The best aluminum radiators from buyers' reviews

Recently, residents of homes in Russia began to approach the standards of Europe, and light and pretty radiators made of aluminum fit into them as well as possible. The best aluminum radiators are suitable for connecting them in heating systems in private houses and cottages. Due to the fact that in the central heating systems of multi-storey apartment houses, it is rather weak water treatment, it is not recommended to install radiators there, since there can be serious consequences even after the next preventive examination. When choosing, it is worth taking into account a lot of important details that affect their performance most of all. Despite the huge choice of positions in the market, you may get caught in Chinese fakes, which will not work for a month. Based on this, we have made a selection of the best aluminum radiators, which will serve as faith and truth for many years.

Aluminum radiator of which company to choose

In the modern market,.Their devices may differ in characteristics quite a bit, but in the work they can show themselves completely differently. The best manufacturers are some Italian companies, whose devices differ in their elegance and form, and a couple of Russian developers trying to copy other devices.

The following companies are listed in descending order of popularity and popularity in our country:

1. Global

2. Royal

3. Rifar

4. Ferroli

Do not forget that inexpensive handmade items of Chinese companies are not onlydo not correspond to the declared capacity, but they can not stand a couple of months either. The discrepancy in the parameters is up to 35%!Make purchases only from trusted manufacturers of aluminum radiators.

The best sectional aluminum radiators with side connection

Royal Thermo Revolution 350 x14

These radiators are produced in a factory in Russia, despite the fact that their manufacturer is from Europe. Thanks to this, they are fully adapted to the climate in our homeland.

The shape of this device is made in a special way so that in those areas where heated air comes out, deflectors are formed, so that the air is evenly distributed throughout the entire area of ​​the room, leaving no layers that will weakerly warm up. The coolant can act not only water, but also antifreeze.

With the help of special PowerShift technology, patented by this company, heat transfer of the radiator increases by several percent. The maximum heat dissipation of the radiator is 1974 W, and the temperature with which it operates is up to 110 degrees. A total of 14 sections are delivered in the kit, with a total weight of 14 kilograms.

Based on many positive reviews, this radiator has the following advantages:

• High energy efficiency;
• Special design, improving aerodynamics;
• High ergonomic device;
• Good paint quality;
• Alloying additives that improve reliability.

Cons:

• Sensitivity to the choice of water quality.

Tessen 500/60 x8

This radiator, which consists of a heating battery of eight sections, is able to bring heat on any day. It is suitable for installation not only in a residential building, but also in a public building, which has a water heating system.

The room is heated not only by the radiation of heat from the device itself, but also by convection. All the details of the section are made of aluminum alloy and connected by means of nipples. Increased resistance to corrosion in combination with high mechanical strength makes it possible to use this unit for a long time. The device weighs a little - only about 6 kilograms. The center-to-center distance is 500 millimeters, and the working pressure is 16 bar. A radiator is produced by injection molding.

The main advantages of the device, which are based on feedback from users:

• Light weight;
• Stylish and ergonomic design;
• Easy installation;
• High degree of strength and corrosion resistance;
• Low cost.

Cons:

• Poor-quality painting.

Global VOX EXTRA 350 x10

This radiator is created by the best radiator manufacturer in the world, the company is located in Italy. Developing this cast aluminum model, the creators took into account its work in specific climate conditions, reminiscent of the Russian.

The device has a fairly high heat transfer rate of 890 watts. During painting used a special method of two stages, thanks to which the appearance of the device will remain unchanged for many years. Each section has a length of 9.5 centimeters, because of which the radiator can fit even in a small space. The device operates at a maximum temperature of 110 degrees, and weighs about 10 kilograms. The heat carrier has a maximum pressure of 8 bar, which is not the highest, but it is enough to use the device both in houses with several apartments and private cottages.

With the help of many feedback from the buyers of this device, we were able to identify the main advantages:

• Painting done on a two-stage system;
• Compact;
• High reliability of the device;
• You can connect up to ten sections;
• Nice design.

Negative:

• Average price.

Global VOX R 500 x12

Another device produced by the famous brand from Italy. This model is adapted to be used in both suburban and closed, and central heating systems.

In such systems, there should be a distance of about 500 millimeters between the input and output tubes. Artificially reinforced construction and inner layer for protection from fluoro-zirconium, not only ensure a long work of the radiator, but also increase its resistance to a heat carrier of poor quality. The device has enough good heat dissipation - two blocks of six sections is enough to heat the room up to 30 square meters.meters. Maximum pressure of the device reaches 16 bar. The volume of the device is 5 and a half liters, and the center distance is 50 centimeters. The machine weighs quite a lot - at 18 kilograms.

This aluminum radiator, based on positive customer feedback, has the following advantages:

• Excellent heat recovery;
• Highly efficient energy distribution;
• Not a bad quality paint;
• Presence of a special protective layer.

Cons:

• The radiator is not suitable for all heating systems.

IPS Elegance 500 578 x8

The radiator, which has a very good design. It is produced in Russia, although the manufacturer and the European one. Its development was carried out with all accounts of heating systems, both automated and centralized. It is used to heat small office buildings, both low-rise and high-rise. In addition, it is widely used for heating industrial buildings.

The device has good parameters - heat output of 968 W, and the maximum temperature at which it works is 110 degrees. It consists of eight sections, with a maximum working pressure of up to 16 bar.

The main advantages of the aluminum radiator model, which we identified from customer feedback, are as follows:

• High heat dissipation;
• Good resistance to corrosion;
• It's easy enough to install;
• Compact device;
• Thoughtful and useful design.

Cons:

• There is a sensitivity to what the water consists of;
• If air bubbles appear, additional equipment must be installed.

Best aluminum radiator with lower connection

Rifar Alum Ventil 350 x16

The Russian manufacturer has developed the Ventil series especially for those people who need to connect the radiator from the bottom. A special thermostatic valve can be installed on this model.

The very small wall thickness of the sections and the oval section with specific geometry guarantee a huge working pressure of 20 bar and high heat output of 2448 watts, which is provided by a large number of sections, with a total weight of 19.5 kilograms. The volume of all sections is three liters, and the distance between the axes is about 8 centimeters.

This model has the following advantages, which we found out from customer feedback:

• Pleasant ergonomics of the device;
• High heat dissipation;
• Resistance not only to surface corrosion, but also to the effects of chemicals.

Negative:

• For cleaning, you must use special equipment.

Best tubular aluminum radiator

Purmo Aquilo F1T 90 290 x1 ​​

This model is an amusing technical solution from a company from Finland. Radiators are installed in the floor of the heated room. The heating element is a thermal element of black color, which is installed in a galvanized black bath of steel.

The performance of the radiator is enhanced by a noiseless centrifugal fan with 12 volt motors that dissipate the warm air produced. According to feedback from users, the complete set lacks a transformer, without which it is forbidden to use this device, the grille and the regulator responsible for the fan speed. Connect the device can be using two branch pipes with a special thread. The device operates at a pressure of 10 bar and a maximum temperature of 110 degrees.

Given the feedback from buyers of this radiator, we found the following positive characteristics:

• The device is very compact, which saves considerable space;
• Excellent heat recovery;
• Stylish design;
• Ergonomics.

Negative:

• High cost;
• You need to buy additional equipment.

Which aluminum radiator to buy

1. For users who need an aluminum radiator for a small price, the model Tessen 500/60, x8 and IPS Elegance 500 578 x8 is perfect. Both radiators weigh a little and have a small number of sections. They are inexpensive, but they can even provide heat to the cottage.

2. Global VOX EXTRA 350 x10 is suitable for those people who, above all, appreciate the quality in everything. The manufacturer of the device is a company from Italy, which is considered the best in its business. The device has a high heat output and a high operating pressure.

3. Rifar Alum Ventil 350 x16 - the device of Russian origin is suitable for buyers who do not want the radiator to take up a lot of space. At the same time, it has just a huge heat dissipation and weighs a lot.