⚒ Wardrobe for a penny: how their own hands to build a storage system

click fraud protection

Secret successful interior - comfortable and functional furniture, which is perfect for your room in size. Buy this does not always work, especially if you need non-standard sizes. You can order the design of the master, but such work will cost very cheap. How to save money in this case? Everything is very simple: build your own closet. If you think that this is too difficult, you are mistaken. Direct proof of that - the experience of a fragile girl, a channel of the author mary Wood.

Wardrobe for a penny
Order cutting of sheets can be on any of the furniture workshop. The author had to spend time in the company's quest, which agrees to perform such work. This is not surprising as furniture makers prefer to independently carry out the whole process, not only take part of it

Material selection and preparation of details

Manufacture cabinet can be made of MDF or chipboard. Marie chose chipboard, with two types with one-color foil on the inside of the structure and with imitation wood facade. The inner part is almost not visible, so you can pick up any neutral color.

The only on what is not worth saving - so it's cut. Yourself exactly napilit detail so as not to damage the film coating is difficult, and the flaws are too visible. Decide on such can only be the happy owners of sawing machines.

The author has calculated once, on which side edge parts need, and what - no. She ordered the production of the edge in the studio, but you can make it, and with his own hands: it will only edge band and a hot iron. Therefore, if you decide to go into his savings to the end, think about this question. On the tape on one side an adhesive which, when heated firmly secures it to the end plate.

Not to scratch and not accidentally pierce through the details under which enclose the best bars, wrapped in a soft cloth. Chipboard is easily scratched, even sawdust, which will be on the floor
Not to scratch and not accidentally pierce through the details under which enclose the best bars, wrapped in a soft cloth. Chipboard is easily scratched, even sawdust, which will be on the floor

Before assembling the product, it is important to prepare all the holes for mounting.

Marie used a drill with a drill "Pyaterochka"
Marie used a drill with a drill "Pyaterochka"
To all the holes are even and placed at the right distance, the author acquired for furniture jig for drilling holes konfirmat. This tool is sold in different versions, including the area. There are such devices from 1400 to 2500 rubles, depending on the model
To all the holes are even and placed at the right distance, the author acquired for furniture jig for drilling holes konfirmat. This tool is sold in different versions, including the area. There are such devices from 1400 to 2500 rubles, depending on the model
Mary has chosen the simplest model, which is conveniently fixed on the ends. For alignment in horizontal planes additionally used building gon
Mary has chosen the simplest model, which is conveniently fixed on the ends. For alignment in horizontal planes additionally used building gon
The main thing in the self-construction of the closet - just adjusted size. Not to be trapped, it is important to carefully carry out measurements and properly prepare the drawing, taking into account all the connections
The main thing in the self-construction of the closet - just adjusted size. Not to be trapped, it is important to carefully carry out measurements and properly prepare the drawing, taking into account all the connections
Another essential tool for working with furniture - a template for internal and overhead loops. It should be a fixture around 300 rubles, and allows accurate counting
Another essential tool for working with furniture - a template for internal and overhead loops. It should be a fixture around 300 rubles, and allows accurate counting

assembly design: attention to detail

The author of this master class decided to collect the base of the cabinet on the floor in the room. Without a doubt, it is very convenient, as all parts can be positioned and secured in alone, unaided. But this solution has one important feature: if you are going to make the cabinet from floor to ceiling, you risk not to raise it later to the upright position. The fact clearance must be equal to the distance between opposite corners design.

Marie began to assemble the main perimeter, and then add interior partitions and shelf bases. For fastening used evrovinty. The rear side of the cabinet - fiberboard sheet laminated on one side. It is attached by small nails or screws
Marie began to assemble the main perimeter, and then add interior partitions and shelf bases. For fastening used evrovinty. The rear side of the cabinet - fiberboard sheet laminated on one side. It is attached by small nails or screws
Another device you want, without which it can not do - Forstner drill bit. It can help you make neat recesses for landing the loops. The cost of this drill - 400-600 rubles, depending on the diameter and the manufacturer
Another device you want, without which it can not do - Forstner drill bit. It can help you make neat recesses for landing the loops. The cost of this drill - 400-600 rubles, depending on the diameter and the manufacturer
Marie used traditional furniture hinges, the price of each of which is 25-30 rubles. For larger doors it used three loops on the fabric, for small - for two
Marie used traditional furniture hinges, the price of each of which is 25-30 rubles. For larger doors it used three loops on the fabric, for small - for two
Fixing loops already carried upright cabinet on small screws. It is important to adjust the loop after installation is correct, the doors were flat and tightly closed
Fixing loops already carried upright cabinet on small screws. It is important to adjust the loop after installation is correct, the doors were flat and tightly closed

For convenience, you can set the opening door handle or use, as a writer, magnetic mount, which allow you to open the door a slight push on them. The facade at the same time does not have any irregularities and looks whole cloth, it is now in the trend.

Wardrobe was very stylish. And most importantly - it is not Marie spent a total of 13 thousand rubles, it is taking into account the tools that can be more useful
Wardrobe was very stylish. And most importantly - it is not Marie spent a total of 13 thousand rubles, it is taking into account the tools that can be more useful

Exactly the same procedure, you can create any storage system, including built-in. As you can see, work is not so difficult, if you handle it even fragile girl. For convenience, you can additionally fitted wardrobes LED backlight and baskets for things.

Add to this master class on self-construction of the cabinet can be a little footage, which tells in detail about the possible Furniture fasteners:

We are waiting for your comments! Share your experience in the assembly of furniture, if you have one. And if you can show and photo process, the best materials will be required to be published under the heading "not a woman's business"!

Photo: YouTube-channel Mary Wood