How to choose a built-in refrigerator Side By Side

Refrigerator need to preserve freshness products for a long time. The owners of small apartments to choose single- compact models. But for large kitchens built-in refrigerator Side-by-Side will be a godsend. It holds a lot of products due to large offices and is equipped with a set of additional functions.

This refrigeration system is suitable for families, where food is cooked in large volumes. A roomy freezer will help to make stocks of summer food before winter.

"Side by side" - as translated from the English name of the «side-by-side». At the two-door refrigerators most of freezer and refrigerator compartment are located separately on the left and the right. This design is more convenient to the usual bottom of the freezer and the refrigerator top.

In the apparatus the heat exchanger is not mounted on the back wall and the bottom. As a result, the device can be installed in a cabinet or close to the wall pododvigat.

Built-in refrigerators are suitable for any interior, because you can pick up any exterior trim. A large refrigeration units that can be built into furniture save space.

Also, there are different options for installation - Retrofitting partial or complete. In the first method, the technique put in the recess, and the door does not hide the elements of kitchen units. In the second unit is completely concealed behind a cupboard.

Built Side By Side Refrigerator

When properly installed, the location of the device within the furniture does not affect its performance and functionality.

Dimensions

Two-door refrigerators even with the embedded location is quite large. Therefore, before buying carefully measure the space and plan the alignment device in the kitchen.

Equipment height may be between 170 to 220 cm. Width - from 80 to 180 cm. The depth of the devices are from 60 to 95 cm.

Capacity

Important dimensions include the useful volume of the refrigerator. In two-door models of the total amount can be from 300 to 800 liters. When choosing important to consider the number of family members and how many products are usually stored in the refrigerator.

zone

Most often hinged doors, one of which opens to the right and the other to the left, share the freezing and refrigerating zones. Inside compartments can adjust the height of the shelves. Also in offices is marked with the recommendations for the storage of different food - raw meat, fish, perishable products.

Humidity control and autonomous temperature control to create a climate in which the products stay fresh longer.

compartments dividing the zones:

  1. Natural Fresh. Here, the temperature is constantly kept at 0.
  2. Super Drawer. Area for storage of fruits, vegetables and herbs.
  3. Mini Bar. For easy placement of beverages in bottles.
  4. Fresh Zone. Zone perishables.

These zones affect the price of the device, so think through which of them are going to use and what not.

Freezer

Freezer arranged on the same principles as the refrigeration compartment. Some models have an ice machine and drinking water supply, but in this case, the device must be connected to the water supply and to install special filters.

Location of the freezer compartment can be vertical - left or right, and horizontal - bottom.

Functional

Popular models work with energy savings, reduced noise level and serves alarm if the door is not closed. These opportunities demonstrate the reliability of the device.

Among the additional features can be:

  • mini bar;
  • remover of odors;
  • antibacterial protection;
  • Touchpad;
  • infrared light to destroy harmful bacteria.

The doors are fitted with limiters position and locks to protect against physical damage.

pros

At the bottom of the housing is installed heat exchange system whereby the device can move up close to the wall or to the rear wall of the cabinet. Receive up is designed to store food for a large family.

In addition, the following advantages:

  • no noise;
  • wide selection;
  • Additional energy savings due to thermal insulation.

Built-in equipment is great for preserving a unified style in the kitchen.

Minuses

Such additional options like the accelerated cooling, the ice maker and other substantially increase cost of the device and lead to increased consumption of light.

It also disadvantages failure to install in a small room - to place the two-folding built-in refrigerator must be at least 10 square meters. meters of floor space.

Kinds

The most common model - wide refrigeration systems with vertical divisions, one of which is the refrigerant, and a second freezer. Swinging doors are opened to opposite sides from each other. This type refrigerators called American.

Side by Side American style

In other devices European style division into two horizontal compartments. Located on top of cold room with two doors. It fits many products, since this compartment is bigger. A freezer is at the bottom with retractable shelves inside. This type is more compact, but not inferior to the spaciousness of the American version.

Side by Side of the European type

Among all the refrigerators Side-by-Side There are models with three or more doors. They are better to buy in the country houses, where purchases made once a week in the large quantities that often do not go to supermarkets.

The world's leading brands produce different line of built-in refrigerators at different purse and requirements.

Mounting

By selecting the dimensions of the device, it is necessary to decide the type of housing design: fully or partially embedded. Completely hidden behind facades of the model are considered standard and compact.

Attention is paid to the installation attachment types:

  • Runners. The doors open to the formation of a right angle: it prevents accidental deformation, but not too convenient, in terms of functionality.
  • Hinges. More secure fit with a wide angle of door opening. Here, the refrigerator cabinet door and fixed connected fastener, whereby the space is not going to dust and dirt therebetween.

We partially embedded device designer door, which does not need to hide behind the kitchen façade. Such models are more comfortable and roomy.

Installation Requirements

In order not to make a mistake during installation, which will void the warranty, it is best to turn to the master.

When self-installing, follow these recommendations:

  • save offsets from other kitchen appliances;
  • not install the refrigerator near an oven or other heat sources;
  • the bottom should be provided for ventilation grille;
  • to display the network cable in the closet need to make a hole;
  • double doors can outweigh for easy opening. they also do not have to be opened in the opposite direction - you can choose a one-way direction.

Large selection of built-in refrigerators Side-by-Side greatly reduced when it is picked up by design, type design and the option of opening the door. Two-door models are suitable for larger families and with them does not have to buy additional freezers.