🔨 Siding "under the tree": species, size, order assembly

If you are looking for a suitable cladding material for facade of the building, look for a siding "under the tree." It has high performance and enables to form a quality coating. We offer to meet with the main species, their distinctive features and installation procedure.

The performance characteristics of siding "under the tree", depending on the type of material

Various materials are used, which determine its performance for manufacturing siding "wood". We offer to meet with the main species and their distinctive features.

vinyl

For the manufacture of vinyl panels used polyvinyl chloride (PVC). introduced modifier, colorants, oxides coupling elements to provide the required performance of the material.

Panels made of vinyl:

• not sensitive to mechanical stress;
• hardy;
• have a long service life. Throughout the period of operation is stored presentable appearance, the material does not burn, reliably protects the substrate;
• will not rot;
• safe for humans and nature;
• biologically stable;
• allow operation over a wide temperature range.

Vinyl panels look similar to natural wood planks. Have affordable price. Easy to install, including the base radius. Sufficient flexibility of the material makes it possible to issue beautifully rounded corners. Do not impose specific requirements for care.

Acrylic

Based on modified acrylic polymers comprise siding. Introduction of additional elements increases the strength characteristics. Ready material:

• It does not require special care;
• hardwearing;
• resisting mechanical stress;
• It maintains performance in extreme cold and heat;
• the impact is not afraid UV;
• inert.

Manufacturers offer acrylic siding of different shapes. By special embossing creates an imitation of logs. There are products with a glossy surface.

Metal

Made of sheet steel or aluminum. It has high performance and long service life. Easy to assemble.

To prevent corrosion processes applied onto each panel sheeting a certain color. When the event of an accident, be sure to defect primed.

Wooden

In contrast to conventional linings, siding has a characteristic oval shape. It is obtained by the milling of wood. The material has high thermal conductivity. It has a low fire and moisture resistance. She needs extra care. Each panel requires treatment with antifungal, waterproofing agents. The varnish is used as additional protection, or mordant. Not afraid of low temperature. Easy to assemble.

fiber cement

mixture is used for the manufacture of panels consisting of sand and cement with the addition of some fiber. Finished products have a solid durability. Safe in operation. Characterized by high strength, fire resistance. Easy to install. Not afraid of external influence, retain their color and geometry under direct sunlight.

Presented in a limited range of colors. It has a lot of weight and cost. The manufacturer offers a panel with a smooth surface and characteristic texture imitating natural wood. Allow assembly in an upright, horizontal position, overlap. When cutting in size arise some difficulties due to the formation of silicon dust. Work should be performed in a mask and protective clothing.

Dimensions siding "under the tree"

siding length "wood" can be 2-6 m. The width varies between 10-30 cm. A small panel thickness: about 0.1 cm, which reduces the weight of the fabric and simplifies installation work.

Color solutions siding "under the tree"

Siding manufacturers offer different shades. The color can vary from dark walnut to pistachio. The most popular panel, cherry, oak, sandalwood.

Tip! By choosing a suitable color should focus on the stylistic total clearance portion.

1 of 8

Siding profile "under the tree"

Siding manufacturers offer "under the tree" with a different profile. We offer to meet with the main varieties, so you can choose the most suitable option for your home.

"Herringbone" and block house

Herringbone is a simplified form. Asymmetrically concave boards. At the junction Z-shaped edge. Externally similar to the battens. Formed on the facade pattern similar to the "Christmas tree".

At block house rounded geometry. Curved panels. Outwardly, they look like logs. Most often performed double. In the center, between the curved elements, concave rib provides rigidity. Thanks to his presence simulated joint.

"Ship board"

In this type of strict geometry. No concave or curved elements. Profile perform double. The joints are concave figure rib rigidity.

Advantages and disadvantages of siding "under the tree"

In siding there are certain advantages and disadvantages "under the tree." Of the advantages it is worth noting:

The disadvantage is:

Choosing a siding "wood": the recommendation, which is to listen

that buy quality stuffIt should take into account several important factors. We advise you to pay attention to:

1. Manufacturer. Preference is given to well-known trademarks. Such products are characterized by high dimensional accuracy and quality construction. Well mimic wood.
2. The presence of additional elements. Components must comply with panels of color and texture.
3. Appearance. In quality siding on both sides coated with a protective coating. It should be smooth and uniform. Geometric parameters of the slats should not differ in thickness and size.
4. Cost. It is not necessary to give preference to cheaper products made from low-quality raw materials. However, the overpayment is not always feasible.

Tip! Get the panel only after a visual inspection. The choice of the online store is not always expedient, since the color on the screen may differ from the real.

Features siding installation "on a log": main stages

To form the high quality and beautiful coating should meet with a siding installation procedure "under log". In keeping with our recommendations, you will be able to generate high-quality and durable coating.

Preparatory work

Substrate preparation includes the following steps:

• cleaning of walls, dismantling the old coating;
• by a base state. When you need to perform activities to strengthen the walls;
• with considerable irregularities, the base is leveled;
• applying to the surface compounds that prevent the formation of mold and mildew.

installation lath

Before installation should determine the type of material that will be used for sheathing device:

• the tree will be cheaper, but will last less;
• Galvanized metal profile durable. He is not a fire hazard. Different dimensional accuracy. The presence of the perforations facilitates installation.

selection fasteners It depends on the wall material. The diameter and thickness of the metal products are selected taking into account the weight of the siding and profile. Housing made of wood to choose hardware. For brick foundation require dowels.

Mounting lathing depends on the direction of the siding and mounting characteristics. Vertical installation crate is mounted horizontally. If the panel is placed horizontally - crate fastened vertically.

Before installation is applied markings. To do this around the perimeter of the house is carried out line, departing the minimum distance from the base. The line must be positioned horizontally. The desired spatial position is monitored using a level. On it will be mounted starting strip.

After applying the markings are mounted vertical guide by means of a U-shaped bracket. Thanks to them, it becomes possible to align the surface of the topcoat. Installation starts from the corner of the building. The distance between the guide are selected according to the height of the walls, siding weight "under the tree", the wind load in the region. The required information shall be indicated by the manufacturer on the package facing material. On average, the step is 0.4-0.5 m.

wall insulation

If necessary, in the process of sheathing installation performed external wall insulation. Permeability heater should be higher than that of the wall material. This will prevent condensation, which results in the destruction of the walls. Most commonly used mineral wool slab. Top layer attached hydroprotective membraneWhich provides removal of steam, but will not allow moisture to be inside the building.

Fixing the siding

In the first stage the first cladding panel is inserted into the corner profile. The docking with the starting strip is carried by the tool joint. Provision is 6 mm gap between the lower temperature part of the lock and the first panel. Fasten the panel to the crate, observing the technological gaps.

For more information about the installation work can be found in the following video:

Share in the comments, if you had to install siding "under the tree." Why did you choose this material?