Of 6 kinds of the best types of miter saws: how to choose what to buy, the pros and cons, features, rating

Miter saw is indispensable for carrying out repairs and various construction works, which require quality and precision cutting pieces. Among the many types and models there are tools that can work not only with the wood of different hardness and plastic, but also cut the soft metal. Design features, capabilities, and functionality of individual saws are different, as well as the convenience of working with them. For this reason it is important to properly approach the selection process of this tool.

How to choose a miter saw

On the scope of miter saws are divided into:

• household - have a low strength, precision cutting, are not able to cope with high loads. Often have a low weight and modest specifications.
• Professional - designed for continuous uninterrupted operation, have high strength, all as constituent elements fitted tightly to perform high-precision cutting

engine's type

Motor size matters - smaller it is, the greater will be heated. The following types of engines:

• asynchronous - a reliable, does not require frequent maintenance. Often found on professional models. Suitable if you plan to frequent tool maintenance.
• Collector. This engine is equipped with household-level model. Among the disadvantages noted rapid wear of contact brushes.
• Brushless. It has a high efficiency, silent, hardy and reliable. It combines the advantages of previous versions. Often installed on professional saws.

Power

The more powerful engine, the large diameter of the saw disk He is able to work. Moreover, its endurance above. Among the disadvantages - more weight tool. A powerful motor can handle bars of hardwood, and even soft metal. Power from 1.6 kW to 1.8 is optimal for household and industrial use infrequent.

Rotational speed

Cutting quality is directly dependent on the frequency of an idling motor. For household and professional models, this figure is in the range from 3200 to 6000 rev / min. Good miter saws are equipped with a control disk speed.

Type of transmission gear

• The gear - noisy but reliable transmission. With increased load on the disk does not scroll sawing. You may experience vibrations that can affect the accuracy of the cut.
• Belt - quiet, vibration-free transmission, thereby cutting accuracy is increased. However, the disadvantage is the scrolling of the motor shaft and the need for periodic adjustment.

Dimensions

Weight and dimensions are not important when choosing a fixed miter saw. But if you plan to carry a tool often, these settings will affect the ease of working with him. Domestic models should not be too heavy, but it should be remembered - the smaller the mass of the blade, the lower its capacity.

The cutting blade

When choosing a blade should pay attention to the saw blade parameters, especially on the diameter of the bore. Most models manufactured under 30 mm diameter. Most Coil outer diameter - 10 and 12 inches. The first standard discs are 300 mm and 305 mm, and the second - 250 mm, 255 mm and 260 mm. There are discs of larger and smaller size.

For operation with a large disk requires greater torque, but this increases the cross section of workpieces that can be cut. Design features of almost all drank do not allow the use of discs with a diameter greater than the parameters indicated in the passport. The smaller the size of the cutting element degrade performance.

Work at an angle

Most models allow you to cut at an angle. This is achieved by tilting the cutting part, its reversal, rotation desktop. If the saw is planned to perform not only straight cuts, it is worth paying attention to.

Additional options

• Illumination workspace - useful option in low light conditions.
• Ability to connect the bag to collect the chips or cleaner.
• Laser pointer.
• System of quick-change blade (keyless).
• Adjusting the depth of cut of the saw blade and the speed of rotation.
• maintaining the system under a load of revolutions.
• soft-start motor system.

Best Miter Saw with wire

Miter Saw Dewalt DWS 780 It refers to a professional level tool, used for floor and table, sawing wood blanks. Increased stability due to the presence of the tool legs and rails. start button is located on the ergonomic handle having a closed shape. Motor overheating prevents the build quality ventilation. For safe operation meets the transparent protective cover. The special design of the working table ensures its turn at 50 and 60 degrees left and right.

The positioning of the cut line produced shadow on the disc. The system also illuminates the workspace. However, in the bright sun shade is almost impossible to discern what is, though not critical, but the downside. For reliable and accurate operation of adjusting the operating speed is present.

Characteristics

• Power - 1675 Watts.
• rotation speed - 3800 r / min.
• Cutting parameters: height - 110 mm, width - 345 mm.
• Disc Settings: diameter - 305 mm, the fitting hole - 30 mm.
• Angles D: slope - to 49 °, rotation of - 60 °.
• Weight - 24.8 kg.

pros

• Power.
• Stability.
• Quality.
• A wide range of angles.
• The low noise level.

Minuses

• Poor standard clamp.
• Skip sawdust dust extraction system.
• A lot of weight.

Best combined miter saw

Combined miter saw from MAKITA LH1040F model designed for longitudinal and transverse cutting of wood, soft metal and plastic workpieces. For security has double protective insulation and engine brake which, when switched off completely stops the disc and the working space lighting. The main advantage of the saw - versatility, transforming the instrument into a sawing machine. To work with long workpieces provided table length extension, jamming the disc is prevented by a special riving knife.

Miter Saw MAKITA LH1040F made of a molded section of aluminum alloy. It supports the ability to connect pyleudalitelya. Smooth engine start is carried out by the system, limiting the inrush current. The tool solves a wide range of tasks on sawing materials.

Characteristics

• Power - 1650 Watts.
• Cutting parameters: depth - 93 mm (upper table - 40 mm) Width - 130 mm.
• Disc Settings: diameter - 260 mm, the fitting hole - 30 mm.
• Weight - 14 kg.

pros

• Build quality.
• Versatility.
• Smooth start.
• Backlight.

Minuses

• High price.
• Lack of broaches.

Best miter saw for wood

Model Metabo KGS 315 Plus It refers to professional tools. It is designed for use on wood, plastics and soft metals. Hardwood may be performed at angles of up to 46 ° (in both directions). For ease of operation meets thoughtful design. The tool works without problems for a long time under heavy load. The stock saw blade has a removable tooth. Also present in the equipment table extensions, clamp workpieces and high guide profiles that can be shifted to the side.

High productivity is achieved with a powerful motor and high-quality large-diameter saw blade. To work with different materials present rotation control function. The site is the second point of cutting chip removal. The electronic system VC, stored as stable revolutions under a load and idle.

Characteristics

• Power - 2.2 kW.
• rotation speed - 4100 r / min.
• propyl Settings: Depth - 120 mm Width - 320 mm.
• Disc Settings: diameter - 315 mm, the fitting hole - 30 mm.
• The angles of the work: the slope - up to 46 °.
• Weight - 26 kg.

pros

• Quick replacement of the disc.
• Reliability.
• Security.
• Cut at an angle.
• Stability.

Minuses

• High price.
• The weight.

Best miter saw for metal

Miter (assembly) Saw Makita 2414NB used for cutting PVC, ferrous and non-ferrous metals. when the security system includes a durable blade guard, protivoiskrovy screen that protects the work surface from contact with the tool. For fast disk replacement system is provided shaft fixation. Saw It equipped with double-insulated, has a compact size. It can be used for household tasks and for cutting metal workpieces in a small workshop.

Powerful enough engine is not only able to cope with metallic workpieces, but also successfully works in ceramics and stone. The guide plate can be displaced at an angle of 45 ° from the center, has 3 positions. It provided a device for quick-setting the cutting angle.

Characteristics

• Power - 2 kW.
• rotation speed - 3800 r / min.
• propyl Settings: Depth - 115 mm Width - 240 mm.
• Disc Settings: diameter - 355 mm, the fitting hole - 25 mm.
• Rotate the grip of - 45 ° in both directions.
• Weight - 16.2 kg.

pros

• The motor is not heated during intense and prolonged use.
• Smooth cut without beat.
• Qualitative vise.
• Is able to cut the rails.

Minuses

• When working with thicker metal requires a moderate load, otherwise the instrument may be damaged.

Best inexpensive miter saw

household tool Bosch PCM 7 It could be classified as a professional miter saws, if not for its low power, relatively small diameter of the disc and the total weight of 8 kg. But this model is ideal for use at home. This miter saw works with hard and soft wood. Before such embodiments the characteristics characterized by a soft pad on the handle, illumination of the working space, a compact size. Replacing the saw blade runs easily, there is a laser pointer.

The delivery Bosch PCM 7 pendulum type miter saw includes sawing a circle of a hard alloy clip for the material and a bag for garbage collection.

Characteristics

• Power - 1.1 kW.
• rotation speed - 4800 r / min.
• Cutting parameters: height - 50 mm, width - 110 mm.
• Disc Settings: diameter - 190 mm, the fitting hole - 30 mm.
• Angles D: slope - 45 °, rotation - to 46 °.
• Weight - 8 kg.

pros

• Acceptable quality cut with native disk 20 teeth.
• Horizontal fixing of workpieces with the clamp.
• Connecting a vacuum cleaner.
• Spindle lock.
• Affordable price segment.

Minuses

• Low quality native bag under sawdust.

The best hand-miter saw

Domestic class Miter Saw JET JMS-10 designed to work with wood and solid polymeric materials, is well suited for oblique and transverse sawing furniture parts. Also this model is easy to cope with its functions when laying wooden floors and laminate. It has a high performance and reliable design. To perform precise cuts equipped with a laser pointer, a protective casing made of a durable polymeric material. Working blade mechanism is assembled on the cast base and the desk can be lengthened due removable expanders.

The kit includes the miter saw scale, emphasis, clamping system and a bag to collect waste. Saw blade 40 teeth has a top speed of 4500 rev / min, which is sufficient to fulfill quality of cut, but it lacks the purity of the processing, such as sawing various decorative elements.

Characteristics

• Power - 1.4 kW.
• rotation speed - 4500 r / min.
• Cutting parameters: height - 75 mm, width - 135 mm.
• Disc Settings: diameter - 254 mm, the fitting hole - 30 mm.
• Angles D: slope - 45 °, rotation - to 46 °.
• Weight - 17.5 kg.

pros

• The presence of the laser pointer.
• Desk with removable expanders.
• Ability to take dust suction system or in a bag.

Minuses

• Difficulties when working with metal.
• The need to constantly monitor settings.

The main advantages of a crosscut saws used both at home and at work, it is the instrument compact, convenient handling, easy operation and maintenance. The right choice of model will increase the productivity of cutting wood, plastic and soft metals, save time and effort.