How to connect the soundbar to the TV via HDMI and wirelessly

Over time, the standard sound TV starts to seem poor quality, so many people want to improve it. In this case, the aid comes soundbar. It is a compact audio equipment with a minimum number of wires. When buying it should also be aware of mounting options and how to connect the soundbar to the TV, so that it does not cause trouble in operation.

location

Add sound bar can be next to the TV - to put on a stand or hang on the wall. In addition, if the room has a fireplace, it can be put on the mantelpiece. The main thing to take into account the distance between the TV and soundbar technology - it should not be too large.

Not immediately determine the need for adding additional speakers to highlight the place for them.

Front of the TV

Sound system can be put on a stand or shelf near the TV. This option is the most simple, but at the expense of such an arrangement the sound will go directly from the images. This method is ideal for small TV device owners, next to which freely fit the panel. In this case, make sure that it does not obscure the screen.

On the wall

If the TV hanging on the wall, and then mount the soundbar should be there as well. It is advisable to mount both devices simultaneously. Speaking of that, how to hang audio equipment is worth noting that for this bundled with the device often go wall fasteners.

Installation sequence:

1. Lean bracket to a vertical surface and fasten it with screws. When you install the soundbar at hand TV on the bracket must be exactly in the center of the TV.
2. Dock screw holders with the necessary holes on the side panel and secure.
3. Set the soundbar into the connectors and check the location of the studs - they should be at the bottom connectors.

The panel should hang at a distance not less than 10 cm from the TV. This is required for easy wiring.

connection

There are several ways to connect an audio system to your TV, which depend on the type of the selected panel - wire via HDMI, analog, coaxial or optical input or wirelessly by Bluetooth.

via HDMI

In this process, it is important to first check the support Audio Return Channel technology equipment, which is called HDMI ARC - Audio Return Channel. It is necessary that the sound signal from the TV displayed on an soundbar.

For such a connection after connecting the cable to the audio settings you need to choose a TV transmission of sound through external speakers instead of the internal speakers.

Connection via HDMI convenient that control the volume of sound panels could be via remote control from a TV.

Optical or coaxial input

If the technology does not have HDMI connectors, connect the soundbar to the TV, you can via the digital audio interface. Optical and coaxial inputs have priority of most audio systems. In addition, the cable through these interfaces can also connect a game console.

Here, after connecting the power cord to the TV's settings, you need to perform the same action as the last option.

The main advantage of the method - Support for 5.1-channel surround sound. When all possible sound sources connected to the TV, the audio signal is transmitted via the specified interface to the soundbar. But it is necessary to take into account the negative moment, which is associated with the lack of HD support.

analog connector

This method should be considered as an alternative in the absence of other opportunities, because the sound will not be multi-channel, so do not look for its high quality. Analog connectors are made in the form of RCA jacks red and white colors.

The only caveat - to connect the soundbar to the TV will turn only through an adapter with RCA to mini-jack. This is explained in the audio jack panels - standard connector the diameter is 3.5 mm.

Wireless

In the presence of the built-in Bluetooth receiver will connect the soundbar can do without wires. Support for such a connection is already in almost all soundbar even mid-priced segment.

Wireless audio transmission is possible from the TV, phone, tablet, laptop. Complexity is correct pairing devices together.

Since this type of connection for the inexperienced user is not the easiest, you can use NFC technology. It's enough to bring a plug-in gadget to the desired point on the soundbar housing, which is denoted by special symbols.

recommendations

Adjusting the sound bar in the room, it is necessary to adhere to basic guidelines that will help to avoid problems and extend its work:

• Hide the cables away from children.
• After the installation is best to double-check the strength fasteners.
• Do not place the panel in the area where an increased level of humidity.
• The bracket should be fixed on a smooth surface.
• Connect the connectors only after checking the safety regulations that due to negligence are not affected at once both devices.

For surround sound is to choose the model to which you can connect a separate subwoofer. Here, the connection can also be wired or wireless.

Soundbar popular due to the ease of setup and use. Premium equipment can replace a home theater. A more simple panel will improve the sound quality for watching movies and listening to music. Therefore, the selection and installation of a specific model should be approached carefully.