Of 6 kinds of the best overhead radiant heaters: how to choose what to buy, the pros and cons, features, rating

Ceiling infrared heaters are panel mounted on the ceiling and operating on the principle of solar heat radiation. IR-type devices do not create a heat flow. Heating occurs due to heat transfer from the surrounding objects, not the air.

How to choose a ceiling infrared heater

Ceiling type infrared devices are installed in homes, outdoors, in greenhouses and in the workplace.

What are infrared devices

On the market are infrared devices for street and internal wiring. Manufacturers produce household and industrial models that differ in appearance, the temperature of the heating and power. There samples for building high-humidity (saunas) and protected from explosions.

infrared heaters Ceiling type are:

• with temperature control and without it;
• gas;
• electrical;
• open and closed coolant.

There are differences in the wavelength emitted by the device:

• shortwave intended for building height of 6 m;
• medium-wave - for objects 3-6 m in height;
• longwave - installed in the premises of up to 3 m.

The heating elements are:

• carboxylic (heating occurs due carboxylic filaments);
• quartz (Heating is carried out tungsten filament);
• ceramic (Case of such a device is not heated);
• tubular (TANS);
• halogen (coolant acts as an inert gas which is in the tube).

Manufacturers produce low and high temperature models. For small dark spaces selected samples (do not glow when heated) with low temperatures. For larger production space heaters choose the type of light. They are used in stadiums, warehouses, open exchanges.

For greater efficiency of the infrared heater type with ceiling mounted device platten. It retains heat and reduces the loss of energy carrier.

Pluses IR heaters

devices the efficiency is 95-98%. The room is warmed vertically towards bottom-up. Due to this heat quickly fills the room, the power consumption is reduced by 5-10% for every degree saved. Jobs infrared devices does not require constant monitoring by humans. They are cheap in comparison to other heating devices. Since the ceiling systems are static and do not contain any moving parts, care for them is minimal, there is no need for maintenance.

Infrared heaters also have advantages in comparison with other types:

• Large heating rate;
• as in the models of this type is not fanThey work silently;
• easy and quick to install;
• do not emit light;
• fireproof;
• It is possible to separate heating zone premises;
• Infrared rays have a positive effect on the organism.

Minuses

A relatively new type of technology for space heating has a number of drawbacks:

• after turning off the room cools rapidly;
• there is a limit heat flow power (if it exceeds 350 W / m², the radiation becomes detrimental for the organism);
• a beam coverage area pattern is not placed, objects made of artificial materials (these may be deformed by heating);
• at purchase of a ceiling device into account that the distance from the heat source to the head should be at least 50 cm;
• mounted on the ceiling of the materials that are unstable to heat, it is not allowed.

subtleties choice

Depending on the heated area and the operating conditions calculated amount heaters. set one device for a small room to work on large areas - a few. When choosing a model, take into account a number of indicators.

1. Before choosing a ceiling infrared heater determine what area it should work. For industrial, office and storage space large area heaters are choosing powerful light type.
2. An important indicator is the state of the ceiling. Beams, floors, tensile structures must withstand the weight of the model.
3. ceiling height must ensure the normal flow of heat.
4. coolant type.
5. For mounting on the ceiling are choosing lighter model with an aluminum body, film equipment.
6. Remote control unit, the overheating sensor, the thermostat in the sample. In the presence of these devices is simplified service model.
7. A large area set several models.

While respecting the choice of the device will last for a long time, and power consumption will be minimal.

installation subtlety

heaters set parallel to the windows, doors, curtain wall. If you plan the installation of multiple instruments, make calculations to ensure uniform heating of the room.

A heater mounted in the ceiling at a height of 2.5 m, an average running over an area of ​​20 m². On sale is suspended heaters, and built-in models.

Best Ceiling infrared heater with thermostat

models with thermostats economical power consumption. When installing several devices on the ceiling using a thermostat on the room. The apparatus controls the temperature, depending on the parameters enables or disables the heater.

Peony Model meet current demands of customers, including low power consumption and high heat dissipation. The sample has a dispersion angle 120˚, housing made of aluminum alloy powder-coated. Color palette - white and color of the wood. The manufacturer also offers a line of Peony Suite. Models differ in color, capacity, complication. Heaters are sold with or without a thermostat and wire them.

Model Peony Suite 0.4 M plus thermostat is a low. It is mounted in bathrooms, storerooms, bathrooms, hallways.

Characteristics

• Power - 400 W;
• voltage - 220V;
• weight - 2.3 kg;
• working height - 1,8-3 m;
• work in winter - 4 m²;
• in autumn / spring - 8 m²;
• installed on the ceiling, finished with wood;
• exclude overheating or subcooling premises;
• Included with the device is a German thermostat;
• IP 54 protection.

pros

• the thermostat is activated 1 second;
• temperature adjustment in the range 5-30˚;
• high quality thermostat German production;
• resistance to moisture;
• installation mode for a day or a week;
• light weight.

Minus - small capacity.

Best film ceiling heater

infrared instrument film type consists of:

• a polymer dielectric film;
• heating elements disposed on the surface of the film;
• wire feed current;
• reflective screen.

The film consists of a non-woven fabric, coated on both sides with a layer of plastic.

After connection to a power source film is heated and radiates heat. The heat flow is identical to solar radiation with a wavelength of 9 microns. The reflective film directs the flow of heat into the room. film type devices used as basic or auxiliary heating source.

Ceiling film heater "Zebra" is popular among consumers due to its high heat dissipation and ease of installation.

Characteristics

• supply voltage - 220V;
• power limit - 200 W / m²;
• weight - 500 g / m²;
• heat transfer - 100%;
• the level of protection - IP 44;
• thickness - up to 1 mm.

pros

Due to the flexible surface carboxylic film is used for the relief and other difficult surfaces. Under such heat radiator is not set screed, an adhesive base. Material is actively implemented in other areas - Drying food, Trees, soil in greenhouses. The carbon film is set in garages, offices, schools and homes. Also the film:

• It does not take up a lot of space;
• a temperature control;
• easy to install;
• It has a lifespan of 5 years;
• suitable for installation on columns;
• resistant to voltage drops;
• It does not absorb oxygen.

Minuses

• way heater;
• only suitable for thermal insulation of houses;
• for heating large spaces, you must install the film large or multiple instances;
• to evenly heat the room, you must select the proper location for the model.

Best electric ceiling infrared heater

Ceramic ceiling IR devices consist of a spiral, surrounded by a ceramic shell. They are protected from dust, moisture and temperature variations. Due to the fact that the heating element is closed, it does not oxidize. The lifetime of the heater for longer than other IR models.

One of the most popular heaters is ECS1 spherical shape of the working surface.

Characteristics

• Device type - dark;
• Power - 1000 W;
• Actions angle - 75˚;
• the average temperature - 730˚;
• wavelength - 2.9 microns.

pros

• It does not light up during operation;
• It heats a large area;
• long service life;
• resistant to chemicals.

Minuses

• brittle material body;
• a heat source may be damaged when a strong jarring of the heater;
• produced only in white embodiment;
• delivery and installation require careful not to damage the device and the coolant;
• to work effectively you must install the reflector ECR.

Best Ceiling infrared heater to testify

To install the country best suited Model Almak Russian production. The device has a beautiful casing with rounded corners, it is easy to install. The manufacturer produces a wide product range. Depending on the power of changing the weight, size and price of the device. Available capacity is 500 samples, 800, 1000, 1300, 1500 Watts.

Color spectrum:

• white;
• wenge;
• silver;
• beige;

For installation at the cottage is suitable compact model Almak IR 5. This low-temperature device designed to work in small spaces.

Characteristics

• Power - 500 W;
• voltage - 220 volts;
• winter heating - 5 m²;
• work in the off-season - 10 m²;
• weight - 1.6 kg;
• color - beige, white.

pros

• light;
• while the body is not heated (model suitable for wooden buildings);
• suitable for rooms with a lot of furniture;
• universal color and design - suitable for rooms of any style;
• It does not light up during operation;
• economical.

Minuses

• mounted on the ceiling height of 2-2.3 m;
• low power.

Best Ceiling infrared heater for the home

IkoLayn Model 0.4 It takes the leading position of sales in the Russian Federation. Longwave instrument of domestic production does not emit toxic substances and odors during operation. The model has no moving parts and do not require lubrication to operate the transmitter. Mounting and dismounting is carried out easily. This is the best choice of infrared heater ceiling type for home use.

Characteristics

• Power - 400 W;
• winter heating - 4 m²;
• heating in the off-season - 8 m²;
• weight - 3.5 kg;
• White colour.

pros

• universal pattern for any design space;
• mounted on a suspended ceiling;
• economical.

Minuses

• low power;
• Low overall depth;
• there is no indication of the instrument.

Best Ceiling infrared heater of a new generation

Ceiling heater Ballu BIH AP 08 It refers to a semi-industrial type. It is installed in residential and industrial premises.

Characteristics

• Operating Power - 800 W;
• power consumption - 0.8 kW;
• voltage - 220V;
• radiation angle - 120˚;
• winter heating - 8 m²;
• additional - 16 m².

pros

• Universal, suitable for domestic and industrial needs;
• automatic shutdown response when overheated;
• low price;
• there is moisture and fire protection;
• It is equipped with a two-layer reflective lining;
• the side parts are made of stainless steel, which makes the device resistant to mechanical damage.

Cons have been identified.

Large assortment of ceiling infrared heaters allows you to select the model to be used in specific circumstances. Models for the cottages, apartments or greenhouses are beneficial because they save resources. Radiators do not absorb oxygen, and does not require additional ventilation of the room during operation. Subject to normal use infrared radiation has a positive effect on the human body.