Wiring diagram LED strip to 220V

Illumination by LEDs It is becoming increasingly popular for two reasons: it is economically and aesthetically. to use lighting of this type, it should be noted that the board of the fixture is provided for voltage of twelve volts. That is why the need for the installation of wiring diagram LED strip to the 220V and knowing some of the nuances of the selection and use of the device. This will be discussed.

Pros and cons of LED

Every device lighting there are advantages and disadvantages. The first must be used, and the second - to competently handle. Let's consider in more detail the properties of LED strip:

Pros:

• Exceptional ease of installation. Self-adhesive tape LED 220b easily stick to any surface.
• LED lightening - the cost of the existing ones.
• Rope term work is almost unlimited. Such devices do not burn.
• The tape does not overheat during operation and is not dangerous even for PVC panels and materials.

• The tape is easily bent and can take any form, repeating the complex twists and turns.

And only one fly in the ointment:

• Dyuralaytovoe lighting is not able to act as the main light source. Not enough power.

Applications duralight

Strips with LEDs used as the additional light source and backlight. With their help designers make the emphasis on decor. White LED duralights useful for lighting cells with birds, aquarium and houseplants.

Soft light in the kitchen

major source Lighting in the kitchen It is usually at the center of the ceiling. Hostess when washing dishes, working at plate or a cutting table has to stand with his back to the light source. For a complete illumination of the working surfaces is used LEDs. Tape bonded by hanging shelves and on the perimeter apron. Soft light does not interfere with the eyes and allows a good look at everything you need.

Idea! In the kitchen, the living room is used to separate the bar. Her light diodes will look very original.

Illumination in bathroom

Backlight Rope light in the bathroom allows you to create an atmosphere of romance. Glowing streaks may draw up a mirror, lockers or shower stall. To all this the decor was safe in moist atmosphere premises, use only tape with silicone protection. They survive even dropping into the water.

Original ceiling lights LED ribbon

This is perhaps the most popular option Use Rope. How to install LED tapes ceiling lighting? They can simply mount under Baseboard ceiling or mounted under the eaves of gispokartonnogo material.

If you place a diode tape to the ceiling for a translucent material, it is possible to obtain a very effective result.

With Rope designers draw on the ceiling of intricate patterns.

Niches and arches

Draw attention to the niche or archway, you can use the backlight. If the niche is located in bedroomDiodes can operate as a night light.

Idea! If you often wake up at night, for example, if in the next room a little kid and decorate doorways duralights doors. Soft light does not disturb other family members and allows interference-free move around the apartment.

Illumination on the floor

To decorate the floor can be installed directly under the translucent tape plinths. Such an inlay emphasize sophistication interior.

originally looks self-leveling floor with built-in diode design.

Staircase with diodes

Lighting steps - it is not only beautiful, but also very practical. Even without including the main light, we can safely move from floor to floor without the risk of tripping.

The second option design - zig-zag on the wall, repeating profile steps.

Making furniture

Rope used for decoration wall, table, cabinets and nightstands. If you fix the ribbon under the legs of the sofa, there is a feeling that the furniture is floating above the floor.

Conveniently, the lighting inside the cabinet ignite when the door is opened. LEDs illuminate the profitable part of the glass: shelves and cabinet doors.

Related article:

LED table lamps for your desktop.How to choose the device which the intensity of illumination is required, where it is set, the review of the original models - about this and many other special material.

Desktop and home theater

Prolonged TV viewing and computer usage tire the eyes, especially if you have to work in the dark.

Idea! Complement desktop lighting is possible using keyboard and pad with backlight.

An aquarium and a winter garden

Winter house plants need additional light source. He needs some algae and fish in aquarium.

Potted flowers will feel great on windowsill even in the short days of winter, if you place a diode tape along the window perimeter. In this case, you can not worry about accidentally burn the leaves.

illuminated decor

Using tape paintings, Hours or statues in the house - a good idea. If you want to draw the attention of visitors at the exclusive interior, there is a better way.

bath lighting

If there is real in the suburban area bath - it is not just a place of hygiene, it is the room where friends and family gather. After a steam bath here to relax, have a drink flavored tea, To communicate. LED lightening It creates a pleasant relaxing atmosphere.

This is not an exhaustive list of possible ways to use the diode tape. The main thing - to choose the right material and connect it to the network.

Note! The minimum duration of the LED Lena - a hundred thousand hours.

How to choose a LED strip for the home, their types and costs

New models of LEDs appear almost every year. Consider the most popular options:

Type of	Main characteristics
DIP (DIL)	Have dimensions of from 3 to 10 millimeters. This is one of the first options Rope, now considered obsolete. It has good brightness, moderate heating. Mainly used in a variety of displays and electronic scoreboards. OLED diodes are used for LCD monitors and televisions.
indicator LEDs	Considered the best of the light flux. Are rectangular in shape and size from 3 to 10 millimeters. Superbright LEDs Piranha firmly fixed on the board thanks to four conclusions. The base element is made of lead. Today it is the most demanded kind.
fiber LEDs	Used since 2015. Scientists are working on a task to use this material for the production of luminous clothes.
SMD	Is a crystal, is fixed on a copper base. On contact is energized. On each substrate to obtain two or three of the crystal is fixed.
COB	Very bright chip with nine or more crystals. It is used as a lighting element for the indicators.
LED Filament	Mounted on a glass substrate, so that the light output is distributed to three hundred and sixty degrees.

Price per meter 220V LED tape and the cost of work on its installation

Cost diode tape ranges from 50 to 170 rubles per meter.

Rates for the installation of the tape:

• installation of monochrome ribbons - from 200 rubles per square meter;
• installation color ribbon - 250 rubles;
• tape installation on the facade of the building - from 300 rubles;
• installation of light music, lights, furniture and display cases - from 350 rubles;
• backlight stairways - from 400 rubles a step.

Wiring Diagram 220V LED tape to the network and some of the nuances of the installation

To connect to the LED voltage dvenadtsativoltovomu need stabilizer. Experts recommend the use of low-voltage drivers to not install resistor. Such a regulator will operate from 12 volts, its power can be adjusted.

Note! Tapes of Chinese-made bad surges transferred. Models of European manufacturers are more stable.

Voltage of 220 volts is required to use a power source having a fixed output. The scheme for such driver may have an option to use or complexity; quenching capacitor.

There is an option to connect LED strip 220V without power supply. In this case, the LEDs are powered by a diode bridge. The only drawback of this connection - stogertsovaya ripple, which is harmful to human health.

Note! Chinese manufacturers have developed a variant of the module and the matrix with a stabilizer placed on the same basis.

recommendations made

• For bathroom, food, bath room It should be acquired only tape, protected from moisture silicone or epoxy coating.
• When planning how to connect LED strips to 220V, you should know that the tape total to twelve meters are connected in series. If you want to increase the length, the connection needs to be done in parallel.

• Before attaching the tape should carefully check the reliability of the connection with the controller, power supply and socket.
• Professionals recommend to immediately replace the contact wire. As standard, they tend to be unreliable and brittle. For fixing limit switches are used to section 0.75.

Let there be light!

LED Strip have become part of our everyday life as an economical and convenient lighting fixture. We reviewed the features of the circuit connection 220V LED strip to the network, applications, and the average cost of a product. Installation work of Rope exceed the cost of the material itself, so in order to save, you can install a lighting your own hands. It's not as difficult as it seems. To help the novice webmaster offer detailed video instructions on installing LED strip: