Extractor hood to work properly, it is necessary to carry out its cleaning time. If this is not done, the technique will not be able to clean the air effectively. In addition, the appearance will also be spoiled by accumulated dirt. Therefore it is necessary to know the rules of how to clean the hood of the fat, to avoid strong pollution.
To how to more thoroughly clean the cooker hood in the kitchen, check the manual for the device, which of the removable parts. Usually you can remove grease strainer. And the rest of the filters, as a rule, are disposable cassettes, which must be replaced by new ones as wear and tear.
Many models have filters filling indicator, which is convenient for timely replacement. Coal cartridge needs to be changed 3-4 times per year. About the same time you need to wash the filters removable type.
Before you clean the hood, look in the manual how to remove the filter grille. First you need to remove all removable parts and then start cleaning the machine. For this:
- Unplug the appliance.
- Remove the strainer.
- If coal is time to change the tape, remove them and replace.
- If the duct can be removed - dismantle it.
- All fasteners fold in one place.
Now you need to choose a method of cleaning the instrument. This can be done in ways - manually or using household appliances.
methods of cleaning
Available options on how to clean the hood from fat:
- steam generator;
- wash parts in the dishwasher;
- manually.
With household appliances
The simplest methods - the use of other special equipment for purification.
steam generator
Clean the exhaust apparatus of the fat with a steam generator is very easy. This apparatus qualitatively cleans surfaces without any chemicals. He works on the subject of hot steam, which dissolves grease and other contaminants. After treatment, the steam generator parts hood will shine.
Besides surface disinfected with such a method, since hot steam kills all germs.
The dishwasher
Removable filter grille can be washed in the dishwasher. But before that, make sure that the manufacturer allows to wash these parts in the dishwasher. If it is permissible to add the removable parts in the lower rack of the dishwasher and select the desired mode. When the elements are heavily polluted - set mode soaking or intense.
Manually
If you can not apply the technique, there are several other options for how to clean the cooker hood from the fat by hand. For the manual method, you can use special cleaners or folk ways. Cleaning of grease sold in any hardware store. By folk remedies for cleaning exhaust equipment include:
- solution of baking soda;
- vinegar;
- laundry soap.
Select a convenient way and start cleaning with sponges, brushes and towels.
Chemistry
Filter mesh is easily washed by any means liposoluble:
- detergent powder;
- liquid soap;
- dishwashing liquid;
- purpose detergent.
When the filter mesh is very dirty, soak it better. To do this, take a wide capacity and pour hot water so that when it completely covers the soaking part. Then pour the detergent composition, mix well. Place the removable part of the device in the solution for 20-30 minutes. After that, rub the sponge until the complete removal of fat.
If any contamination left on the surfaces - repeat the operation.
Soda
Clean the filter of the cooker hood from the fat you can use normal soda. It is well removes dirt and grease from all materials. To do this, apply a little baking soda on a damp sponge, rub the contaminated sites. If accumulations of fat are strong, so leave them for 10-15 minutes, then clean the item again.
Vinegar
Clean exhaust device and its parts can be made removable by means of vinegar. Make a solution of vinegar with water in a ratio of 1: 1 and lower the filtration grating therein. Vinegar is good eats away the dirt from the fats. Furthermore, it disinfects the surface. When interacting with the substance necessary to comply with the rule - use gloves.
After soaking the elements of the device should be wiped with a brush to eliminate grease. They are well cleaned, even if heavily contaminated. Then wash the item under running water and put to dry. To remove corrosive fumes of vinegar, ventilate the room.
Laundry soap
The hood can be washed even with soap. Rub a little soap on a grater in warm water and wait until it dissolves. Then put the filter back on for 20-30 minutes.
Also soap can rub the filter net and also send it to soak in hot water. After soaking, rinse off any means of warm water and dry the item.
cleaning the cabinet
After cleaning, removable parts should be washed myself hood body. The methods are the same as used for the details. You can use all the facilities, with one exception.
Not suitable for cleaning the exterior surfaces extracts abrasives and rigid sponge brushes. They will scratch the smooth panel than spoil the external appearance of the device.
Only use liquid detergent and soft sponges. For this reason, better to renounce the use of soda for cleaning the bodyBecause she, too, can leave scratches.
Apply a cleaning cloth means for smooth surfaces or liquid soap. Treat any contaminated areas outside and inside the hood. Then wipe towel panels dipped in pure water. Allow to dry surfaces, parts of the unit. Then install the removable part of the back.
Clean the cooker hood in the kitchen as it is pollution. It depends on the frequency of use of the device. On average, care is required to produce one every three months, but he may need and more. Keep track of the filter clean, in order not to have to fight hard to remove impurities.
