Samsung washing machines are popular among buyers. But any technique detects a problem. For example, the device gives an error on the display 4e at the beginning or during the washing rinsing. To find the cause, usually seek the help of the wizard. However, you can remove it yourself.
Error 4e in the washing machine Samsung is a problem with a set of water. If not gaining stiralka liquid for 2 minutes from the start of the run or does not reach the required amount for 10 minutes, then it gives notification mechanism and the process stops.
The problem is easy to identify: through the glass hatch will not be visible flow of water into the drum. without display model signal fault lights up in the temperature indicators.
Triggered alarm mode, rinse and spin speed. The problem may be due to:
- malfunction or absence of water aqueduct;
- breakage of the valve of the bay, it can get stuck foreign object;
- mistake in connecting hoses hot and cold water;
- the lack of water pressure at the tap;
- Improper connection of the hose with the technique.
How to find the source of errors
Most often, the code 4th or 1st appears on the display panel when you run the washing machine. If the washing machine Samsung error occurred 4e, that is no reason to make repairs.
The source of the error could be the lack of water supply. If the tap is closed, the liquid in the washing machine will not come. If tap water is, but it does not use the machine: check the adapter tap and the water supply valve to the flow.
If there is no pressure, check the water supply hose.
In some models of Samsung red sensor connection to the water supply points to the need to clean or replace the hose. Worked an extra lock. The cause of failure can be clogged filter filler.
If a clear indicator:
- Disconnect the device from the network.
- Close the water tap.
- Disconnect the hose from the tap.
- Drain the water into the hose.
If the hose is to leak problem with the water supply. In this case call the plumber.
Error in 4th stiralka Samsung occurs due to faulty electronics. To eliminate the malfunction, unplug the machine for 15 minutes and then restart the system.
How to remove yourself
Most often 4e code indicates blockages mesh filler filter. To troubleshoot Samsung washing machine with his own hands:
- Close the water tap.
- Disconnect the hose from the rear surface and zakuporte.
- Remove the filter and clean, clearing the thread outside and inside.
- Install the filter in the hose and tighten the fasteners.
Check the loops, and contact fields at the inlet valve. The valve allows flow of water. Cables and contacts with time passing, or oxidized. Strip contact with a soldering iron, and provide them to their original position.
If the issue continues to stiralka 4e code, contact the webmaster. Timely treatment will reduce the risk of serious damage.
Errors 4e and e4
Owners of washing machines Samsung should distinguish between errors program 4e and e4. e4 code occurs during the spin cycle and is a violation of drum balancing. The reasons for failure:
- too large or lightweight linen;
- fault in electronics;
- defects in the drive details in the belts or bearings.
At error e4 and 4e different reasons for the occurrence. 4e code indicates a failure in the fluid set, and e4 - during the spin cycle. To resolve this problem, make sure of serviceability of water and check the water supply hose. Before you unplug the device diagnostics.
