Frame pools: what better exploitation manufacturers

Carcass pool - a hydraulic collapsible structure, which constitute the skeleton of the hollow tube or a single sheet of metal.

Inside the frame is lined with a two-layer single piece of PVC of 0.75 mm maximum thickness, but between layers for strength PVC is reinforced with glass fiber or polyester mesh.

Principle of operation

Water filtration occurs through two holes in the board structure:

First step

Purification of the upper layer by a skimmer. A metal or plastic container with a mesh inside. It is specially designed for the upper layer, which contains an increased amount of dust, viruses and bacteria, hair and other debris.

Inside skimmer basket is in which large debris accumulates (container periodically requires cleaning).

The device is installed in the upper part so that the floating valve prevents water in the lower layers of the device.

Second phase

Deep cleansing. For this purpose, filtration units and systems. In modern prefabricated containers used automatic control system, which is equipped with a timer.

The third stage

Heating. It is used for built-in or stand-alone electric heater. It is connected to the filtration system.

The fourth stage

Disinfection. For the destruction of algae and bacteria made use of special chemicals, which contain concentrated chlorine.

The substance is difficult to dosage, resulting in the composition of such mixtures are constantly there is a surplus of the drug or the lack of it.

The desired effect can be achieved without the use of chlorine chemistry. The need to fill the cup conventional rock salt, the rate of 3 kg / 1 cubic meter. Within one day the salt dissolves, and then starts hlorgenerator and the water returned to the tank by means of nozzles.

Modern installations are equipped with cleaning and disinfecting automatic system that allows you to not be distracted by hardware control.

Kinds

Frame pools are divided into two types:

• reinforced - with a carrier liner. It consists of a metallic aluminum or galvanized sheet-frame on which is secured around the perimeter of the upper part of the liner. For supporting walls used perforated or latticed flanged sheets.
• lightweight - going from metal tubes which vdevayutsya in the bowl of polyvinyl chloride bonded to T-joints and vertical supports.

Constructions of this type are considered to be ground, but for security reasons, for greater comfort and stability of their partially or totally digged into the ground. Due to the metal rod can increase the height of the bead.

For assembly and disassembly no special tools. The instructions available and understood steps painted both processes.

seasonal design

To be dismantled at the end of the swimming season, because it is not designed for being on the street during the winter.

The package of this type usually includes:

• stairs;
• nozzles for filling and draining the vessel;
• Cartridge cleaning system integrated into the frame, or sand filter;
• set of hoses required;
• chemicals for disinfection.

At present the most high-performance cleaning device is a sand filter. It proved that he spends filtering several times better than other cleaning appliances.

All-season or frost frame pools

Spanning edges are reinforced around the perimeter and durable PVC framing. Equipped with sand purification plant and a skimmer.

The standard package includes:

• stairs;
• return nozzle;
• hoses;
• a sand filter;
• skimmer;
• aqueous cleaner for cleaning the bottom and walls of different kinds of pollutions and plaque;
• chemical cleaning agents.

Characteristics

collapsible pools in terms of volume are divided into two categories:

• for children - from 1500 liters;
• for adults - up to 50 000 liters.

The form:

• round (average diameter - 500 cm);
• oval (average size - 7h3,5h1,5 cm);
• rectangular (average size - 450h220 cm);
• in the form of eight (average size of one ring - 650h420 cm).

The weight depends on the framework material and the curtain, the length, width and volume of the product.

The kit, except compulsory manuals, DVD-ROM for installation instructions and pump, may include:

• salt water treatment system.
• Litter under the frame. It made of the same material as the bowl itself; This reduces the risk of punctures and scrapes the bottom.
• Cover. The material has a honeycomb structure, accumulates a solar heat, and without letting it back, gives water. Due to the comfortable temperature is maintained even at night.
• Stairs. By type of reminds ladder, One half of which is located inside the pool, and the other - from the outside.
• Awning. Completely covers the bowl, protecting it from dust and dirt.
• Set for cleaning, which typically includes a telescopic handle and the nozzle - a scraper squeegee.
• Net, skimmer and pump filter.

Optional accessories

• Table with fastening to the board.
• Inflatable swim-up bar.
• Floating stand for beverages.
• Volleyball net, which is attached to the bead pool.
• Floating basketball set.
• Dome (terrestrial or mountable to the frame sides).
• LED lamp, powered by solar energy.
• Floating LED lights with batteries.
• Lamp. Absolutely safe lamp, which is mounted on the wall of the pool anywhere. In this case, the wires are not in contact with water. The lamp consists of two parts and is held by the magnet. Method of electromagnetic induction from an external voltage is transmitted to the inner member.

pros

The main priority of prefabricated swimming pools is their affordable price.

Other advantages:

• efficiency;
• availability mounting and dismounting;
• speed of assembly;
• strength;
• ease of maintenance;
• practicality;
• durability.

• assembly time takes less than an hour after unpacking. In the configuration affects the speed and volume of the pool.
• Simplicity of design acts guarantee strength. Thought and fastening material detail. It does not require any complex manipulations, which can further damage the frame.
• Care for water quality and the condition of the pool easy. Necessary procedures communicated to the simplest action, as far as possible.
• Thanks to the proper distribution of weight and loads recommended storage and maintenance, operation of the frame and bowl life exceeds 5 years.
• To move the pond, you only need to empty it. The design can be easily transferred to the desired location.
• Broken elements can be easily replaced with new ones.
• Four Seasons pool can be decorated by ornaments of the same frost-resistant subjects.

frame Features

Frame basis from high strength metal tubes constructed so that assumes more than half of the water pressure. This greatly reduces the load on the cup.

Some modification of large dimensions equipped with the metal vertical struts with pegs stringed below. Recent saves backups from sinking into the soil, and the capacity - from tipping over.

high durability

• For carcass parts using corrosion-resistant steel, which provides long-term warranty, in some cases.
• For an inner coating applied seamless material, laid in two layers. Between them is inserted monofilament mesh, which gives the material additional strength and reduces the risk of breaking through the web.
• When properly installed securely covered the metal parts from moisture, which eliminates the occurrence of corrosion processes.

all-season type pools do not require disassembly at the end of the hot season, they normally carry temperature changes, freezing and thawing of water, a small layer of which is recommended to leave tank.

Minuses

• The relative fragility and short life of frame pools.
• The lack of options for retrofitting the system to your liking.
• The unreliability of the pool edges. While the connecting pipes that keep wall look firmly rim is not designed for a large weight on the perimeter. It is advisable to protect it from stress and not rely on edge.
• Annual assembly and disassembly of the structure. You can not leave a seasonal outdoor swimming pool in the winter season.

This reduces the life of the product and may cause deformation and breakage of the carcass structure connecting portions, impaired strength material.

• Wear of the inner material. Real frost guarantees only a steel bracket.

For other species must take into account humidity, temperature fluctuations and other natural phenomena peculiar to the locality in which they are installed.

• Inefficient work of some of the filter pump. Cartridge filtration system is in fact not able to fully cope with the stated objectives of the cleaning.
• The control of water quality, and pH.

Removing the end of summer and the subsequent assembly of the spring badly affect the stability of the structure and lead to a loosening of the tubes at the joints. After two or three seasons skeleton loses stability.

How to choose

To select any frame pools to give preference, must take into account several factors:

• Dimensions of capacity and space dimensions, which for this purpose can be identified.
• How many people at the same time he has a fit that while it was spacious. One person is needed Q2 on average. m aqueous space, depending on the depth of the tank, this figure may vary.
• Exactly where it will be installed. Will the chosen place enough light to the crown of trees do not block access sunlight and do not hinder them to warm up the tank.
• To drain the used water. If during the operation used chemicals, it is not suitable for irrigation. In this case, you need access to sanitation.

The most durable and reliable pool is collapsible from a single sheet of steel which is held a special profile. Inside the installation is laid out bag inserts and special clips hooked up. This type has a maximum service life.

Given the fact that PVC frost on average is -15 degrees, and he prolonged exposure is contraindicated sunlight (possible loss of elasticity and strength) of the added dyes, ultraviolet absorbing radiation.

But this does not mean that the cup or package insert can not be damaged from the constant temperature changes.

What better frame pools

When you select should pay attention to the ribs. Than they are wider, the more stable the design. And improved bezel allows fearlessly lean on rim.

All other parameters are determined strictly individually according to personal preferences.

Filtration

Besides the two nozzles for inlet and discharge of water is usually complete skimmer. He draws a blade of grass, leaves and other debris deposited on the surface. In addition, it is better to choose hlorgenerator and filter pump sand type.

In the latter used sand grains size 0.4 - 0.8 mm, increasing the level of water treatment. The installation is fully automatic adjustment takes place by means of a timer, you only need to watch the pressure gauge that indicates the level of contamination of sand in the flask.

Operation of the frame pool

For maximum relaxation and comfort, we must remember the three necessary conditions at the installation:

• Pool is set on the sunny areas.
• Necessary smooth solid surface from which have been removed beforehand sharp metal, wood and other objects that may torn cup.
• Plot frame pool should be smooth, dense and hard ground.

The set comes with instruction manual with detailed information on installing and using the frame structure + video disc.

Features of operation:

• Small holes and leaks easily eliminated by adhesive patches and even without complete draining of the bowl.
• If the structure is mounted on a horizontal surface, the soil can not be sufficiently tight to hold stands, and they eventually sink into the ground.

To resolve this problem, you need to use a strong stand of timber or bricks to support not "drowned".

• Drainage of the tank is carried out using a garden hose and adapter to drain. Last connected to an external drain hole in the wall, then the safety valve opens and the liquid down.
• Before packing on storage of the cup it is necessary to dry.
• Turning Chashkov package, you need to try not to damage the fabric.
• Cartridge pump is also necessary to wipe, dry, disassemble and to apply a thin layer of petroleum jelly on all joints and seals.
• Carcass pool is stored in a dry environment with a temperature above zero.

installation

For any type of container it is recommended to prepare the soil to remove turf deepen pad or build platform of beams and planks.

If the pool is located on the ground surface, a portion of it is required to be calculated at least more than 0.5 m on each side. This space is necessary for arranging support rods, the possibilities of service and structure examination.

The base area should be in a dry place. Sifted sand for her, compacted and leveled. It is better to remove the upper 3-5 cm of soil, at the same time removing the plants, which can then grow and damage the bottom.

Set construction is necessary to open an elevated site away from trees. This is to the sun's rays warmed the water, raised surface structure guarded by stagnant pools under it, and the leaves and twigs do not contaminate the cup.

Water requires constant care and quality control.

Despite the established system, it needs to be cleaned periodically, filter, add special preparations disinfection, scrape plaque from the entire surface, and keep in mind when using aggressive precautions funds.

The presence of the filter does not exclude the ozonation and adding chemicals against bacteria, viruses and fungi.

Specify the maximum water should be close to the drinking, because it is constantly in contact with the skin, it gets in your eyes, mouth, and so on. D.

You can not swim if the water:

• opaque bottom poorly visible;
• unpleasant smells;
• colored greenish or grayish-brown hue.

To determine the quality and level of pH and chlorine, there are special preparations and equipment: tablets, strips, electronic tester.

Guarantee

The design - 1 season.

At the filtration plant - 1 year.

The average lifespan is 5-6 years. But with proper care and timely replacement of parts swimming pool can last up to 10 years.

The warranty does not cover improper use, transportation and storage.

malfunctions

• Frequent breakdowns frame pools are punctures or breaks the bowl. For these cases, repair kits are sold: a set of patches of different sizes and glue.
• If the film itself is worn, you can order a new package.
• Electric pumps and filters is better to give in specialized workshops.
• Virtually all parts of frame pools are replaceable and amenable to repair.

Manufacturers frame pools

Largest manufacturer of inflatable products for outdoor activities (swimming, hiking, scuba diving). It offers a wide selection of products for every taste and compares favorably with extraordinary rich color schemes.

Each product undergoes strict inspection for compliance with quality and safety of use.

The world-renowned company, the market leader in inflatable products for the holiday home and on the road. All products are higher quality control, strength, service and environmental friendliness. It is presented each year collection of a new product.

The company is a manufacturer of plastic products for recreation. Exporter in more than 50 countries. Various specifications of each new product tested internal laboratory.

The company is known ratio of the goods of high quality at a relatively low price, which is optimal for the buyer.