Ranking of the best tips for plastic pipes in 2019

Today, almost everywhere there is the process of replacing metal pipes PVC pipes. The advantages of this material are obvious: reasonable price and ease of assembly of the pipeline. Plastic is not only easier to cut metal, but also welded in just a half a minute. This will help in soldering for plastic pipes. Soldering iron heated pipe ends and quickly joined by means of the fitting. Soldering help make almost any pipeline schemes: straight, curved, branched. Best tips for plastic pipes will not only require a professional plumber, but also a handyman. Now we'll show you how and what to choose a soldering iron, and at the same time to submit its independent Top 6 best tips for plastic pipes.

How to choose the best tips for plastic pipes

The novice master can stand the problem of choosing a soldering iron to PVC pipes. In today's market it offers a great number of models of different designs, versions with different technical characteristics.

The most common soldering irons, ironing. The working part in the form of ironing glows installed nozzles on both sides. On one nozzle part is mounted outside the pipe, the second - the inner part of the fitting. After heating the two elements of the joint. Another kind of soldering iron has a cylinder as a heating element. It is on him to put on the nozzle. matrix on such a device can be attached in any position in the cylinder end or at its middle. Since the tool can be adjusted to work on difficult areas: close to the wall, with difficult access and so on.

On what parameters need to choose the best tool:

1. View of the soldering iron. There are 2 large groups of soldering: professional and consumer. They differ in design and, of course, the price. The nozzles are screwed into the professional models from two to three. Household tools are more compact.
2. Power. Power - the main characteristic of the selection. Models up to 1000W have a single heating element, are tools to 2000W 2 heating element. From the number of heaters, the heating rate depends. 2 PETN more suitable for professional work, where you need to collect a large extent of the pipeline quickly. For domestic purposes more convenient model to 1000W, as they consume less energy and are more affordable.
3. The heating temperature. For welding PVC enough temperature 260-300 ° C. Very convenient to the presence of temperature control function. Then turn to weld different materials. For example, for polyethylene is 220 degrees is sufficient for polypropylene need to 260 degrees.
4. soldering diameter. An important characteristic, which determines the diameter of which pipes can be welded. soldering diameter depends on the number and diameter of the nozzles supplied with the instrument. The more nozzles (though they can be purchased separately), the wider range of applications. 6 matrices with diameters of 20mm, 25mm, 32mm, 40mm, 50mm, 63mm will work with podvodkami water faucets, water pipes with apartment, plums, conduits in the country. In the professional field may be necessary to mount large diameter pipes may be required so the nozzle to 90 - 110mm.

Top 6 best tips for plastic pipes

Let's look at the best models of irons in different areas of use.

Top soldering irons for the home

Caliber SVA-900T 00000045816

Soldering Caliber SVA-900T 00,000,045,816 great tool tool for 1300 rubles and 900 watts, which can be used for welding of polymers. High power ensures high-quality sealed connection. This kit includes a nozzle with a diameter of 20mm, 25mm, 32mm, 40mm, 50mm, 63mm and stand under the heating element. Heating elements have a Teflon coating. Soldering weighs just 3.6 kg, which provides convenience during long operations.

Price: ₽ 1 269

ENKOR ASP-800 56950

Soldering ENKOR TSA-800 56950 800 watt additionally equipped with a thermostat for temperature control and costs about 1600 rubles. It is possible to simultaneously set 2 tips that will save time when working. Rubber-coated handle provides a sure grip, preventing slippage hands. Facilitates work light weight - only 3 kg.

Price: ₽ 1 600

Top semi-soldering pipes

Black Gear PPRC 1500 W

Soldering Black Gear PPRC W CN-1 500 005 20 × 63 IS.090786 power of 1500 W is about 3000 rubles and provides rapid heating of nozzles and the pipes themselves. The unit is available in a set, which has a nozzle diameters from 20mm to 63mm, the key to their installation, support, and pipe cutting scissors, level, tape measure, carrying case. On heating elements Teflon coating quality. When using the nozzle does not adhere to polypropylene.

Price: ₽ 3 039

sturm TW7219

Soldering Sturm TW7219 1900 W 2 has heating elements which can be switched on separately, which allows to select the optimum mode of operation for each specific case. Heating is very fast, in addition, the tool is equipped with a temperature controller. The diameter of the nozzle included varies from 20mm to 53mm, which is sufficient for most of the work. unit price - less than 3000 rubles.

Price: ₽ 2 920

Best professional soldering pipe

Rothenberger ROWELD P110E Set 36063

The unit Rothenberger ROWELD P110E Set 36063 - is a professional unit price of nearly 37 000 rubles for manual welding of pipelines. Non-stick coating on the heating elements ensures that no sticking problems polypropylene. Can be operated in such a soldering different materials: polyethylene, polypropylene and PVDF and PB. It is an ideal device for those engaged in professional installation of internal communications plumbing and heating systems. The device has a power of 1300 W and a set of nozzle diameters 75-90-110mm. The temperature controller has a liquid crystal display. Unit weighs only 2.2 kg, which is a big plus, if necessary, carrying out long-term work.

Price: ₽ 35 689

Rotorica CT-110GF Medium

Soldering the socket Rotorica CT-110GF Medium designed for welding pipes and fittings of PE, PP, PVDF, PB diameter of 75mm, 90mm, 110mm. The heating element has a high-quality non-stick Teflon coating, so that the work can be done quickly and cleanly. The design is implemented a digital temperature control. Built-in mount for the base and clamp allows to use the tool more convenient in operating conditions and compensates for the inconvenience of a large weight of the unit. You place the unit approximately 9500 rubles.

Price: ₽ 9 500

The comparative table of the best tips for plastic pipes

FAQ

That reliable soldering or welding of plastic pipes?
In fact, the term "welding" with the advent of user-friendly tips for plastic began to be used only been applied to metal pipes. With the advent of pipes of polypropylene and other polymer materials significantly simplified mounting technology. Plastic tubes were cheaper, easier and simpler for installation purposes. They are easy to cut, bend and solder using a special soldering. Working with them can be classified as clean. In addition, they are extremely durable and do not corrode. Therefore, plastic pipe soldering with soldering to date - the only rational method of installation of pipelines, especially considering the low cost price of the equipment.

Where can I buy?
Buy soldering plastic pipe on the cheap can be in almost any store tools and equipment, including on-line sites. The main thing is to orient correctly, that you need not to overpay for unnecessary professional functions.