is important to know how to lay tile in the bathroom. With this landmark work starts from the corner adjacent to the front door;
• central notch. Used in larger bathrooms, where all the furniture and sanitary ware located along the walls, while the center remains free. Works begin from the point of intersection of the diagonals of the room. It is also the central point of intersection of the four products.

Grout tile joints

To give a proper view of the formed coating, a day after the laying of the tiles on the bathroom floor and walls executed grout tile joints. For this purpose, the surface of the tile removed traces of glue which could get in the coating during the work. Prepared a special blend or purchased ready-made structure. For its application is used a rubber spatula.

After half an hour after setting the composition of its excess is removed from the front. This can be done using a cloth or sponge moistened with warm water. On the finished coating must be white bloom.

How to put the tiles on the tile in the bathroom: important nuances

This variant is relevant when repairs, if:

• floor covering in perfect condition and does not have defects;
• the dismantling could cause the destruction of the wall;
• impossible to dismantle plumbing;
• reduced floor level.

To make it easier to understand all the nuances of the process, we offer watch video how to put the tiles on the tile in the bathroom.

Installing the bath takes place before or after laying tiles: a competent opinion

After reviewing the sequence of finishing works, the majority of people performing repairs with his own hands, begins to find out when you are installing bathBefore or after the installation of the tiles. Many believe that it is necessary to do it before. However, we recommend that you do the opposite.

If you violate stacking technology between the tub and tiles may form a large gap. Remove the gap in the future it will be difficult. That is why the bath should be installed immediately after the floor cladding, giving it the desired spatial position. In this case, it will be possible not only to avoid the appearance of a gap near the wall, but you arrange joint.

If you still have doubts about the feasibility of using tiles for cladding bathroomWe offer to get acquainted with the opinion of those who have already bought it.

Review of ceramic tiles Cersanit

Feedback on tile Golden Tile Rela

How much does a tile laying in the bathroom - a review of the price per m²

If you are unable to deal with the way his own hands put the tiles in the bathroom, we offer to seek help from professionals. They are familiar with the technological features and nuances of the work. As a rule, the price of tile in the bathroom indicated per m². It depends on the size of one element, the content of the work and the type of foundation. Please find the average cost of laying tiles in the bathroom.

If you, too, in the bathroom tiles on the walls, share in the comments, what material and why their preference, and how does styling.