The best cordless screwdriver rating 2019 low-cost models, the reviews

How to choose a battery screwdriver for home - the main technical parameters

By choosing a worthy model screwdriver must be approached as carefully as possible. This tool at the right time and in the right place do a good job. Disassemble / assemble furniture, unscrew the plug, screw the plinth - only a small part of the work, which can help screwdriver.

When working with plasterboard better assistant than a screwdriver, do not find.

And if the room is under renovation, is no screwdriver is difficult to imagine how complicated repair and increase its life. Basic parameters to which you should pay attention when buying a few:

• power. It characterizes the performance of the tool as a whole. For domestic use typically lasts about 450-700 watts;
• torque. Characteristic shows how force can develop a device for tightening or unscrewing the bolts and screws. The bigger, the better. However, the price of more efficient models will be higher;
• Reversing presence. Reverse - a mechanism to allow the cartridge to rotate in the opposite direction. Used for unscrewing screws and bolts. Virtually all modern screwdrivers equipped with a thrust reverser;
• rotational speed. The spread of this parameter in the screwdriver is pretty big. May occur with values ​​from the model 500 to 1400 rev / min. Here you need to choose depends on the type of work. In fact, even high-speed models of screwdrivers equipped with the mechanism lowering the number of revolutions;
• overall ergonomics. Before you buy to estimate the weight better, as he lay in his hand, and its design. These parameters are particularly important for those who plan to work with the tool continuously, especially at the height;
• the presence of the striking mechanism. This ability screwdriver along with the rotation of the cartridge causes vary progressively. This model is able to replace a full punch in certain types of work, such as drilling holes for dowels, nails, small diameter;
• battery type. Quite an important parameter, which we will look separately below in the article.

NOTE!(Click to see)

The main types of screwdrivers

Screwdriver is a hand tool class can be divided into two major groups: the network and storage. Each of them is aimed at solving its narrow range of applications. Although where it is possible to replace one kind to another.

network screwdrivers

Network screwdrivers - a device operating from the mains. The work does not need to periodically interrupt the operation of the battery change, in addition, such models are often more power. there is also a kind of work in which to use the cordless screwdriver simply impractical. This could include the drilling of holes in viscous materials that require long-term exposure. However, the network batteries require electricity and of extensions to the workplace. Another important point can be considered associated with this inconvenience - a place of work is limited, and quickly move to a new point is difficult.

Cordless Screwdrivers

The greatest advantage of the cordless screwdriver - autonomy. For their work is not required perenosok, extension cords and power supply networks. Need a stationary base to recharge the batteries. Their main task - to work in tight spaces and in those cases when it is necessary to pass a large area in a short time. As EXAMPLE- stacking metal tiles. The bulk of the work here takes preparation, sheet cutting and styling. On tightening the screws it takes much less time. In addition, the tiles cover a large area at once, and the use of autonomous screwdriver will help to increase the overall performance of the work.

screwdriver is indispensable in living conditions for the execution of single works - unscrew or screw the element of the interior, to disassemble the appliance, screw the screw into the wall. It will be much faster and more convenient than using a wired drill.

Types of batteries - which is better for battery screwdriver, pluses and minuses

We should highlight such an important characteristic as the battery type. There are three types:

• Ni-Cd - nickel-cadmium;
• Ni-MH - a nickel-metal hydride;
• Li-Ion - Li-ion.

Nickel Cadmium are the most Canonicity Screwdriver. Their technology is known for a long time, so this is the type of modified and inexpensive. Batteries can work without charge loss at temperatures up to -20 ° C. Also from the pros can be more resources, that is, nickel-cadmium batteries last longer when used correctly. The most serious of the downsides - the memory effect. That is, charge the battery, do not fully discharged reduces its share. Therefore, to work with this type of battery is necessary so: fully discharged, fully loaded. Nickel-metal hydride batteries have a relatively high capacity Ni-Cd, have little or no memory effect, can operate at low temperatures. Disadvantage is a higher price and lower overall life of the battery.

Lithium-ion batteries for screwdrivers have no memory effect, that is, you can be charged and discharged at any time. This kind of gradually replacing all the others. The batteries have a high capacity and low weight. Thus for lithium batteries screwdrivers bad feeling at low temperatures and are more expensive than other types.

By the way, the information about the type of batteries is important not only for the screwdrivers, but also to other types of wireless electronics.

ATTENTION!(Click to see)

The leading companies in the production of screwdrivers

For a long time among screwdrivers dominate virtually the same brands. Here is a small list of the most famous names:

• Bosch. The company deals not only with production of screwdrivers, but also other construction and household appliances. Usually building tool divides the company into two types: the professional and the consumer. Distinguish them easily: the first is painted blue, the second - in green. Accordingly, the characteristics of both types are different;
• Makita. The company has long established itself as a manufacturer of reliable and powerful screwdrivers. Excellent ergonomics, persistent and long-lasting battery life of devices;
• Hitachi. Less common in the professional as well as in the domestic sphere. Although the tool quality level. However, it is worth noting that across the assembly from China, the characteristics of which are a bit worse;
• DeWalt. Many believe that it is a German brand. In fact, a US company. Accordingly, the name is read according to the rules of the English language - "DeWalt". It has its roots as much in 1922. Excellent professional equipment with the appropriate quality and price;
• Interskol. Domestic brand. Low price and high reliability. The build quality is not always pleasing to the eye, however, for domestic use screwdrivers Interskol - ideal solution;
• Hilti. This professional tool class. It characterized by high quality and high price. The use of household purposes from time to time is inappropriate.

Rating inexpensive cordless screwdriver 2019

Quality meets price - according to these criteria, we selected a few manufacturers and brands to help you choose a good screwdriver.

Bort BAB-12-P

Quite a simple model of a little-known German company Bort. However, the German is only a name, as the products themselves are manufactured in China. But for the rare work at home - a good budget solution. You can buy it for about 1500 rubles. However, this money will be present in the kit is only one battery.

From the basic characteristics include the number of revolutions - 600 per minute, the weakest torque - 28 Nm, engine brake, and multiple reverse rotation frequencies. As used type of rechargeable battery - Ni-Cd. The capacity is sufficient for domestic needs - 1.3 Ah. Voltage - 12 V.

Bort BAB-12-P

Interskol DA-12ER-01

12-volt representative of the brand. High number of revolutions - 1400 per minute. There are two speed mode - the main and lower. The second helps to tighten the screws in the types of viscous materials such as wet wood. Also, this mode can be used for drilling with the aim to protect the drill from overheating.

Of particular functionality can distinguish reverse and electronic overload protection. Additionally, there is a point lights and lock the power button. battery capacity - 1.5 Ah, that is a good indicator for household tools. Voltage - 12 V, and the type of battery - Li-Ion. When choosing it is worth considering that the battery supplied one.

Interskol DA-12ER-01

Bosch PSR 1080 LI 1,3 Ah Case

This screwdriver is suitable for smaller types of work - to disassemble / assemble a household appliance, furniture and adjusting screw. Accordingly, the characteristics are less productive. The maximum number of revolutions per minute - 550. Maximum torque - 17 Nm. Engine braking is present, and a bit-saving impaled screw from damage.

The battery uses a lithium-ion battery capacity of 1.3 Ah. At an operating voltage of 10.8 V it should last long. Of particular nuances can note the backlight, locking the power button and the case supplied. The battery in the standard configuration of one is present.

Bosch PSR 1080 LI 1,3 Ah Case

makita HP331DZ

Cordless screwdriver Makita HP331DZ has a fairly high performance, which allows to use it not only for domestic purposes but also for some cases of occupational. You should start with the fact that this tool can perform drilling with slotting. The maximum number of revolutions per minute - 1700. By this speed, you may have to get used to at first. Torque of 30 Nm, which is a leader in this ranking. instrument voltage is 10.8 V. Powered screwdriver on the battery, which is included at all. It will have to buy separately.

makita HP331DZ

Kolner KCD 12M

A very simple and inexpensive screwdriver with low productivity rates. The number of revolutions is only 550. Torque also unsaturated - 14 Nm. The type of battery used for power supply, - Ni-Cd, with a capacity of 1 Ah and a voltage of 12 V.

Kolner KCD 12M

Cordless Screwdriver KRÜGER KD-18Li

Drill German brand Kruger demonstrates excellent technical characteristics. The capacity of the lithium ion battery is 4000 mAh, which is considered very high for this instrument. KRÜGER KD-18Li It operates in drill mode and a pin, and with its help operate screwing / unscrewing the fasteners. The number of revolutions is high - 1500 per minute.

KRÜGER KD-18Li

Complete with a cordless screwdriver Kruger Charging, which charges the device in just 1 hour. Provided work light which allows you to use the instrument in locations with poor lighting. reverse function increases the safety of the product. If necessary, get stuck drill will be easy. The tool is supplied in a convenient carrying case.

The professional models differ from household

Professional tool focused on performance of large volumes of work and often not in the best of weather and environmental conditions. Therefore, this type of equipment manufacturers are trying to be equipped with more powerful engines, hardy units and buildings as well as improved ergonomics.

In this regard, any professional tool will be in the higher price range than the household. What a screwdriver to choose for the house? It all depends on the budget. If you are willing to spend a large sum, it can be viewed in the direction of professional models. However, it is worth remembering that the tool will be used rarely, and large investments are just lying in the pantry.

Rating of professional cordless screwdriver - which one is better

What characteristics should have a professional screwdriver? Firstly, - power and low supply speed. Secondly, it should be convenient for continuous operation. Third, the batteries should last for a long time. More desirable to have a few extra options - case, a pair of batteries, light and other extra "buns". Let's see what offers us the market. The relevance of the rankings cordless drills - 2019.

makita DHP481RTE

Very interesting version of the professional tool. In addition to the rotation of the operation, there is a hammering function with the stated number of beats per minute - 31500. Rotational speed too at a decent level - 2100 rpm. Maximum torque is 115 Nm. To supply with a rechargeable Lithium-ion battery capacity of 5 Ah and a voltage of 18 V. Interestingly, the charger can charge the battery in less than an hour.

makita DHP481RTE

dewalt DCD780M2

This model is able to develop the speed to 2000 rev / min. Torque is 60 Nm. If necessary, you can reduce the speed of rotation, moving the switch to the reduced mode. The battery device has a lithium-ion capacity of 4 Ah. The operating voltage is 18 V.

dewalt DCD780M2

hitachi DS14DSAL

Hitachi model represents the average among all the rating. Maximum number of revolutions does not exceed 1500. Torque - 45 Nm. Of the additional options you can select an electronic speed control, backlight and lock the power button. The battery included is a Li-Ion 14.4 V.

hitachi DS14DSAL

Metabo BS 18 LTX Impuls 2013 Ah 4

This screwdriver is strikingly similar design with some models of Bosch. But in this case it has good characteristics. Maximum speed - 1700 rev / min. Torque is more than enough - 110 Nm. Capacious battery, 4 Ah, Type - Li-ion. Operating voltage -18 V.

hitachi DS14DSAL

Bosch GSR 18 V-EC 2016 5 Ah

Professional model of known brand with improved characteristics. The number of revolutions - 1700, Torque - 60 Nm. As the name implies, the battery has a capacity of 5 Ah, is formed on a lithium-ion technology and produces 18 V. It can charge less than an hour from the original charger. Included is a second battery and a handy carrying case.

Bosch GSR 18 V-EC 2016 5 AchL

Rating cordless screwdriver for Reliability

Reliability and durability screwdriver - a guarantee of its stable operation for a long time. It's worth noting that the more reliable the tool, the more economical is its application over time. Let's look at a few models that can be considered the most hardy.

Bosch GSR 1440 Li

Excellent and inexpensive representative of a class of professional tools. It has two speed modes. At a high rotational speed can reach up to 1400 rev / min. The torque is approximately 30 Nm. Battery screwdriver Bosch GSR 1440 Li is not so capacious - just 1.5 Ah. However, included is a second battery replaced. The voltage is 14.4 V.

hitachi DS18DFL

Average, but hardy model screwdriver. The rotational speed of only 1200 rev / min at a torque of 41 Nm. Two battery capacity of 1.5 Ah and a voltage of 18 V allow the work is not interrupted for a long time.

dewalt DCD790D2

In this model, applied a special brushless motor mechanism. This ensures a longer operation of the device on battery power and durability in general. As for the technical parameters, they should be enough for most tasks, both large facilities and in the home. The number of revolutions per minute equal to 2000 at a torque of 70 Nm. the battery has a capacity of 2 Ah, the voltage - 18 V Technology - Lithium Ion. The set has a second battery.

How much is a good screwdriver: a comparative table

We collected all these models into one table for comparison. Probably because you will be more convenient to choose the most appropriate tool.

If you are already experienced with the purchase of tools, you can share your experiences in the comments with others. Perhaps someone it will help to understand what is best to buy a screwdriver for home or professional use.