Modern heating technology It allows not only significantly save on energy costs, but also to use devices that do not violate the aesthetics interior. classic radiators all the rarer in new apartments and houses. Take their place warm floor and skirting boards. Water-side began to enjoy strong demand recently, but now in popularity this simple heater tends to occupy the first place in the ranking. What is the this latest heating systemWarm water baseboard? Price, reviews, professional recommendations for installation - in this material.
Read article
- 1 The reasons for the popularity
- 2 disadvantages of the system
- 3 The device and technical features
- 4 Mounting your hands warm water baseboards
- 5 Warm water baseboard: price, reviews, and reliable manufacturers
- 5.1 Hersteller
- 5.2 Price per square meter of warm water baseboards: popular models
- 5.3 Reviews of the contour of water heating system
- 6 A few tips
- 7 What is the result?
The reasons for the popularity
It is worth mentioning that heats the floor systems are of two types:
- water (having a circuit filled coolant);
- electrical (containing the electrically heated cable).
Water baseboards complex electrical installation, but have a number of advantages, including in front of the rest of the heating system:
| Security | The design of the water skirting board does not provide open hot surfaces, therefore, there is no risk of burns. This factor is especially important if a family has young children. |
| The absence of allergens | Unlike radiators, Heating water baseboard does not accumulate on the surface dust mite. Allergy and Asthma This heater - salvation from constant exposure to irritating the airways of the heated dust. |
| uniform heating | The circulation of the heated air is uniform throughout the area and prevents moisture and mold in the corners of rooms |
| A small installation cost | Installation of water warm plinth available in almost every family. If desired, the installation can be carried out in-house. Even in the absence of skills, the installation works in the same room will take no more than three hours. |
| economy | Heating by means of plinth enables to heat a room with ceilings of up to four meters high. Water heater It does not require spending more than a traditional heating system. |
| small size | A significant advantage of the water baseboard heating - the possibility of any arrangement furniture. Contour system allows you to place cabinets in any convenient location. for built storage systems It is the option of laying in which the plinth surrounds cupboard. |
| aesthetics | On sale you can find many options for colors and forms a plinth. If necessary, the structure may be painted interior colors. |
| Preservation of a healthy indoor climate | Due to uniform heating and lack of open heating elements, the system maintains an optimal temperature in the house and does not desiccate the air. |
disadvantages of the system
Have baseboard hot water heating and disadvantages that you should know before you decide to install it:
| Cost of materials | It must be admitted, as long as the cost of components baseboard heating system exceeds traditional batteries. This is a temporary disadvantage. With the growing popularity of such heating will grow and the market offer. In the competition the producers will reduce the price, but it is a modest proposal on the market can not be said about the prices. |
| Defacing walls in places abutment plinth | With this system disadvantage is debatable. Provided quality Mounting such problems should not arise. Difficulties arise only during an emergency, when the circuit gives flow. |
| Reducing the overall performance of the furniture | This problem can be avoided, if you create a design, large envelope, stationary set items. Such maneuvers will lead to additional costs, but will pay off the lack of energy losses. |
The device and technical features
Externally heating device looks unremarkable: it's a long plinth width of not more than two dozen centimeters.
The device structure includes:
- radiators brass in the form of thin plates, they are heated and transfer heat to the air;
- module containing a heat transfer fluid, tubesThrough which the liquid circulates;
- decorative cover panel with a slot for the passage of heated air;
- the rear strap, protects the wall from the high temperature heater.
Note! The best choice is considered a plinth with a copper circuit. Copper is an excellent conductor of heat and superior in its performance brass and other materials.
The operating principle of the heater is very simple. Water is heated in boiler system, then piped heat is distributed around the perimeter of the room. Heat flow is moving from floor to ceiling, uniform heating of the entire space of the room. heat flows are along the walls, warming their surface. The wall also are beginning to heat the air.
Note! The average heat capacity component plinth ranges from 200 to 250 watts.
Important! Before starting work, you must calculate the water warm floor. The data for the calculation include room size, wall material and features windows. all possible heat losses should be taken into account.
The coolant in the baseboard can be warmed up to 70 degrees, but maintain such a high temperature is not recommended due to the possible damage of walls and decorative coating. Optimum temperature radiators - about 40 degrees. This index will provide a uniform heating of the air in the room to a comfortable temperature for a person in twenty-four degrees.
Related article:
Electric floor plinth. Many technical advantages and unique design has electric floor skirting. In a special publication, we shall understand, what is it as good as it is to choose the right and the secrets of the installation without errors.
Mounting your hands warm water baseboards
The key to successful operation of any heating system - competent installation and use of quality materials.
Note! coolant temperature control is performed by a special device to the reservoir. Installation of an automatic system with thermostat.
Materials for the installation:
- metal and plastic tubes for connection to the plinth boiler;
- special adapters to secure the sectional elements;
- brackets for hanging and screws for fastening to the wall (if necessary - dowels);
- Building heat-insulating tape;
- adjustable wrench, a drill with a hammer and knife construction.
Important! Counting the dimensions of the plinth for a single room, it should be remembered that the overall device length should not exceed fifteen meters. This is important in order to maintain the temperature of the coolant.
First of all, it is necessary to hold the pipe from the heat source, boiler or central heating system, the room where the plinth is mounted. It is necessary to carefully measured the distance and cut the required number of pipe for connection to the first section of the door.
The sequence of installation plinth
| Photo | Description |
 | Wall fixed bottom rear of the plinth with screws. |
 | Top glued insulating tape width corresponding to the width of the device. |
 | Set upper and lower plate. |
 | The contour of the radiator is connected to the inlet pipe with the nuts, fittings and gaskets. If there are corner joints - fixed pivot members. |
 | On the reverse side of the top panel is glued reflective tape. |
 | The panel is fixed on the brackets between the bars, set caps for the heads of screws and other decorative parts. |
Warm water baseboard: price, reviews, and reliable manufacturers
Experts believe that the contour of heating technology has a great future. Marketers are hoping that in the next decade, more than half of homes in Europe to replace the traditional battery to loop systems.
The harsh weather conditions of our country, such devices can and will not be a full replacement battery heating system, but may act as an additional heat source.
Hersteller
As already mentioned, the quality of the device - an important part of the reliability of the entire system. To date, the domestic market is represented by more than a dozen manufacturers, including three companies have a long experience and a positive evaluation of consumers. Here they are:
- Mr. Tektum. This domestic company offers quality products at affordable prices for the Russian consumer. Warm water baseboards mr tektum different high functionality and differ in appearance: aluminum plate with a stylish design.
- Best Board. The Austrian company offers products that are of the highest quality and availability of energy-saving technologies. The company is a developer of innovative solutions that can significantly increase the efficiency of the device.
- Rehau. If you want to present German quality - you in Rehau. These devices are extremely reliable and durable, known for a long service life of several decades.
Note! The value of the contour of the heating system is influenced by the size of the room, the geometry of the room, the level of heat, the size of elements of the plinth.
Price per square meter of warm water baseboards: popular models
| Manufacturer | Picture | Price per linear meter, rbl. |
| Mr. Tektum |  | 3 800 |
TherModul |  | 9 900 |
| Best Board |  | 7 000 |
| Teplin |  | 8 000 |
| Rehau |  | 9 800 |
hot water baseboard
Reviews of the contour of water heating system
Sergey, 62 years old, Tver: "Bought with his wife a house outside the city. The house was an ancient heating system, the battery is leaking, rusted boilers. In any case, it was necessary to completely redo everything. Son persuaded to buy warm water baseboard. Frankly, I resisted, because accustomed to a more traditional version with radiators. I do not regret it for a minute. All rooms have warm walls are free, no dampness. Tektum company bought components: cheap and the quality is excellent! "
Irina, 40 years, Rostov-on-Don: "The apartment was built in a housing cooperative, firm-builder offered different types of heating systems to choose from. Thank you master, which has popularly explained the benefits of such a system. In the bathroom, in the kitchen and hallway floor heating installed, and in the room - a plinth with a water circuit. I liked that you can put the furniture where you want. And another plus: blinds not "burn", as with radiators. Fine synthetics deformed once, and then just a beauty! "
Gregory, 32 years, Smolensk "Our apartment is small, the living space of 32 square meters. A battery in the old house were placed in each room for as many as three of them! Where to put the furniture, do not understand, but if you close their furniture, so the heat goes into the cupboard or sofa. We took permission and ordered the installation of a warm floor. Masters made it so that there is a skirting around the cabinet, and even a seating area. The apartment was much warmer! "
Related article:
Underfloor heating on the wooden floor beneath linoleum. Not everyone knows how to properly mount the floor. In this review, we consider types of technologies, what materials are needed and the sequence of self-assembly.
A few tips
- The length of the water circuit in the room should not exceed 15 meters, if you need more - should be to purchase 4 autonomous parts to minimize heat loss.
- efficiency of the device decreases, if you hide it behind furniture. During installation, optimum use of space.
- It is not necessary to purchase stickers to simulate wood or stone. They significantly reduce the heat. It is better to just buy a panel with the desired pattern.
What is the result?
Picking up the heater should focus on quality, price, reviews. Warm water baseboards rapidly gaining popularity. They are durable, easy to install and economical, are an excellent alternative to traditional radiators. It is particularly important that such heating system is suitable for areas with a non-standard geometries, for example, a large number of window openings.
Thanks to the warm circuit, the house will not appear fungus and mold, and the air will keep natural moisture.
