Stylish appearance and high performance make the cleaning of stainless steel for the kitchen in demand in the market. Manufacturers offer a wide range of products, among which we can always choose the right option. We offer to meet with the existing species and their distinctive features.
Large assortment will pick up suitable option for any interior
Read article
1 Advantages and disadvantages of sinks to the kitchen with stainless steel
2 Sinks of stainless steel for the kitchen: the main types of
2.1 In the method of manufacturing
2.1.1 weld cleaning
2.1.2 stamped wash
2.2 According to the type of installation
2.2.1 overhead sinks
2.2.2 Mortise and integrated sink
2.3 Shape and depth of the bowl
2.4 According to the number of cups and the presence of the wings
3 Standard sizes mortise and overhead sinks for the kitchen made of stainless steel
4 Grades of stainless steel used for the manufacture of shells
5 Distinctions polished, matt and textured surface for kitchen sinks Stainless
6 Ranking of the best manufacturers of sinks for the kitchen made of stainless steel
7 How to choose a sink made of stainless steel for the kitchen - the recommendations of our editorial
8 How much are the straight and corner sink kitchen stainless steel - price review
9 Consumer reviews on stainless steel sinks for the kitchen
Advantages and disadvantages of sinks to the kitchen with stainless steel
Kitchen-sink Stainless steady demand for the following reasons:
long service life;
a large assortment. Sinks of stainless steel capable of harmoniously fit in interior any apartment;
ease of maintenance and installation;
high hygienic properties. Stainless steel is not conducive to the formation of harmful microorganisms;
resistance to aggressive substances, external mechanical impact, high temperature;
recyclability.
Caring for a simple sink
Attention! Frosted articles not only have a presentable appearance, but also have a higher resistance to external impact.
Among the shortcomings should be noted:
systematic appearance of lime, which is quite difficult to fight;
excessive noise incident on the surface of the water, especially if used steel sheet of small thickness to shell manufacture. Some manufacturers offer low-noise model in which to absorb excessive noise on the backside of the attached special linings of plastic or rubber;
bias mixerInstalled in a product of small thickness. At high head may be a shell material deformation at the point of contact;
electrical conductivity. To prevent accidental electrical shock in the kitchen sink is desirable ground.
The falling water creates a lot of noise
Sinks of stainless steel for the kitchen: the main types of
Manufacturers offer a wide range of stainless steel sinks. Select the appropriate option for the kitchen can be difficult. We offer to meet with the existing species and their distinctive features.
Product Configuration can be very diverse
In the method of manufacturing
Shells are manufactured from stainless steel by welding or stamping sheet steel. The manufacturing method has a significant influence on the performance and price of products offered. We offer to understand the distinctive features of each type.
The manufacturing method may differ
weld cleaning
During manufacture of such products bowl and base are interconnected. Formed welded seam is a weak point in the finished design. If there are hidden defects at the junction of the shell can start to leak. After polishing formed seams practically invisible. Technical sink stainless steel mounted on the catering, produced by welding.
Welds necessarily polished
The advantages of welded products should include:
the possibility of modeling products of any shape;
permissibility use for the manufacture of sinks sheets of greater thickness, which is favorable effect on the strength, reliability and the level of generated noise;
a large assortment.
Attention! Price round stainless steel sink kitchen will be higher than similar models produced by stamping.
1 of 6
stamped wash
For the manufacture of molded articles using a single sheet of stainless steel which undergoes plastic deformation on special dies. If you violate the production technology of the thickness of the finished product may vary.
Relatively recently, the depth of such products does not exceed 15 cm. Currently, thanks to the introduction of innovations, some manufacturers began to offer deeper shell.
1 of 6
According to the type of installation
Installation of the product can be carried out in different ways. It all depends on the design features of a particular model. We offer to get acquainted with the features of invoices and mortise models.
Installation can be done in different ways
overhead sinks
The best option for small kitchen unitsConsisting of separate table and lockers. The shell is installed in a hole formed in the cabinet. Installation can be made with your own hands. Washers have a relatively small depth.
Attention! Moisture must not fall between the sink and furniture, it can cause damage to the latter.
1 of 5
Mortise and integrated sink
Mortice model are mounted in specially prepared holes flush with the countertop surface. These deep cleaning of stainless steel form a sealed connection with the kitchen furniture set. Installation requires some skills and the availability of special tools.
Integrated models are installed inside headset. The bowl is below countertops. They have a unique design, but cost more than other types.
Integrated models - stylish solution
Shape and depth of the bowl
product shape can be very diverse: round, rectangular, square, angular and polygonal. Configuration choices depend entirely on personal preference and the hosts kitchen design.
The form can be very diverse
The minimum depth of the bowl is 15 cm, but more popular overhead wash Stainless steel kitchen 800 × 600 mm having a depth of 18-20 cm. This is enough to prevent water splashed, and the tank could fit a lot of dishes.
Attention! For small kitchen sink ideal waybill stainless steel 50 × 60 cm.
The greater the depth, the user-friendly operation
According to the number of cups and the presence of the wings
Most models have one cup. However, a more preferable pattern with two bowls. One can be used for washing dishes, the other - for the fruit. Siphon one set for two containers.
Two tanks are more preferred
Attention! Manufacturers also offer models with three bowls. To accommodate them need a lot of space.
Some models are equipped with side wings (one or two) that will protect the tabletop from moisture. Choosing a suitable option among the welded structures, ensure that all elements are made of stainless steel.
Wings will protect from moisture headset
Standard sizes mortise and overhead sinks for the kitchen made of stainless steel
Dimensions of stainless steel sinks are set GOST 50851. It contains all the relevant information. Length overhead models may be 500 - 1200 mm and a width of 600 mm.
Dimensions mortise sinks for the kitchen made of stainless steel are slightly different. The length may be 450 - 1150 mm and a width of 500 - 520 mm.
Product dimensions are standardized
Grades of stainless steel used for the manufacture of shells
Performance characteristics Shell is largely dependent on the composition of the stainless steel used in the manufacture thereof. The type and amount of alloying elements influence the ductility, toughness and corrosion resistance of the material. Most often the choice is made in favor of:
AISI 304. Possible marking 08H18N10 or 304. 18% chromium and 10% nickel alloy confer high performance. Buy inexpensive cleaning of a stainless steel for the kitchen will not work;
AISI 204 or 204. This material is treated better, thus reducing the cost of finished products. Due to the lower content of nickel and chromium finished products have lower strength characteristics and corrosion resistance;
AISI 202 (12H17G9AN4). Opting for such unscrupulous manufacturers make stainless steel. On the surface of the shell may eventually appear corroded, may change color.
Tip! Attach to purchase a product magnet to make sure as material. The magnet should be free to slide on the surface.
alloy quality requires mandatory testing
Distinctions polished, matt and textured surface for kitchen sinks Stainless
The shell can be:
matt. The most common, but not too showy option. No special requirements for care. The product looks original and naturally interior of the kitchen;
glossy. Polished surface looks like a mirror. It is ideal for kitchen in high-tech style;
invoice. It has a moth-eye pattern. For such a surface requires constant care to prevent the appearance of drops traces.
Comment
Irina Rosenstein
Designer studio "Cozy Home"
Ask a Question
«Products with an embossed matte surface and can fit into any interior. "
Matt's most popular products
Ranking of the best manufacturers of sinks for the kitchen made of stainless steel
Quality products are offered by many manufacturers. Choosing the best sink stainless steel kitchen, check with the following ratings:
EMAP
10/10
;
Franke
9/10
;
Fand
9/10
;
Flex
8/10
;
Donau
8/10
;
Ledeme
8/10
;
Omega
8/10
.
Attention! German stainless steel sink for the kitchen is traditionally characterized by high quality.
EMAP - consistently high quality
How to choose a sink made of stainless steel for the kitchen - the recommendations of our editorial
To purchase the right product, you should:
choose the installation site to determine the configuration of the future product;
refer to the proposed range. It is better to select a product from the alloy with the highest content of chromium and nickel;
choose washing thickest, as it can last for much longer;
to give preference to products known manufacturer.
We offer watch a video, which tells how to choose a sink made of stainless steel for the kitchen:
How much are the straight and corner sink kitchen stainless steel - price review
If you decide to buy a double sink made of stainless steel for the kitchen, we suggest to familiarize with the cost of such products:
Model
Characteristics
The average cost (in September 2018), rub.
Blanco Tipo 6S Basic
Flush. 95 × 50 cm. The depth of the bowl of 16 cm.
5920
Blanco Classic 8
Flush. 78 × 51 cm. bowl depth of 17.5 cm.
31120
FRANKE ETX 620-50
Flush. 78 × 50 cm. bowl depth of 15 cm.
3797
IDDIS Strit STR78P2i77
Flush. 78 × 48 cm. The depth of the bowl of 18 cm.
6440
We offer to meet at the corner sink prices for food stainless steel:
Model
Characteristics
The average cost (in September 2018), rub.
TEKA Angular 2B
Flush. 83 to 83 cm. bowl depth of 18.7 cm. Two bowls.
16500
ElleciRiverCorner
Flush. 83 to 83 cm. The depth of the bowl of 18 cm. Two bowls.
12500
Smeg SP2A
Flush. 83 to 83 cm. The depth of the bowl of 21 cm. Two bowls.
19420
FORMA-XL Forma 8383-A
Flush. 83 to 83 cm. The depth of the bowl of 18 cm. Two bowls.
8350
Consumer reviews on stainless steel sinks for the kitchen
Before you give preference to a particular model, check out the reviews of real customers who have already installed the sink made of stainless steel in their kitchens.
Feedback on sink Franke:
More on Otzovik: http://otzovik.com/review_1761174.html
Franke sink
Feedback on wash Fand:
More on Otzovik: https://otzovik.com/review_1125738.html
Washing Fand
Share in the comments, what a sink installed in your home, and why do you prefer this particular model.
