How do I transfer window in summer or winter mode: manual, video

Plastic windows - though not cheap alternative to the old wooden windowsBut, in comparison with other designs, it has excellent performance characteristics. Not all consumers are aware that some models of PVC windows have a transfer function in the mode of winter-summer. What does it do, and how to move a window in winter mode, is covered at today's review.

Modes of plastic windows

It is necessary to immediately make a reservation, that make the transfer from one mode can not all plastic windows. And only those that are equipped with modern fittings. So modes:

1. Winter mode on plastic windows. This tight clamping sash windows to the main frame to where the rubber seals between them. A lot of effort on closing creates the conditions under which does not remain gaps and cracks between the window elements. A no leaks, there is no heat leakage.
2. summer - a loose fit of the sash to the frame with small gaps between them. Thus it achieved mikroprovetrivaniya rooms.
3. Standard - this is the minimum clamp sash to the window frame, but at the same time into a dense abutting planes. That is, svorka closed without gaps.

Which requires adjustment

The main purpose of adjustment winter-summer mode with plastic windows - to extend their service life. As already becomes clear, transfer to summer mode allows the seals are not compressed to the maximum. And this is a big plus for them, because the tire is at rest. Inside it there is no voltage. Add that, and fasteners are also located under slight pressure.

And a few more items that relate to the benefits of the dual-mode condition of PVC windows:

1. Postponed state sagging folds. This happens due to the fact that the loops are not subjected to high loads with a strong and constant nip.
2. Correctly or at all not closing flap window construction. The reason - incorrectly exposed abutment mode.

How to determine whether there is a window of plastic summer and winter mode

Not all consumers are aware of whether there is in plastic boxes, which are installed in their house or apartment, the function of switching of modes. It is easy to determine. To do this, you need to find the end of the sash pin (aka eccentric pressure roller). Similar to the element on the bolt, but his hat round or oval. So oval head says that the function is present. If in a round hat has a groove under the screwdriver slots, hexagon socket or slot in the form of stars, it is also a sign of the ability to change modes.

How to determine installed on the window mode

There are two options:

• We need to look at the eccentric, and more precisely, on his hat. It is an icon. It can be in the form of dashes, dots, stars. If the icon is positioned relative to a pin in the side of the room, then set winter mode. If the orientation of the side streets, the old regime. So when the question is how to transfer windows in winter mode, you just have to turn the cam so that the label was closer to the interior of the house or apartment.

• The second method used by those who are unfamiliar with the first. This requires the sheet student workbook. It is set between the door and the frame and close the window. Then start to pull the end of the sheet. If he came out freely, even if it is with effort, the window is translated in the summer closing mode. If it is broke, then set winter mode.

If the pin head has an oval shape, then define the position in which there is a window, it is necessary for the location of the oval. If the location of the vertical - summer mode, pressing of the weak. If horizontal - position of the winter, strong clamp. The photo below shows the winter operation of the plastic window.

How to transfer plastic windows in winter or summer mode

Before transfer window in winter mode, it is necessary to read the instructions. While seemingly simple process is necessary to strictly carry out the sequence of operations so as not to damage the expensive hardware. Consequences - the cost of replacing or repairs.

The translation process:

• First we need to find all the cams. Depending on the type of window accessories can be several. Usually it is three pins on the end flap by the handle, one - from the opposite end where the hinges are installed, one - on top of the plane, the other - on the bottom.

Comment

Mikhail Starostin

Team leader repair and construction company "Home Premium"

Ask a Question

"Translated into winter mode - this is adjustment of the eccentrics simultaneously. Not one of them moved, then at some nip plane will loose. And everything was done before surgery did not make sense. "

• Now we have to clean the well of the journal and the rest of the adjacent plane parts. The goal - to prevent dust and dirt to get into the eccentric displacement of the plane. That is, in such a way solve the problem of exclusion of mechanical impact on the regulated node.

• After cleaning it is recommended to grease fittings.

• If the head of a pin is round, looking for a label that determines the exposed mode.
• Now all unions should be alternately rotated to the desired position. This will require appropriate tools shaped grooves on the cap rotating mechanism. If the head is oval, the translation is carried out by conventional pliers.

• Now we have to check that everything was done correctly. Best done by tetrad sheet as described above. Not find a better option.

It is necessary to warn that some manufacturers of window fittings are made eccentric in a flush mechanism. That is, their head is flush with the plane of the end of the window sash. Before you convert euro windows in winter mode, it is necessary to cap pins pull out of the nest itself. Rotate them in the desired position, and then drown in the door.

By the way, before the transfer window for the winter hexagon mode, it is necessary to fine-tune the instrument. Its size - 4 mm. Device manufactured from a tool steel tool, bent at an angle of 90 degrees. Easy to work with him, because his principle of action - a lever increases the force several times.

Video translation process of plastic windows in winter mode

The video below shows how to convert windows in winter mode. In it clearly shows is another kind of window hardware, which in translation is not necessary to use additional tools. Everything is done by hand. To do this, simply pinch roller is pulled over and is free to rotate about its axis. In this way, and switches.

Attention! Regardless of the set mode pressing plastic windows open onto the ventilation standard way.

Requirements settings window fittings

The question is how to switch the window to the winter regime, it is not just a simple turn of the pinch rollers. There are certain requirements that must be fulfilled necessarily:

1. The operation should set the standard position for the first year. Rubber seals are still in good quality condition, so that they can ensure a tight abutting sash to the frame.
2. Do not hold winter operation in the summer, and the summer - in the winter.
3. Translation should be carried out twice a year in accordance with the temperature outside. For example, if in November, still warm, ie zero temperature, it is not necessary to do transfer to the cold. It is better to wait a little longer.

If even in the winter position between the plastic window sash, impost and the frame of the blower, means of rubber seals are worn out, they developed a service life. What to do in this case? Change to new ones. Make it easy.

Related article:

Adjustment of plastic doors and windows yourself. This task really cope without resorting to a specialist. All you need to know about the features of these regulatory structures, we have gathered in this material.

How to replace the gasket

Manufacturers are now offering five varieties of seals: rubber, PVC, silicone, from EPDM (polymer composition) and TPE (thermoplastic elastomers). The best one is silicone, its service life - 40 years.

For installation of the seal in the window frame are made grooves, which is inserted into the fitting of the seal. Therefore, wear of parts can be pulled out easily by pulling the end. For this gasket is cut from a single piece of the new seal, exactly the length. Its molded part is inserted into the slot, and pull up to the opposite side. The main thing is that the sealing cuff is taken entire longitudinal portion.

Related article:

Compactor for plastic windows. What does, the advantages and disadvantages of products from different materials, step by step instructions for replacing your own hands with photos and video, the recommendations of experts - you will find in our publication.

Is it worth doing switch

Returning to the question of how new windows put in winter mode, you must first ask another question, but is it worth doing it? After all, it is clear that in the cold season, the translation - it is a lot of pressure on the sealing Cuff, who are losing their quality, not only under stress, but also under the influence of low temperatures and increased humidity. That is, the pads work almost in the extreme conditions.

Summer tires when loosening the clamp is in released position. Nothing she does not press, the positive temperature also does not negatively impact on the material. But whatever the operating conditions of window designs, seals begin to wear all the same, which means that the time will come, and summer operation from drafts will not subside. Here is where the need to transfer to winter.

Photo guide: how to make the correct translation of PVC windows in winter

1 of 8