With the advent of washing machine, and there was more free time. Though washing takes place automatically, sometimes you have to take part in its work. Since any equipment eventually fails, it is necessary to independently drain the water from the washing machine.
For all washing machines have 5 options to get rid of the water. To do this, unplug the machine from the network, shut off the water supply, prepare dishes and a few rags. To drain the water from the washing machine, it is necessary to use several parts of its structure.
drain hose
Drain with a hose is considered to be convenient and fast. For this purpose, separate it from the device behind the machine and from the rear panel. Unplug it from the sewer and lower all the way down into the tank to drain. If the hose from the washing machine has a loop, not to create a leak, look for the description in the instructions to the model.
Emergency drain hose
Some machines have an emergency drain near the filter. For decorative panel at the bottom there is a small tube, like a hose. Drain the water in this way is not quickly get out of the fact that the tube is narrow. Open the door, behind which is a hose. Release it from the protective cap and tube direct into the prepared container.
drain filter
Washing machine provided a filter that protects the drain pump from getting small items. According to the standard access to it at the bottom under the access panel. To empty the machine of the fluid acting on the instructions.
Open or remove access panel flat screwdriver or a knife. Car tilt to the side or lean against a wall to drive the container to drain.
Standing at his side, the machine can move.
Rotate the handle counter-clockwise, without twisting until the end. Part of the water is on the floor, so will need a lot of rags.
Open the hatch directly
If neither way is not triggered, manually drained from the machine can be automatic through a hatch. To do this, open the door of the washing machine and draw water by hand. If the water level stands at half of the drum, tilt the rear wall, so that it is not poured out at his feet. Open the door and select the water any materials at hand.
This method is most uncomfortable, long and less effective. But damage may not be possible to open it even if the network connection. You have to use a delicate lace. Having passed between the body and the door, pull the two ends and the lock opens.
drain connection
If the filter at the time of breakage was clogged or do not remove, the water can not get out of the machine. We'll have to disassemble a washing machine. By removing the rear panel of the machine, a pipe and place the container dry cloth, remove the pump and the nozzle connector.
Disconnect the pipe. If the water is not flowed to gently clean the hole. This manual method will completely remove the water.
Event of a breakdown, under which alone will not cope and repair must be called masters. Pump can burn or break fee.
Especially plum popular brands
Stamps stiralok differ in functionality. Forced draining of water from the method are specified in each of the instructions.
Consider some of the models:
- The Bosch sensor notifies the machine that water can not be downloaded from the tank. If the car can hear buzzing or crackling, the pump is broken. Such problems create small objects from pockets of things.
- On machines Ardo is constantly having problems with drainage water. Before calling the wizard to remove the water.
- LG has a convenient auto-spin. Press the "Power" switch on the spin "Without spin" mode, and "Start". Water will drain automatically.
- Machine Indesit and Samsung even easier to resolve the problem. Use emergency water discharge or the program "Drain only". The drum is purged of water and it will be possible to open the door.
- Mark Zannusi has water drainage program of the washing machine. In the instructions it is called "washing of fabrics of synthetic" or "Delicate wash." When the wash cycle is stopped, the water remains in the drum and water works pumping mode.
- Automatic machines brands Candy, Akvaltis, Beko, Electrolux and Ariston also have a small objects clogging problem. Water can remain in the technique due to brush wear, which will eventually need to be changed.
After the adoption of measures to address the garbage and cleaning the machine from the water, start the test mode. If the cycle is not turned on, leave the matter specialist. If the failure cause is unknown, the work of the device without removing it may damage equipment and add on a fix cost.
