TV does not see flash: causes and options for addressing

1. Plug the device into your computer or laptop.
2. Click its icon in the right-click "My Computer" and then the left - under the item "Format" menu.
3. Select the desired file system. What kind of - depending on model and specification television receiver, so consult in advance with the instruction. After selecting confirm formatting.

memory Limit

Some do not see the TV connected to them a large amount of storage. If a device designed to work with the stick capacity of 64 GB, the use of flash media size of 128 GB is not obtained.

Sometimes it helps to update the firmware or install its unofficial version. The first option requires referral to a specialist, and the second is only possible for the individual TV and leads to a loss of warranty. The optimal way - to use the carrier of smaller volume.

Purpose USB port

Not all USB-connectors are intended for normal users. The inscription «USB in service only» next to the port means that it is designed only for service purposes - to repair or install the software.

This is a small problem, because the equipment to the service USB-connector, as a rule, and has the usual. Moreover, they can be unlocked, but can do so only by professionals.

failure stick

If previously seen television media and the data on it, but at some point stopped - there is a possibility that the drive has failed. The reason for this may serve as a physical deterioration of the flash memory or controller failure, and file system problems.

Check the carrier can use the built-in Windows functions:

1. Insert the flash drive into a PC or laptop.
2. Go to the properties of the drive.
3. "Tools" tab in the window that opens.
4. Find it checks the disk and then run it by putting two ticks.

TV can not see files on a flash drive

It happens that the TV has successfully detects the flash drive, but its contents are for some reason not be displayed or played. There are several reasons.

conflict formats

There are many different video file formats. If the TV does not play video from a USB drive - a high probability that its format is not supported by the receiver. Clarify this point as possible in the instruction manual and on the website of the manufacturer.

You can convert files into the appropriate format through special programs. But the easiest way to download videos directly in the right format, because the ignorance of some nuances Conversion can degrade image quality or sound.

Better just to look for content that is suitable for viewing - for example, the extension of AVI reproduce almost all TV with USB-connectors.

name files

Another common reason that the TV does not read the contents - the file names. Make sure that they consisted only of alphanumeric characters - Cyrillic and special characters are not supported by many devices.

With this issue, connect the media to a PC or laptop and rename media files. After that, they will normally be opened and played.

other problems

The above recommendations can not help, if not defective USB-port of the TV or the drive itself. To check should try to connect to another TV USB flash drive and removable device itself to double-check on the computer.

If it turns out that the problem in the receiver box, it is necessary to contact the service center or private masters. In cases where the broken flash media often simply buy another, or replace the old warranty.

Before using a USB flash drive for playback on TV files, read the instructions to a television. This will avoid many problems. If the instruction does not help, you need to determine what is the reason - in the TV or the drive to act accordingly.