As clear from Thermo scale citric acid, vinegar

Thermo - universal device that facilitates farm kitchen. Device for heating and boiling the water storage. As with any technology, it can form a scum. To clean the Thermo from scale and get it back into working condition, use our advice.

Non-distilled water from the tap contains harmful trace elements that affect the surface Thermo. When heated, the chemical elements are converted into carbon dioxide, leaving the lime in the device walls.

If not get rid of it, the raid brighten and spread to the heating disk. lime particles can get into the cup. Device with scale is harmful to health and soon will break.

Means for descaling

There are many effective ways to remove plaque. You can buy special chemicals, for example descaler. Detergents and ordinary soaps, ascorbic acid, and other available materials are effective in fighting plaque.

If you do not know how to remove scale in frozen Thermo, read our tips.

purchased funds

Special tools to remove plaque. The chemical composition can affect human health. Use them carefully:

  • Pour into water appliance add detergent ;.
  • boil and drain;
  • rinse device twice that chemicals do not fall into the water.

Disadvantage of this method is that you do not know whether it was possible to clean it completely from the rest of chemistry. Try home-removing plaque. It is much cheaper and safer.

Soda and citric acid

The original and the budgetary method. Citric acid has long been considered a means of anti-scale. Just add water into a thermos bag and add citric acid per liter of water. After 4 chasa drain and rinse Thermo. So you remove limescale and get rid of the odor.

Soda copes worse, but also safe for health. It removes spots and stains, but not the first time. I have to wash the thermo-makers twice. Remove the cover and place the fill water a spoonful of soda per liter. Drain and repeat.

Vinegar and water

Take an 8% vinegar to mix with water. To clean the walls and the inner disk dissolve tablespoon acid per liter of water, leave for 3 hour and then drain the water. Boil the device again. A second wash unit to eliminate odor.

Important! For greater effect, you can use the combined method: it will help to remove plaque from all surfaces of the unit. Put in Thermo ash. Leave on for half an hour and boil. Add citric acid and leave for another half hour. Put the vinegar and boil thermos last time.

Carbonated drinks

It is proved that soda removes plaque from the walls of the thermos. Take 1 liter of beverage "Coca-Cola" or "sprite", for example. Check this way pouring some liquid into the thermos and heating it to boiling.

Vitamin C

To properly clean the Thermo:

  • roll spoon ascorbic powder per liter of water;
  • boil the appliance and leave it for half an hour;
  • rinse the kettle with water and leave to dry.
Methods Methods to clean clean Thermo

Non-standard methods

Clean the thermos from the scale, you can use apple peel or potato. Make it simple: clean apple or chopped raw potatoes, put in a lot of device and boil. Then you can clean the kettle ordinary sponge. Such a method can not get rid of the scum from the first time, and in severe cases do not act at all. Use this method for prevention.

Terms of care device

  • If you decide to wash the device in everyday chemistry, boil the kettle to harmful substances do not get stuck on its walls.
  • Clean carefully so as not to damage the internal components of the device.
  • After vinegar twice boil thermos to eliminate odor.
  • Drain the water after each boiling.

helpful hints

If you properly care for your device, it will serve you for many years. Follow the few simple tips:

  • Check the inner surface at the dark stains and lime stains. The first appearance of plaque Thermo Wash and leave to dry.
  • If along with the water in the mouth enter the fine particles, check the status of the unit and clean the heating drive along with the walls.

Many ways to clean - is to choose the correct one. If the scale much better to entrust the cleaning detergent. In other cases, you can save and manage materials at hand. Perform preventive maintenance once a month. Clean the instrument and it will last a long time.