A conventional vacuum cleaner is not enough for a full cleaning and carpet cleaning. Its application has always been seen as a preliminary step before the wet cleaning, which used to be performed manually.
Since the advent of washing models became possible to combine these two steps and do wet cleaning quick and easy. In this case, you need to know how to use a wet vacuum to fully realize the benefits of the household appliance.
Vacuum cleaners are not limited to basic functions. In addition to the dry and wet deep cleaning with detergent, some models are able to:
- clean and large debris;
- collecting fluid from the floor and other surfaces;
- clean from dirt tile, glass, linoleum, stone, furniture;
- perform hydration, flavoring premises;
- remove blockages tubs and sinks.
With these options, you can make a thorough cleaning. The most popular German washing vacuum cleaners, household appliances and Polish Thomas Zelmer.
Examples of multifunctional models:
- Thomas Twin Tiger filtration from wet dust provided with functions both wet and dry cleaning, the cleaning liquid.
- Zelmer 919.0 ST the same device feature set, which nozzle kit can work with soft, hairy, stone, marble, parquet surfaces.
Technical solution
The main disadvantage of conventional dust collectors - the emission of fine dust through the outlet, which is then deposited in the room. In this version of the detergent is eliminated by the presence of two chambers with clean and dirty water.
A first pressurized water is sprayed over the surface. In the second going to work together with the moisture dust and dirt. To improve the cleaning properties of the chamber with pure water added detergents. Typically, the manufacturer recommends detergents own making. For example:
- Thomas ProTex V recommended for water-resistant floor coverings, upholstery.
- thomas ProFloor designed for cleaning ceramics, PVC and other similar coatings.
Depending on the location of parts washing machines have a vertical or horizontal structure.
An example of an upright vacuum cleaner - Zelmer ZVC026XX. Horizontal layout mechanisms in Zelmer ZVC763HPRU with aquafiltering. Similar models also have a German producer Thomas - Vertical Thomas Prestige 20S Aquafilter, horizontal Thomas Twin Tiger. Both models have a water filtration.
Getting Started
Before the first use it is necessary to conduct an external inspection in the presence of faults, check your equipment. In their absence, you can start preparing for the operation. To do this, you need to disassemble the vacuum cleaner in the following sequence:
- Reach capacity.
- The tank for collecting clean water to pour dirt.
- On the recommendation of the manufacturer to add a cleaning solution.
After that, assemble the device in reverse order and connect attachments:
- Set to the desired tube nozzle.
- Connect it to a hose.
- Insert the hose into the corresponding slot on the chassis.
- Unwind the power cord, connect it to the network.
When working with a vacuum cleaner, which has a water filter also need to check the availability of pure modules Hepa check aquafiltering himself, and when using shampoo to add in a container with waste water defoamer and protection from splashing.
Cleaning
To achieve the most effective results, follow the recommendations that will make the establishment of order faster and more comfortable:
- To clean dry sand or other similar debris better use the dry cleaning using the nozzle with Turbo brush.
- Carpet cleaning is desirably carried out by successive movements of the up / down direction of the nap.
- Should start working with the farthest from the entrance angle, approaching the door.
- After primary treatment recommended repeated with clean water.
- It is possible to accelerate the drying of the cleaned surface using drying in the liquid collection mode.
Care after application
After completion of the cleaning device be sure to wash. Proper maintenance will ensure Dolni safety and efficiency, help to avoid the appearance inside the body odors and mold.
To do this:
- Disconnect the device from the network.
- Dismantle attachments.
- Open the lid, remove the container.
- Drain the rinse water.
- Rinse and dry reservoirs.
- Assemble the vacuum cleaner and storing it until the next harvest.
work especially
Most often in stores can be found washing vacuum cleaners Zelmer from Thomas. In all such devices have aquafiltering that securely hold the fine dust inside, mixing it with water.
Thomas
In some German models is a wet filtering system with an injector, which includes a water filter module, it belongs to the porous member and the suction akvaraspylitelya cube.
Before wet cleaning akvafiltratsii system must be brought into the working position. For this:
- in the main compartment to insert container for collecting dirty water;
- install a water filter, holding the lid;
- install the unit with the porous member and the suction cube;
- pour into a dirt collection capacity of the pure water.
Also, ensure that the spray is functioning.
After cleaning Thomas filtration system must be dismantled. Filter elements, injection tank should be washed and dried. Work compartment thoroughly with dry cloth and to clean the dirt cover.
Zelmer
Before vacuuming this manufacturer require a special training module filter device:
- a dust collecting chamber need to install a partition which blinds should be directed downwards;
- further necessary to pour water into the container;
- at the end of training will establish itself wet cleaning module.
After working with a barrier filter to be removed, washed, dried and set in place. After 30 hours water Zelmer filter needs replacement.
Design complexity Thomas apparatus equipped with a water filter, takes time to post-harvest services. This approach makes cleaning more thoroughly. When choosing a model, consider this option.
