Counter of bank notes and coins: how it works, functions, how to use

How does the counter of banknotes and coins

The principle of operation for counting bills device has structural differences from the coin counter but combines them one - counting the number of currency units.

In the devices for counting the money put in a special container, and pressed the start button, then follow the steps in the automated mode. Each model runs on a specially set program.

For counting coins poured into the hopper-like bowl, where they are held in a special unit - tract, which is sorted by thickness and size. Coins are counted and loaded in the output tray, and the results are displayed.

For detailed information on already sorted the money, stop operation of the counter and the information shown on the display, and is detailed as necessary.

The algorithm works in counting banknotes - cash is invested into the connector intended for them, in which a separating mechanism. Each model has its own method of separating, but the objective of the system is similar in all vehicles - a separate bill from the total package. Subsequently, the bill passes the sensor system determining the denomination and the total number of leading count.

Counters of cash used in the banking business and stores, since it is much easier to work cashiers. The devices are installed in enterprises where there is a large turnover of cash.

The sequence of operation:

• Inclusion in the power network;
• Loading notes or coins in the path to a special pocket;
• Pressing the start;
• Getting results on the display.

types

Roller - factional banknote counters. Different from other types that capture the bills from the pack with built-in rollers made of rubber or polyurethane. Then, they are separated from one another and fall into a receiving hopper.

The roller-mounted sensors fractional counts of various types which are able to determine the authenticity of banknotes. However, in the process of conversion, paper money wear out much because of the pressure rollers and other mechanisms.

Most often wear occurs when working with the new devices.

Vacuum banknote counters. Counting occurs directly in packets intercepted tape or a rubber band for money via vacuum heads, considering corners bills. Vacuum devices feature low noise and high precision.

Devices for counting bills are divided into three classes:

• The middle class, are used in small offices and at the box office, where the amount of money is small. Operation is allowed no more than 5 hours per day, at an overload, and technical errors occur zazhevyvanie bills.
• High-end - the most common models in the market. Used in shops and banks in which high processing cash. Ability to work without a break of about 7 hours.
• Apparatus for big banks and supermarkets around the clock. Operation in continuous mode may be carried out during the day. They are expensive, but justified.

Coin Counters are divided into three types:

• The weighting pattern count coin weights of high accuracy;
• Mechanical devices with manually setting the size and weight of the coins;
• Electronic determining the number of banknotes by sensors.

The result is displayed on demand or automatically.

Devices for counting coins are divided into two classes: standard and professional:

• The use of standard models is possible in settings where the flow does not exceed several tens of thousands of coins per day. The device works without a break for 2-3 hours, after which they shut down to prevent damage.
• The organizations of the bulking operation and circulation cash used professional devices operating within days without stopping. Such organizations include the banks' vaults, mints, supermarkets and car parks.

The professional unit added features:

• automatic reverse. Motor direction is in automatic mode in case jammed coins.
• automatic loading of coins to a working drive tray.

detection

Counting machines check banknotes:

• in thickness,
• density,
• to size,
• by magnetic marks.

On the number of types of detection in one unit depends on its cost.

Through detection of the size, use and other verification methods. Size - is not an essential feature when determining forgeries.

Detection of optical density - a simple and reliable way to check. We study the density and adherence to the parameters: thickness, label structure.

To conduct an audit of the magnetic strip, you need to download the notes correctly. Tincture of this function is complex, but that it can accurately identify fakes.

Infrared detection - a universal method of authentication. It identifies suspicious banknotes, however, and it is best done in conjunction with ultraviolet detection and checking of the magnetic strip.

Function meters for banknotes and coins

Automatic start. When you load the cash into a special pocket counting begins at the same moment. It is not always convenient, because it is not possible to improve the bill, knocked out of the pack. As a result, unevenness of the banknote wrinkle, which causes the braking operation. The mechanism has to stop and retrieve dented bill.

Summation. Due to the possibility summing the total number of banknotes loaded and their nominal value, there is no need to run separate checks.

pre-packing carried out at random or fixed. At a fixed packing set the exact parameters of the number of bills.

Upon reaching the predetermined value, operation of the device stops, and the result is displayed.

Sort by par. The function has gained popularity because of the possibility of conversion of banknotes in a mixed pack. The screen displays the total number of banknotes by denomination and division.

Sort by targeting It allows to produce an entire count a stack of banknotes and distribute them in a predetermined manner.

remote display installed on all modern devices and displays information about the results of the conversion.

Connecting to a computer. With the help of a special program installed on your PC is completely controlled by counting and sorting process.

Powered by batteries It allows you to rearrange the device without turning it off. Feature is present on many models.

counting speed It depends entirely on the model and the device series and is 400-2000 bills per minute. The rate is adjustable and decreases from the translation of worn banknotes.

Function models for coins counting:

• Automatic start when filling cash receiving tray;
• Sorting at par;
• Connecting to a computer for monitoring.

Benefits

Apparatus for banknotes counting - invaluable assistant for enterprises. Its use allows you to quickly check a large amount of cash.

Benefits:

• The precise count.
• Low noise operation without interfering with the employees.
• Display showing all the necessary information.
• Regulation of the rate of counting banknotes.
• Manual and automatic start, greatly simplifying the work load at the branch of the bank or supermarket work.

Current models have a lot of useful features and benefits, without which doing business would be impossible or difficult.

coin counters They have their advantages:

• Regular opportunities to display the result of the counting.
• The total amount for each tray.
• Output total.
• Displays information on a separate display for the convenience of its perception.
• Packing coins at face value.

Problems in the use

Use of the machine for counting banknotes difficult:

• Amortization of notes during their conversion. Should pay attention to the condition of banknotes and to establish the appropriate speed in order not to break the bank notes.
• Worn bills often get stuck, and the process of their recovery takes 3 to 10 minutes.
• In the standard version, time from 2 to 5 hours per day.
• From time to time it becomes necessary to replace parts (gum or wheels).

A complication arises from the operation counters of coins:

• When calculating metal money sometimes get stuck in the trays. Trapped coins are not included in the final results, because of what is necessary to restart the test.
• Some models do not feature automatic loading.

How to choose

When planning a purchase, you should decide which operation will be operational. It is taken into account and planned load, and the amount of processed cash.

If properly determine the flow of checks, it is possible to overload the machine, and it will fail prematurely. For businesses with a constant circulation of money is better spent on a quality product from the reputed manufacturer. For a simple calculation of profit at the end of the working day - enough for a standard device.

Each manufacturer has a range of models, from the most simple and low cost to expensive with a set of additional functions.

what better

Ability to check and double torn banknotes and banknotes presence mark consisting of one half. This feature is found only in high-end professional models, but very useful.

Sdvoennost verified by the thickness and density, as well as through research to the light. Checked identification features of banknotes, and if one of them is absent, it is concluded bogus or breakage.

The high counting rate and speed control modes. High speed is a useful function, but it reduces the accuracy of calculation of the old banknotes. Also at low speed is considered mixed packs. Thus, the mode switch is required for the devices - the second and third grade.

Possibility of fixed and random packing. Combined filling and counting process. Set the desired number of banknotes by using the random packing or select one of the options offered by the apparatus enclosed in its memory.

Start automatic and manual. Mode switching - an important feature since the automatic start is not possible to correctly perform the fine setting of the stack. When you manually start a denomination are located exactly, and only then press start.

accumulation mode helps in cases where funds are recalculated for a long time operation of the machine. It is used in banks and retail outlets when held control of the employee.

pack test mode aims to correct its formation. It helps in cases when there is no a single note, or their number more than necessary. The unit gives a warning and displays the data on the exact number of notes.

Choosing the counter, pay attention to its appearance on the body should be free of cracks and chips.

Function models 1 and 2 classes differ. Standard counter does not function and the detection of the sub-screen, it is necessary to work with large volumes of cash.

Preference is recommended to give a solid models, because of their durability, operation 24 hours a day, the availability of additional features and functions.

How to use the counter of banknotes and coins

Before using the device, make sure that tray is empty. Turn the power switch, and then run the self-test. In the case of machine is ready for operation, the display shows the number "0", or in some devices inscription, signifying readiness for operation.

• Do not overload the machine. When buying, pay attention to the number of hours of possible use in a day, and do not exceed the specified data. Avoid overheating of the body.
• Model units 1 and 2 classes in the default operating mode of packing. To change the mode, refer to the manual that runs for each model. Depending on the manufacturer the steps may be different.
• Before downloading the coins, make sure that after the last conversion in the Tray and the machine is nothing left. After checking the money loaded in the tray, and press the start button.
• To automate, select the menu item "dim".
• start button to turn on / off the device, and for resuming work.
• If cash is too much, and the receiver is filled up to the mark, the machine stops and the tray is released, otherwise there are glitches and delays.
• During the stop data is not set to zero the unit, and counting will continue on the basis of the available data. After the end of the conversion the total amount shown on the display.

Operation of the device is not complicated, subject to the order of operation. However, sometimes there are problems you need time to find and fix, for the further operation of the device.

Also, care should be provided, associated with the cleaning counter stuck coins from dust and replacement of worn parts. These actions affect the life of the device.

To extend the life of the device and reduce the risk of breakage is recommended:

• Dusty brush cleaned place, or else by means of air jets. Sensors be cleaned with compressed air to remove adhered thereto paper particles and dust.
• For cleaning, remove the screws and the housing cover.
• Before removing the housing unit is transferred to "off" mode and unplug from the mains.
• , Pressed Knop «Report» to check before turning off the total number of counted coins by denomination. The number is displayed.
• That the instrument was working properly, do not forget to reset the data after each conversion. If this is not done, the appliance will summarize all the invested money. To reset the data, press "C".

To install the packing mode, press the «Set» button and clamped as long as the display shows the correct denomination. Thereafter clamped «Bat» button and set the desired size of the packaging.

Other options that are set for each denomination. When on any - any given value reaches the desired amount, the machine automatically stops and the face value shown on the display, which shows the number of coins counted.

It should be remembered that the parameters set for packing are stored in the system memory and are used by default.

The warranty on the counters of money

The warranty certificate issued to when buying a device, repair prescribed conditions and possible replacement:

• Before taking the unit for repair, specialists conduct his diagnosis. Perform inspection for faults and their causes. A minor failure is corrected on the spot. In case of serious damage the unit is sent to a special service center or replaced with a new one.
• Depending on the model, the warranty is 1 year to 3 years. When the rules of operation repairs are free warranty center. Professionals can easily determine whether the failure or deliberate production.
• If, during the warranty period issued new notes and coins, the specialist will install software updates. After the warranty period, you can install the update yourself by downloading the software on the official website of the company - the manufacturer.

Service support is trips to the office, or at home, troubleshooting and maintenance, replacement of worn parts with new ones issued by the factory - manufacturer.

If the device failure occurred due to careless handling, no warranty is valid. When you contact a qualified technician immediately determine the cause of failure.

If the cause of malfunction of the device lies in the poor quality items, made to repair or replace the goods. If breakage accomplished because of the buyer (gum torn due to improper cleaning of the apparatus and removal of the cover, or because exceeding the possible operation time during the day, etc.), the buyer, in accordance with the Treaty of Guarantee, repairing the device for its score.

Checked the date stamp and the seller. Without them, the warranty is not valid.

During the warranty period repair is carried out as necessary.

Malfunctions, repairs, spare parts

Do not go for the coins in the conversion channel, or fall out of it as worthless. This is an indication that lost its range, regulating the diameter or whether it was initially installed correctly.

Troubleshoot this problem:

1. remove the lid, which closes the path broaches,
2. raise the transport belt and hold the adjustment path width so that the coin could pass freely.

After verifying the cap is set in place. However, you need to check that the diameter of the position indicator of coins with the mark on the scale.

Another problem occurs in case the proper installation of the diameter, but is still not coins are held in the desired direction. In most cases this is a consequence of improper installation thickness. The algorithm is the same action as that of the channel adjustment, only focuses on the thickness of the stopper.

During prolonged operation of small coins stuck in the channel. This is a consequence of wear substructures under the wheel - when removing the cover can be clearly seen that the base groove Inst. The base replaced. Sometimes you need a replacement belt.

manufacturers

Cassida - US company specializing in the production of equipment for the conversion of money. Cassida develops and delivers cash counters, sorters, packers of banknotes, repair equipment under warranty service centers.

CME - develops and manufactures office equipment. CME devices are sorted and counted the cash, have a detection function.

DIPIX - positioning itself in the market as a developer of office equipment - counters and sorters of banknotes, detectors, vacuum packing machines, coin counters. Our employees develop original products. There is a desire of manufacturers at the highest level to meet the needs of customers.

Products are developed according to modern technologies and work on long-term assignment. Company DIPIX - distributor of goods in the territory of the Russian Federation.

DoCash - trademark. Activities are focused on the supply of accounting machinery equipment. Offices are located in Russia, Asia and some European countries. The company's mission - to promote circulation of cash and reduce cash costs to produce. DoCash devices are popular among consumers.

DORS - Russian company with high success rates. DORS manufactures and distributes office equipment, counters and cash register equipment. The goal - to reduce the losses arising from the execution of operations with money, cash and electronic.

The company is struggling with falshivomontchikami, produces the program with new authentication methods.

Dors has developed a way to test the cash - by detecting phosphor forge that is not possible, due to lack of material in nature and strictly control them.

Glory - manufactures office and storage types of counters, budget and luxury. The company seeks to establish reasonable prices that will purchase equipment to all firms and to avoid the rise in circulation of counterfeit money.

Kisan - world market leader in the production of office counters bills. Kisan production units 1 and 2 class, with an additional screen, detection and rapid account.

LAUREL - one of the leading companies in the world, acts as the exclusive distributor in Russia and CIS countries. The activities carried out in accordance with international standards. Each buyer receives a warranty on product quality, depending on the model - from 1 year to 3 years.

Magner - official Russian distributor. The company develops and markets software for the counters, the program updates the consumers in case of issuance of new banknotes and coins. Hold regular events, with the purchase of the counter - a gift.

Mercury - produces several types of cash registers, and currency detector. The company has its own delivery service of ordered goods directly to the home or office. It carried out after-sales service.

SBM - it was established as an organization for the development and production of useful products for the home and office. All purchased goods are warranted. If the country was made a re-release or issuance of new banknotes, the company specialists will reinstall the software on the proprietary devices.

Scan Coin - produces instruments with which is produced by optimizing and sorting. The products are manufactured with high quality guaranteed.

Union It manufactures and office detectors and counters high quality of banknotes. The warranty period - three years from the date of purchase. Warranty card is handed to the buyer, and is presented as necessary. If repair is not possible, given the new device of the same model.