Appliances fail when you least expect it not. In order to efficiently repair the steam generators, it is necessary to identify the cause of the fault.
Manufacturers of different companies produce devices with similar design features. For example, steam from Tefal, Philips or Bosch comprise three key elements: the electronic control unit itself iron and the stand - also called station.
Complement the equipment different nozzles. For water heating boiler meets. Inside it is generated steam and flows through the hose in the iron. Openings in the base are passed steam, which smooths creases in the material.
The quality of smoothing does not depend on the size or material things. Simultaneous working with sensitive material, linen or jeans. Structurally, Steam Generating Station, for example, differ from Tefal irons stripping at such moments:
- larger size;
- evaporative separate reservoir;
- dry steam of 160 °;
- ironing clothes iron is not plane and ferry.
troubleshooting
Over time, the steam generator can not supply steam and this problem is not limited. Get the information about them will help survey. Diagnose the problem may be on such grounds:
- It does not regulate pressure;
- pairs improper temperature;
- difficulties with the heating of water;
- It does not turn off water level indicator;
- It does not enter the device voltage;
- water flow and so on.
On the listed symptoms should immediately respond, they immediately catch the eye. Such information will help to repair the steam generator by hand. To test the device, use the special equipment. With simple breakdowns can do a multimeter or a soldering iron.
Common Problems & Solutions
If the fault simple, can be removed without a service call. Necessary experience and skills repairing electrical appliances. You will found a list of problems and ways to repair.
- Lack of steam:
- Zoom system responsible for heating the water, an electromagnetic valve and fuse.
- Wipe parootvodnoy tube.
- Descaled water container.
- Install a new thermostat or hose, which serves for the inflow of steam to the iron.
- Look closely at the steam button if you need to replace it.
- Improper functioning of the pressure switch - toggle switch malfunction or microswitch. Multimeter diagnosed and solved by replacing parts.
- Do not respond to pressing a button on the control panel - damaged wiring. Make sure in its entirety. If everything is normal, replace the button.
- A blinking light at a low water level - malfunction fluid volume sensor. Replace the part and bring back to normal water level.
- Low pressure steam from the holes on the underside of the iron. Replace the controller if it is defective.
Dismantling of the steam generator Philips
Before repair, disassemble the unit. Not all users are versed in the operation. It helps in this step by step guide.
Before the repair of steam generator Philips, make sure that you have everything you need for this. It needs a "star" Screwdriver, Phillips and flat. As an example, gc9220 model. We offer a sequence of actions:
- Disconnect unit from the power source. Unplug the power cord to avoid electric shock.
- Remove the protective gum flat screwdriver. They are on top of the steam station. Loosen the screws Phillips screwdriver.
- Screwdriver "star", unscrew the bolts holding the main body portion. They are located at the bottom.
- Phillips screwdriver, remove the screws from the top cover to remove it. You can begin to repair.
Likewise disassembled and Tefal device. Devices like structure. You need the same set of tools and procedures.
conclusion
Self Repair considered faulty steam holders appliances in the first place. To this solution approach is reasonable and act on the clear instructions. If you do not have experience in dealing with electrical appliances, better entrust the work to professionals.