Greenhouse from scrap materials with his own hands: robust design with minimal financial investment

to grow a good crop is difficult enough without a covering designs. cost of finished products It makes us think about how to make greenhouse from scrap materials with their own hands. This is a good opportunity to become the owner of high-quality and reliable greenhouses with minimal cost. Today in the review HouseChief.ru consider possible options for the implementation of this challenging undertaking.

Greenhouse and greenhouse from scrap materials with their hands: the device and photo designs

Features and future of wig sizes should think in advance. This will allow to calculate the required amount of material. If you have not yet decided which design should be preferred, is to get acquainted with photos of greenhouses from scrap materials, made with his own hands. They can always be used as an idea in the development of the design of future greenhouse.

Photos greenhouses from scrap materials, made with his own hands

To simplify your search for a suitable option, we gathered in one place Photo greenhouses from scrap materials with their own hands.

Below are photos greenhouses with their hands out of their frames. If you have recently changed windowShould pay more attention to such hotbeds.

Getting carcass fabrication optionally purchasing expensive material. Homemade greenhouses from scrap materials have the necessary performance, but their value will not have a serious impact on the family budget. We suggest to consider the options.

How to make a greenhouse frame of the branches of the trees in the form of arches for tunnel cover

Natural materials can be safely used for the manufacture of the frame. Consider how to make a hotbed of the arcsFormed of the branches of the trees:

Illustration	Description of the action
	Harvested willow rods 20 mm in diameter and 1.5 m long. The length of the bars should be aligned with the width of covering material. Prepare clamps, wire clippers. Set the rod by immersing it in the 10-15 cm into the ground.
	On the opposite side of the second rod set. Cant bars toward each other and are connected by clips.
	To impart rigidity establishes frame arcs connect with each other by means of ropes. To avoid damage to the covering material during operation greenhouse, remove all the branches protruding elements.

How to make the frame of the greenhouse construction pallet boards

wooden trays They are a good available materials for the construction of the frame. With their help, the frame may be constructed of any length and configuration. It suffices to disassemble pallet into separate elements, and will greenhouse from boards having good performance characteristics.

Work starts with parsing the tray into individual boards, the number of which depends on the size and shape of the future buildings. They can be either uni-erect gable structure. Possible to produce greenhouses other form except the arch. Formation of the latter may cause some difficulties.

Sometimes the construction of the frame is made of a whole palletsWithout examining the finished products on separate boards. In this case, for the frame construction will need screws and metal plates. Improve the strength characteristics of the frame, you can use mesh netting, mesh or the usual circuit.

Such a frame for greenhouse has a number of advantages:

The disadvantage is the need for timely treatment of the surfaces to prevent them from rotting. Video showing the structure built of pallet boards, can be seen below.

How to make your own hands-frames from old window frames

Old window frames - excellent available material for the construction of greenhouses of all sizes. With their help, you can become the owner of a solid structure that can last for a long time. To begin construction, should take care of a sufficient number of frames with the same parameters, or multiple dimensions. You should also buy an antiseptic and antifungal agents, which will have to handle all the elements before or after installation.

Let us consider the most important point is to make a greenhouse with their hands out of their frames. A quality of service will help the next instruction.

Illustration	Description of the action
	Prepare tubes for the foundation. Perform markup given diameter pipe. After installation frame tubes must be inside the greenhouse.
	Hammering the tube into the ground at selected locations. To speed up the process sledgehammer should turn flat and tube filled with water.
	Between the pillars hammering larger diameter pipes of smaller size to provide sufficient strength and rigidity of the structure. Control the position of the supports by means of level.
	Prepare the window frames. We check their compliance with the requirements, expanding on the ground. The ends may be used as appropriate width whole frame. The frames successively to fasten Brus. In the corners of the screws must have a larger diameter.
	To fasten the board supports and connect them in the future design of the corners by bolting.
	Set the side and end walls, controlling their spatial position.
	Bottom-set second row of boards to improve the insulating characteristics of the future structure. Mount the roof of the chosen configuration. remove old paint and the object.

How to make the frame of the greenhouse pipes

Such structures are sometimes referred arched or tunnel because of their appearance. Make Greenhouse of tubes diameter 20 mm. plastic arc length is selected depending on the width of a bed and cover the desired height.

Attention! Before installation you should decide to open the way to future shelter.

The most widely variant in which the film is lying on the sides and is fixed at the highest point of the arc. Long slats nailed to the edge of the film, it will be possible to eliminate its offset by strong gusts of wind. To open the side of the greenhouse, you just have to wind the tape on the rack and place it on the very top of the arc. Other variations are possible.

Installation of carcass pipes starts with the preparation site. Then straying from the box or timber boards, which will act as a base. The presence of the beads allows you to make a bed higher. To protect seedlings grown from the earth at the bottom of the beds of rodents placed a fine mesh. Tubes attached to the outer side of the base by means of clamps or pull on armature pieces, dug from the outer side of the base.

Comment

Anastasia Ivasheva

Landscape designer VENUS DESIGN studio

Ask a Question

«The arc should be placed every 0.6-0.7 m. If the height of the arches is greater than 1 m, it is necessary to take care of the longitudinal webs. "

From what we can do to trim greenhouse or greenhouses

Having made the framework for the future of the greenhouse, should think about covering materials. The choice will depend on the strength characteristics of the foundations and personal preferences. We offer a view of what can be done greenhouseThat it has the necessary performance.

How to install the old window frames with glass

When manufacturing hotbed their hands out of scrap materials selected old frame, it is necessary to perform their installation correctly. Installation options are many. The simplest may be called the use of glazed frame as a cover for pre-downed body, performing the role of the greenhouse. If the amount of light is not enough, you can one edge of the frame located on the south or east side, do the above. Interesting Pictures greenhouses with their hands out of their frames assembled below.

As the sheathing frame with plastic bottles

As the available material used to make the cover may serve plastic bottles. For this pre-prepared plate by cutting the bottom and the neck of each bottle. The resulting cylinder cut along to form a regular rectangle. The required number of elements will depend on the size of the greenhouse, which is scheduled to make their own hands. It is necessary to calculate the area of ​​all surfaces and divided by the area of ​​the rectangle.

All rectangles are aligned with the help of warm iron. Iron items should be through the fabric or paper. Vypryamlonnye rectangles are sewn in a single fabric sewed using, fishing line or cord yarn. You can also use a sewing machine, impose elements at each other with small overlaps. The formed web is fastened to the greenhouse frame using wooden slats. Recent either nailed or screwed screws.

How to pull on the frame of a polyethylene film

If the greenhouse is made of wood with their hands under the film, it is necessary to deal with how to pull the covering material to avoid distortions and folds. Otherwise cover lasts not very long.

Attention! Work should be done in the warm calm weather.

If the film is stretched on a wooden frame, a special training is required. Metal arc to prevent possible damage to the wind with any available materials. To tighten the film on the frame, you must throw it into the greenhouse and carefully aligned. The lower part of which was retained on the allowance should be fixed in any convenient manner. After this will only fix the film by selecting the best option, depending on the material from which it was made greenhouse.

What other materials are suitable for cladding the frame

The other materials may be used as a shelter. Often, preference is given to polycarbonate or nonwovens. The first option refers to the greenhouses that will be used all year round. Among the non-woven materials most widely used in the greenhouse spunbond. Their own hands to build a similar structure is relatively simple. It will be a great option for growing seedlings and early vegetables.

How to make your own hands hotbed of wood under the film - step by step guide

If you choose to assemble the greenhouse of wood under the film with his own hands, we suggest to familiarize with steps. This is an opportunity to avoid most mistakes made by inexperienced sensors. As a result, you collect a greenhouse with their hands out of boards, as in the photo below.

The necessary tools for the production of greenhouse own hands

For the manufacture of a greenhouse with their hands must be kept in stock:

• ax;
• hacksaw wood;
• hammer;
• a chisel or a chisel;
• fasteners. It may nails, screws or bolts;
• screwdriver;
• measuring instrument, such as a tape measure;
• building level.

Substrate preparation

Before you begin construction of a greenhouse improvised their own hands, should prepare the ground. This can be done as follows:

Illustration	Description of the action
	Perform marking territory and score Area under the base of support in the corners of the future greenhouse. We control the vertical position of each leg and the linear dimensions of future greenhouse.
	Hammered intermediate supports in increments of 1 m, by aligning their height spanned by angular pillars thread.

Setting the frame

Mounting frame is performed in the following sequence:

Illustration	Description of the action
	Drilled in the supporting rack mounting holes for bolts. To fasten the corners of the base corner uprights by bolting. The spatial position of each rack carefully controlled using a level. Set the rest of the uprights and connect them with the help of horizontal slats on top.
	Farm produce, which will be located on each vertical bar. Install the farm on a place and connect them with the help of the longitudinal beams. To increase the strength and rigidity of the carcass fasten jib.

Fixing film on the frame cells

Attaching the cover - one of the most important moments. The main thing - to provide a quality connection joints.

Illustration	Description of the action
	To eliminate film damage during operation by means of a stapler to the frame nailed laths of available material. Cover with foil and fix a greenhouse covering material by means of slats. The lower edge of the powder on the ground.

device openings

We make out a doorway and the window as follows:

Illustration	Description of the action
	On the one hand we form a greenhouse doorway. The door is hinged on three hinges. We envisage a second side window. Fasten retainers that eliminate the open window inside. Sheathed elements doorway film.

To make such a hotbed of the materials at hand female hands enough. In this situation, it is worth considering the possibility of buying the finished product, read reviews on some models.

Review of greenhouse BashAgroPlast "Snowdrop"

Review the greenhouse model ATK plast "Lazy"

If you built with your own hands mini greenhouse from the materials at hand, share in the comments, some version of their preference and how much time is spent on the construction.