💡 Chandelier own hands: Installation and decor

Manufacturing design masterpiece - a fun and creative process. For example, home-made fixtures can drastically change any room. In this review HouseShief edition we will discuss how to create a gorgeous chandelier with his hands.

Chandelier own hands: installation features

Chandelier is a detail, without which the interior of the kitchen would lose its charm. Often the question arises, how to make your own chandelier. Any difficulties when it is not, but certain fundamentals you need to know. Unique design requires a solid foundation. To understand what a chandelier optimally fit into the interior, it is necessary to navigate the design and its features.

The choice of material for the manufacture of chandeliers

Independently chandelier can be made from various materials suitable for this purpose:

• paper;
• thread;
• CD;
• bottles;
• cardboard;
• wood and other

In addition, the product must conform to the interior. Taking into account the dimensions of space and ceiling height.

It is recommended to use materials that do not contain toxins, as their selection may occur during heating.

plafond

Before starting work, should determine the type of material. Most Popular:

1. Paper. Simple and affordable material, well transformed.
2. thread. They have an unusual appearance, do not require significant costs, since it is possible to use materials at hand.
3. Textile. It looks nice, as there are a lot of textures, colors. Therefore, you can create different designs.
4. Glass. It looks original, well cleaned from dust, dirt. Over time it does not lose brightness.
5. Plastic. Easily created to produce unusual design, you do not need to spend a considerable amount. Easy to clean, perfectly softens the light.
6. Metal. Excellent strength and durability. Well it reflects the light.

1 of 6

Accessories for chandeliers

To make the product quickly, initially preparing the required materials:

• Twine from flax or jute;
• PVA glue;
• inflatable balloons made of latex.

To build and connect the electrical part of the need:

• lamps;
• chuck ring;
• cord with plug and switch;
• copper wire;
• terminals;
• brackets of plastic.

How to make a chandelier with his own hands

Experts believe that to make a chandelier can independently each. Following the instructions, you can quickly create original lamp. Materials needed:

• Cable ammunition for light bulbs;
• insulation;
• glue gun;
• materials to decorate the ceiling;
• scissors and other additional tools.

Chandelier made of crystal

One type of crystal glasses is considered optimally suitable for classical interior. The material is much more expensive than normal glass, but is also fragile. In order to build the product:

1. Cut the fishing line and attached to the lampshade. With the fishing line construction suspended on the prepared place.
2. Cut wire to fix the glasses. Only one small piece of the product 1.
3. Carefully wrapping and firmly tightening wire glasses fixed on the ceiling.
4. Screwed lamp, and the light is turned on.

Chandelier made of wood

To make a chandelier made of wood, you need the ability to work with such material. You will need:

• directly to the tree itself;
• LED Strip Light;
• jigsaw;
• epoxy resin;
• the wire.

collection algorithm:

• cut timber measuring 10 × 10 × 10 cm³, wherein a groove must be made for a tape using a jigsaw;
• connects tape, and the groove is filled with the resin and drying;
• when the adhesive is dried out, it is required to handle the lamp with the help of emery.

Chandelier of butterflies

Such a lamp is combined with various interior styles. He is suitable for the living room, dining room or children's rooms. collection algorithm:

1. Take an old chandelier or its frame. When such material is absent, the thick wire, with which is performed the coil 2-3 to left circle.
2. Butterfly cut according to a pattern.
3. Starts monofilament thread or fishing line, via which the attached butterfly (planted or are strung on the glue).

Production chandeliers with additional functional

Most of the fixtures, in addition to traditional functions have improved performance significantly extend the capabilities of the user. Extremely comfortable to use of the product with an integrated dimmer. They set up the default coverage, and in the presence of LED products run light color.

The remote control that comes in the kit, makes it possible to turn off the light without getting out of bed. Producing lamps with integrated sensors that operate on specific sounds.

Chandelier with fan

Lamp with Fan is quite easy to make yourself. But to create such a masterpiece, it will take the motor and impeller, excluding wires, fixtures and others. It is possible to use the old engine stiralki, however with poor attachment, such a device can cause injuries.

Chandelier Chizhevskogo own hands

Such a device is quite simple, in view of which the assembly will not create significant problems. The article includes a chandelier and the power supply.

The effectiveness will be ensured, first of all, the design of the chandelier. To make it your own hands, you will need a regular gymnastic circle. On it should lend a network of wires of copper with a diameter of 0.5-1 mm, a cell size equal to approximately 3.5-4.5 cm. The network is established with little slack. The network nodes are soldered needle length of about 5 cm and a diameter of 0.5 mm.

Independent production of chandeliers in different rooms of the house

To create a ceiling lamp on their own, should take into account the interior premises. It should determine the dimensions and technical parameters of the chandelier.

For kitchens and bathrooms suitable for small models made of plastic or glass, for bedrooms and children - from paper, fabric or glass for the hall - from metal.

When selecting the material, it is required to prepare the tools. Then should follow the instructions, and then the assembly will not cause too much difficulty.

Chandelier for living room

When was the old cover can be made from it original chandeliers at low cost. collection algorithm:

• prepared from a metal frame, paint, garland with beads, several hooks;
• colored frame in a silver shade;
• When everything is dry, the frame is wrapped by a garland;
• hooks are attached to the base, connected to the bubble.

Originally in the living room will look products from the tissue. The sequence of these works:

• prepared old frame made of metal or thick wire to create a form of the lampshade;
• cut out fabric (length will depend on the preferences, the width - the diameter of the ceiling);
• the fabric is applied to the base, its upper part is sewn;
• when the fabric is light, then it becomes heavier bottom using cardboard, lines or lace;
• if desired, can be decorated with a product décor.

Chandelier in the bedroom with his hands

With a diversity of products and a large chandelier in the price range you can make a similar device with your hands. Suffice original design project is considered to ceiling fixture with butterflies. It is implemented as follows:

1. It is necessary to find an old chandelier or take a circle of metal, think about how it can be fixed on the ceiling.
2. Of paper according to the pattern of butterflies cut the required size.
3. On the line or yarn of nylon attached butterflies. They can be glued using an adhesive or a silicate strung. Length and frequency locations determined by the filaments at their discretion.

The chandelier in the child with his hands

Not all situations manages to select the ideal model chandeliers for children's rooms. Sometimes it is not suitable size, method of scattering rays, style, and even the cost. In such a case, it is necessary to resort to self-production of chandeliers. The process will not cause significant difficulties, require only a basic knowledge of electrical engineering and materials. Alternatively, it is possible to assemble the chandelier of the globe. The algorithm is as follows:

• Globe separated from the stand and cut along the equatorial line;
• prepared electric component - connecting cord and cartridge;
• inside the globe make holes where the cord exits;
• inserted a cord holder and a lamp inside the globe, displayed cord cutting line is sealed with tape;
• fixture attached to the ceiling, using previously prepared for this design.

This model of the luminaire is suitable for children's rooms for both boys and girls, it is important that the child is interested in geographical subjects.

Chandelier in the kitchen with his hands

During the selection of the lamp in the kitchen need to focus on the process of fixing. Most of the chandelier is secured by a loop attached to an armature. Frame in this situation should be as durable.

To create an original lamp, you can use wine bottles. Prepare such containers, glass cutter, sandpaper, chuck, wiring, metal frame and the rim of the timber. Then you need to follow this algorithm:

• is drawn on the bottom of the bottle line, then cut using a glass cutter;
• edge grind sandpaper;
• wire extends through the neck and connected to the chuck;
• design is fixed on the frame.

You can use several bottles, and then decorate them with decorative elements.

Chandelier Bathroom

Normally, the bathroom is small, because the optimum use Water resistant compact lamps. For producing such original device is required to prepare a bottle of plastic, plastic spoons, adhesive cartridge and a knife.

Assembling chandeliers:

1. Label removed, washed, dried bottle, cut off the bottom.
2. Cut off the handle with spoons.
3. A circle bottles glued "shovels". Glue is applied to a spoon which are pressed to the frame (convex portion on the outer side).
4. When the base is full, placed inside the cartridge is attached to the base.

Instead, you can use decorative covers bailers to be glued to the neck of the bottle.

How to decorate an old chandelier

When in the pantry there is an old chandelier made of metal, it can be restored. When the material is somewhat rusted or chipped paint, use alkyd enamel or acrylic. It should repaint the frame in any color at will to old product has received a new life.

How to install a makeshift chandelier

If a user ever installed a chandelier with his hands, then with the installation of improvised devices difficulties will not arise. When lacking the necessary skills required to become familiar with the recommendations.

How to Hang a chandelier

Any chandelier is attached to the ceiling in 2 ways. In the first case the product has a large mass, it is necessary to set the hook on the lamp. The plate punch a hole where he and walled. In another situation, use U-shaped or cross-arm. In this case, with the aid of metal spetsdyubeley mount bracket, which is fixed by means of a chandelier 2 or 4 screws.

How to connect the chandelier

To connect the wiring to the lamp, you should also adhere to a certain algorithm. Here there are only 3 wires, which must be connected to the wiring. Green or yellow is responsible for grounding. Once in the apartment it is absent, the wire can be insulated and not to focus on it attention. 2 other wires - phase and zero, which are connected to the respective wires.

Production original chandeliers own hands is a simple procedure. For these purposes, you can use almost any material. Before you create your own lamp, it is necessary to determine the key parameters: safety, appearance, practicality, operation duration.

If you liked our article, be sure to put the assessment. In addition, we are always happy to answer your questions, which you can leave in the feedback form.