Wall Chaser Concrete: rules of work with the equipment and review of popular models

Having bought apartment with a rough finishWe think with horror of how much work to be at first. Especially beginners scares process associated with the electricity wiring. In this case, the concrete wall chaser will become an indispensable tool. However, the "groove" in the home may be required to install the cable under washing machine or plate, Pipeline construction and other hidden communications inside the apartment. Features of work and choice of power is not always thoroughly known newcomers, which is why editors HouseChief.ru today decided to devote a detailed review of this particular topic.

What is the wall chaser - principle and device

Wall chaser, it is called "chasers" - a special power tool, which is used for striking in concrete, brick, Stone (such as from artificialAnd natural stones) and other surfaces of grooves of special certain width and depth. In fact, it BulgarianBut not a single disc, but two. Of course, if you want to Stroebe short distance, for example, from the junction box to the nearest sockets, Then come up and hand tools. However, in this case, the process will be slower in the three or even four times, which is totally unacceptable for large work volumes.

In contrast to conventional Bulgarian, Wall chaser is equipped with a special movable platform supporting the guide rollers (2 to 4 units), which allows adjustment of the furrow depth.

Parallel discs allow you to create a perfectly smooth furrow after a single pass, without the need to return to the beginning of covered area, with slits obtained strictly parallel.

Comment

Andrew Feofanov

recruitment specialist tool "VseInstrumenty.ru"

Ask a Question

«Wall chaser only creates a furrow, so the remaining material between the notches is removed manually. This can be done either a chisel or a chisel. "

As with many types of power tools, there are special guides and protective elements in the wall chaser design. There are certain mechanisms that are triggered:

1. In case of overheating or overloading.
2. When jamming discs.
3. When contamination of parts and elements.
4. As protection against accidental activation.

During operation chasers it allows you to use some of the unique, peculiar only to this device features: the depth and width of cut adjustment in manual or automatic mode, as well as frequency rotation. "Soft start" anti-vibration system and function.

Important! You must know that you can not cover every pipe or wire in Stroebe. Projections for any hidden communication should be carried out under the supervision of specialists. For example, smoking laid in Stroebe and close the gas pipes and water communications collected on threaded joints.

After switching on the device (most often they work from the outlet 220) launches the motor, which transfers the rotation of the gear unit. It accelerates the spindle, which carries the diamond discs.

Before starting work on the wall or other surface markings applied at which occurs propyl furrow. As a result, surfaces are two parallel lines, inside which will later is clean "groove". This can be done in the usual hammer or chisel.

types of Wall Chaser

Wall Chasers may be manual or electrical:

1. Hand tool, for example, hand and foamed by Wall Chasers aerated concrete are used in a soft and porous material such as Cbit and its analogs. In this case, such a tool will suffice. In this case, the groove depth is governed by the physical pressure on the device. Plus, such a tool - in its quiet and a little dusty work, and there is no need to use electricity.
2. Power tool used to work on more durable materials: concrete and reinforced concrete, masonry and other solid surfaces. In this case, the operation of the instrument is equipped with a number of difficulties: this is usually a dusty environment. Therefore, special filters or fasteners used in professional models under Wall Chaser vacuum cleaners. Master is better to think in advance of buying protection against dust - special glasses mask.

Comment

Andrew Feofanov

recruitment specialist tool "VseInstrumenty.ru"

Ask a Question

"The sale can be found angular Wall Chasers. They create holes of different shapes (e.g., concrete lintels, sills), whereas most Wall Chaser has a fixed angle relative to the work surface to be treated - 90 ° ».

Features and specifications

Before going to the store power tools, it is important to decide on the tasks that you will deal with it. To do this, it is important to know what are the technical characteristics of the device has. Editorial HouseChief.ru decided to simplify the task and ready to tell about the peculiarities of the most important of them are your readers.

Power

Wall Chaser separated three kinds of power: low power (Appliance, from 1 to 1.5 kW), the average power - 1.2-2 kW and professional (2 to 3 kW). Of course, low-power tool will bring a lot of problems, especially if it is picked up incorrectly. If you are considering a serious technique, it is worth paying attention to the chasers 2 kW. Such wall chaser tool is classified as the average performance and allows to perform work on hard coatings.

The weight

Remember, the greater the weight of the product, the greater its power. professional equipment weight is usually higher than 6 kg. The most simple household model will weigh between 3 kg. Moreover, the difference in weight models may vary in the range of 1 kg.

Rotational speed

This indicator is directly proportional to the power of the device. For the most common bricks and interfloor plates typically selected model output power of 2.5 kW. The rate of revolutions per minute may be from 7000 to 9000. For cutting thicker materials (metal, concrete and so on) is used more powerful Wall Chasers with rotation speed of 12 000 revolutions per minute.

The width and depth of cut

As we have already noted earlier, both of these options are changeable. In some models, mechanical, in others - hardware.

And, as we have noticed earlier, this figure can be changed using special nuts, which are wound onto the spindle between the discs.

Important! In many models of professional chasers provided dust suction system. And you can connect as a vacuum cleaner and a special industrial filters. Hand Wall Chasers such systems do not have, so a huge amount of dust is formed when shtroblenie them.

Cutting depth can also be adjusted. It depends on the position of the moving parts of the tool and vary the position of the disc relative to the handle. The hand-held wall chaser, which are used mainly in the relatively soft materials, cutting depth depends on the pressure exerted on the tool man.

The diameter of the disc

It is due to the speed some masters want to catch up on the missing power. It is believed that the larger the drive, the more cutting width. However, should be weighed against the power tool and the diameter of the consumable material. Otherwise, you will increase the weight of the device, but do not choose to return.

Ergonomics

To select a tool to complete the work do not forget about how convenient wall chaser "lies" in his hand. It so happens that a sufficiently heavy machine compensates for the weight comfortable handle or a shoulder stand. For example, if the instrument is equipped with rubber grips, hold it will be easier, and work process will take place without too much stress in their hands.

Types of tools and options for additional equipment

Power tools of this class is a type dangerous to use. That is why almost all manufacturers supply model chasers protective elements and Sleep functions. In case of overheating the system turns off the tool down until cool. Moreover, the equipment is provided with a protective sleeve that eliminates jamming of the cutting disks, as well as additional filters for protection against dust.

Manufacturers are working and working to minimize not only the amount of dust created by the tool, but also the noise level. There are soft-start button and also minimize vibration system. In addition, there are systems enhance smoothness, design Wall Chaser equipped with such functions include slip clutches and shock absorbers to reduce the lateral runout.

How to choose the right wall chaser - recommendations HouseChief.ru edition

In our view, the right decision - to choose the wall chaser, starting from specific problems. For example, based on the maximum allowable width of the furrow. In this case, for laying cables will be quite thin groove width of 20 mm. And if you want to hide the plumbing communication, in this case, consider a tool capable proshtrobit well in 60 mm.

For domestic use suitable apparatus with low power - up to 1.5 kW. However, remember that a lot of work with him, you will not be able to do fast. The motor will continue to overheat and stall.

Tip! If serious work, but the nature of her one-time, then we can consider renting a wall chaser for concrete with a vacuum cleaner. This investment can be considered cost-effective. The price for this type of service is low. A job with a good professional tool will bring additional bonuses - no dust.

If you pick up a tool for professional work, do not rush to treat the most powerful. The weight of such products in some cases has negative sides. middle-class equipment (1,4-2 kW) allows you to perform the main work without major delays and serious effort.

For work on concrete and very hard surfaces are used nozzles - or diamond abrasive wheels (or nozzles on grinder) Wall Chaser System diameter of 220 mm. These chasers are a class of professional and have a high price. In some cases it is necessary proshtrobit furrow depth of 10 mm and above. In this case, you can use the single-disc grinders or electric cars.

Top Wall Chaser System model based on feedback from experts and users

Most often in a professional environment is called following the foreign producers borozdodelnyh machinery: German firm «Bosch» and «Metabo», as well as the Japanese «Makita». Also popular Russian manufacturers Wall Chaser "Fiolent" and "Zubr". Consider the most popular models.

Wall chaser Makita SG1250

Comfortable and ergonomic, this tool allows you to handle most tasks: creating fissures in the stone, concrete and masonry. Suitable for wiring wiring, drainage systems and heating systems. Power - 1.4 kW. The housing is protected from dust, the unit itself is lightweight - only about 4 kg.

Review model Makita SG1250

Wall chaser Makita SG 1251J

When the average power is 1.4 kW it has quite a working speed - more than 10 000 revolutions per minute. The tool can cut a groove depth of 3 cm for concrete and brick. According to most users, the model copes with its functions, high quality and reliability.

Review model Makita SG1251J

Chasers Interskol Ohm 115-1300

The tool allows to vary the inclination angle at 45 to 90 °. When the average power of 1.35 kW wall chaser easily creates a furrow in 36 mm deep. The housing wall chaser equipped with special protective covers and well assembled.

Review model Interskol Ohm 115-1300

Wall chaser Phiolent B1-30

This appliance, which is good "eats" a brick, concrete and even metal. If necessary, it can be used as a grinder. The model makes it easy to adjust the size of the slot, connect the vacuum cleaner, and have shut-cooling function (built-in ventilation system is provided), the lock against accidental pressing. Among the drawbacks may be mentioned, only one - low power (1.1 kW).

Feedback on "Fiolent B1-30" model

Wall chaser Phiolent B3-40

It distinguishes robust design, excellent driving performance, high-speed performance with small dimensions. Cutting depth - 41 mm, copes well with brick, concrete liningIt can be used as a grinder. In the model, there is a ventilation cooling system, overheating protection, you can connect a vacuum cleaner. And the availability of interchangeable parts allows us to assign it to one of the most convenient and reliable tools.

Feedback on "Fiolent B3-40" model

Wall chaser Phiolent B2-30

It allows you to change the angle of the slope. It feels great in "tandem" with a vacuum cleaner. Recommended for use when installing wiring. It has average speed - about 9000 rpm.

Feedback on "Fiolent B2-30" model

Wall chaser Bison ZS-1500

Power - 1.5 kW. Included are removable drives. When using the construction of the vacuum cleaner perfectly solved the dust problem. Present electronic launch control system, jamming protection. It has one drawback - a little heavy, weight - 5.9 kg.

Wall Chaser GNF 35 CA Bosh

Power tool is 1.4 kW. High build quality allows you to use the equipment for shtrobleniya all surfaces. The model enables to make a groove depth of 35 mm and a width of 39 mm. The disadvantages of the tool is necessary to carry a lot of weight, so do Stroebe on the ceiling is quite difficult for a long time

Review of models Bosh GNF 35 CA

At what price can be profitable to buy Wall Chaser Concrete

Diverse enough price segment are different models of Wall Chaser System. Here you can find the budget "unkillable" model and a representative of the elite division at a reasonable price.

Model	Specifications	Average cost (as of June 2018), rub.
	The number of working disks - 2 pcs. Depth of cut - up to 30 mm. Groove width - 30 mm. Power - 1.4 kW. The outer diameter of the disc - 125 mm. Maximum speed - 10 000. Weight - 5 kg.	26 680
	The number of working disks - 2 pcs. Depth of cut - up to 30 mm. Groove width - 30 mm. Power - 1.4 kW. Bore diameter disc - 22.2 mm. Maximum speed - 10 000. Possibility to connect a vacuum cleaner. Weight - 4.5 kg.	27 040
	The number of working disks - 1 pc. Depth of cut - up to 37 mm. Power - 1.4 kW. Bore diameter disk - 20 mm. The outer diameter of the disc - 115 mm. Maximum speed - 13 000. Weight - 3 kg.	3 090
	The number of working disks - 2 pcs. Depth of cut - up to 30 mm. Groove width - 30 mm. Power - 1.1 kW. Bore diameter disc - 22.2 mm. Maximum speed - 6200. Weight - 3.5 kg.	4 990
	The number of working disks - 2 pcs. Depth of cut - up to 41 mm. Groove width - up to 41 mm. Power - 1.6 kW. Bore diameter disc - 22.2 mm. The outer diameter of the disc - 150 mm. Maximum speed - 9000. Weight - 4.3 kg.	6 500
	The number of working disks - 2 pcs. Depth of cut - up to 30 mm. Groove width - 30 mm. The outer diameter of the disc - 125 mm. Power - 1.6 kW. Bore diameter disc - 22.2 mm. Maximum speed - 9000. Weight - 3.9 kg.	6 690
	The number of working disks - 2 pcs. Cutting depth - 10-45 mm. Groove width - 3-45 mm. The outer diameter of the disc - 150 mm. Ability to connect cleaner. Power - 1.5 kW. Bore diameter disc - 22.2 mm. Maximum speed - 7000. Weight - 5.9 kg.	7 576
	The number of working disks - 2 pcs. Cutting depth - 1-35 mm. Groove width - 3-39 mm. Power - 1.4 kW. The outer diameter of the disc - 150 mm. Bore diameter disc - 22.2 mm. Maximum speed - 9300. Weight - 4.7 kg.	39 000

At the end of the article we offer watch a short video about shtrableniya technology.

If you are interested in the content of the article, leave your comments and offer their own versions of the best electrical contact on the designated topic.