If the shell is not very deep, it can be installed by removing the top cover of the washing machine
CONTENT
- 1 How to choose a washing machine and wash over her in the bathroom and in the kitchen
- 2 How to choose a sink on the washing machine
- 3 Leading manufacturers of shell-lily
- 4 Popular models
- 5 Advantages and disadvantages of the sink installation of a washing machine
- 6 What should be the washing machine, make it convenient to use the sink
- 7 Installation of sink water lilies
How to choose a washing machine and wash over her in the bathroom and in the kitchen
As for the bathroom, there is the installation of compact bathrooms perform for reasons of convenience. For example, if you put the sink in the corner, then "Stiralka" front-loading It will look ridiculous in that position. Actual placement - is the arrival of the pipeline route from the entrance. If houses are built under the key, then it is better not to change the location of the pipes. Traditionally, in many apartments installation of such equipment do complex between the bathroom and the toilet, to use a common sewer system.
This type of sink can be installed on any appliances
According to experts, use this kit as a sink and a washing machine, the kitchen is inappropriate. This is inconvenient, because the dishwashing need a deeper cleaning, and from flat water to be sprayed and can hurt household appliances.
When choosing a location it is recommended to take into account the parameters of the most sink and washing machine. Ideally, that in the supposed area housed a sink, which will be 2-3 cm wider home appliances from all sides. To properly install the kit, it is necessary to evaluate the possibility of further movement in the room.
Be sure to mark up in the zone of the future installation, and then acquire the appropriate equipment.
If at the time of installation you have nowhere to connect the overflow, use the sink you can, you will need to monitor the water level in the sink
How to choose a sink on the washing machine
There are lots of individual things you should consider when choosing a vanity design above the washing machine. We will study all the detail in this section.
In material manufacturing
If you purchase a model sink for the bathroom (which is often done), you should pay attention to plastic, porcelain and marble products. For example, plastic sink is easy to mount, and the porcelain would be resistant to chemicals (detergents).
Qualitative models have more additional towel racks
Cast marble - it is more expensive construction. It requires careful installation, however, it looks elegant and suitable for any interior room. On sale you can find models of special concrete composition, but they are not well established in the operation, as they are considered impractical and too heavy.
Owner may have caught the shells from acrylic and glass. They are considered to be more popular, and as made of artificial stone - are several times cheaper than natural structures.
In lilies-shells included is a stopper for holding water
In size, shape and presence of the wing
Dimensions must match the sink washing machine casing. For example, for narrow washing machines with parameters suitable shell 50 × 60 cm. For models with a body width of 50 cm, the best option Washbasin size 60 × 60 cm.
For bathrooms in apartments most often used uzkogabaritnye models of washing machines, so the design washbasins with sides of 50 × 60 cm is considered to be the most popular among the rest.
The tiny sink can be installed with siphon valves
shell form in the bathroom is not the last value. Since this parameter is important to design the room in harmony with his attributes. In recent years, the apartment owners refuse to buy the traditional rectangular washbasins model. They are not very compact and practical. Often, the presence of these angles is the cause of injury in children.
Where the great demand for the construction of the oval type. They have a streamlined shape, they are often equipped with additional wings with niches in the form of shelves or drawers. Variants with tabletops and Mortise sink will be very convenient for small space bathroom, where to install additional headsets can only be to the detriment of the useful space.
Not all sinks are installed close to home appliances
In-stock mixer hole
New models of shells, which are installed under the washing machine, do not have holes for the mixer, it is quite inconvenient at first glance. However, many owners are very quickly become accustomed to the nuances. If in the sink hole is provided for the crane, they can be arranged as in a corner, and in the middle of the structure. In such cases, it is important to consider the setting of the mixer so that the tubes enough to cold and hot line with a margin.
On discharge location, siphon and overflow
Installation with additional wings allow more efficient use of wash basin
safety of the structure lies in the correct location of the drain. Distinguished only two ways: the side and above the machine. The first option is the most optimal, since the risk of moisture penetration in the art housing decreases. When draining device is located above the appliances, there is a possibility of short circuit, because of what the operation panel can be damaged. Mounting a flat horizontal siphon under the sink, it is recommended to use a high-quality sealant.
Overflow is typically located within the mixing zone or below it. Such designs are very comfortable, so to avoid a flood in the bathroom easily.
Construction of a washing machine which can be installed near the outlet in case the reliability and integrity of the compounds
GOOD TO KNOW! (Click to see)
In a vertical type of siphon water does not stagnate and drains more easily. Accordingly, the better to establish such a structure, and for the convenience of its mount on the side of "stiralki" or on the wall.
Leading manufacturers of shell-lily
Sink-lily - is an easy thing for the bathroom, which is already small space. If you select the model of an unknown manufacturer, most likely, it will be of poor quality sanitary ware. Editorial Tehno.guru prepared a list of the best brands that have proven their popularity high quality.
- Santek;
- Sanfir;
- Tehnolit;
- Marco;
- Santurash;
- Ideal;
- Light.
In the ranking mainly involved foreign brands, but the products of Russian producers also received the right to buy. For more information on these models will learn in the next section.
Popular models
As a rule, apartment buildings space in the bathroom is very small, so many owners give preference to shells, water lilies. What kind of model is better to choose, see our review.
Sink 53.5 cm Waterlily CD
Installation with a shallow bottom is not suitable for washing dishes, rather it just for the morning water treatment
Qualitative model with built-in mixer. The apparatus has a non-standard shape, made of porcelain. The design is fully completed, so is ideal for use on household appliances.
| Dimensions, cm | Placing mixer | The diameter of the drain hole, cm | kit | additional information |
| 53,50 × 56h14 | left | 45 | Mixer, sink, overflowing. | no |
Sink 60.5 cm Waterlily Elegants
Instead of draining miniature shells commonly used valves
Universal installation on the washing machine, made of earthenware. The model successfully attached and serves for a long time. Not demanding of care, is resistant to the impact of detergents.
| Dimensions, cm | Hole for the overflow | Tap hole | Equipment | The form |
| 60,50×60,50×14 | there is | no | Siphon, drain, overflow. | rectangular |
Sink 63.5 cm Waterlily Deal
Washbasins on the washing machine can be not only rectangular, but also have an unusual shape
Convenient sink, installed above the washing machine. The product is made of porcelain, it has a non-standard shape. In addition to the main set guest soap dish. Installation is suitable for any style of bathroom.
| Dimensions, cm | Mixer hole | Diameter drain, mm | kit | Mass, kg |
| 63,50 × 57h14 | 2 | 45 | Siphon, drain, overflow. | 19 |
Sink 60.5 cm Victoria waterlily
The containment flaps are often installed on a chain, so they are convenient to use
Construction of irregular shape, made of porcelain. Installation on the washing machine has a complete package, which includes a handy soap dish. The shell may be white or cream color.
| Dimensions, cm | Tap hole | Hole for the overflow | Equipment | Installing drain |
| 60,50×59,50×14 | 1 | there is | Drain, siphon, overflow. | a mixer |
Sink 80 cm lily Long
Wings on the shells can be both single and both sides. It depends on the free space to the wall
User-friendly design, which can be placed various accessories for hygiene. The unit has not only the capacity for washing, but also additional wing, which plays the role of the stand. We rounded corners design.
| Dimensions, cm | Hole for the overflow | Equipment | Tap hole | Material |
| 80×50 | there is | Siphon, heated towel rail. | there is | faience |
Advantages and disadvantages of the sink installation of a washing machine
When a plan decided, it is important to provide some points that could be decisive in setting the washroom design. Therefore, we will talk about the pros and cons of the shell with the installation method of the washing machine. First of all let's talk about the merits of such an arrangement:
- flat shell does not take up much space and is suitable for installation on any appliances;
- Proper placement of the design adds accent the overall design of the room;
- thanks to the compact unit connected two attributes at once, the main thing to get all the necessary equipment.
It's time to talk about the shortcomings, so they are not surprised by the shell holder in the course of its operation:
- We have to perform snapping washbasin room sizes and related household appliances;
- the liquid from the tank does not go away all, so it is often necessary to remove yourself so that no dampness and mold;
- will not be able to make a quick installation, since due to the shortage of space to perform all the actions necessary through small cracks and openings;
- in the case of shell replacement, use simple it would be inappropriate because it does not fit in size.
Therefore, be sure to carefully examine all pros and cons before buying coincident design and installation. If you have minor cons, then safely be engaged in the installation.
Set above the sink top with machine control panel is impractical. There is a risk to splash it with water
What should be the washing machine, make it convenient to use the sink
For the rational allocation of sinks and washing machine in the bathroom need to understand the dimensions correctly. If the room is normal, choose the model of traditional electrical sizes. Also pay attention to the following components:
- optimum width washing machine for 45 cm of such conditions. If you select a larger machine, then installation will be uncomfortable, and the room aesthetics somewhat disturbed;
- that is convenient to use the sink, it is necessary that the height of home appliances do not exceed 60-70 cm. That's enough to wash basin was able to enjoy and adults and schoolchildren;
- with such a way of installation is recommended to forget about installing machines with vertical load of laundry. Otherwise it is necessary to form a special pull-out a niche for use of a washing machine;
By the flat shell fit models of washing machines built-in type. In any case, you must specify the parameters of this model.
For many designs can be difficult to find faucets and other accessories in the case of replacement
Installation of sink water lilies
Installation of this design over the washing machine requires a preliminary study of phased working method. Be sure to have on hand a complete list of tools that will help accurately perform the installation.
The scheme will help in the installation design. Even if it is made by hand, all the dimensions must be included in it
Preparatory work
At the moment, the employee must perform a few simple steps:
- Dismantling the old sink, if present, remove the wrong trap. Set fixture, which comes to the "lily".
- Measure the height of the washing machine. On the basis of measurements to determine the height of the sink unit.
- Checking the gap between the shell and "stiralka".
Installation-lilies sink
When finished rough work, go directly to the installation of the sink. It is attached to the wall in the first place. We operate strictly according to the algorithm:
- For marking drill holes for fasteners and securely insert them into the wall. Next, install the brackets that are supplied to the sink.
- Set screws are tightened to lock, carefully centering sink to withstand angle for withdrawal of water.
- Install the siphon. In this case, be sure to use rubber gaskets and sealants. Carefully stretch the connections. To check for leaks is required to pass water.
- Put the washing machine under the sink to its final installation is level. The main condition to siphon pipes and other components are not in contact with the appliance housing.
Siphon is better to install the vertical and fasten it to the wall without touching the washing machine
Recommended as a finishing touch to watch this video in which you will learn all the secrets of the sink installation of appliances.
Dear users, if you are ambiguities installation or have an opinion about using shells above the washing machine, please contact us in the comments, we will be happy to answer all questions you are interested in.
