LED lights for the kitchen cabinets under: review of the ideas

To ensure comfortable conditions in our day is often used Neon lights Kitchen cupboards under. Close inspection of the technical devices and mounting techniques useful in practice. In some cases, it is permissible to perform all the work with his own hands, without the involvement of outside experts, the extra cost and hassle.

Basic definitions and drafting

At first it is necessary to note the reasons for this kind of selected lighting devices.

Their small lifespan is accompanied by increased energy costs. Such devices have impressive dimensions, they are difficult to hide in the elements furniture.

But these fragile flasks contain harmful to human chemical compounds. We need to handled with care during replacement. Large sizes determined limited applicability in confined spaces.

Halogen lamps also consume a lot of electricity. This is - the point light sources.

In view of the above drawbacks, the advantages listed below LED backlight under the cabinets:

• These devices for the same light output consume less electricity than energy-saving fluorescent lamps models.
• They differ extended life. Standard equipment of modern level shall serve 25 thousand. hours in the ON state, and more.
• LEDs included quickly, without delay. In the process, they are smooth, do not emit other sounds.
• They do not contain mercury vapor, and other dangerous chemicals.
• Such devices do not emit radiation in the infrared spectrum.
• They are equipped with efficient electronic circuits that compensate for the large voltage drops in the power supply.
• LED lights creates in the form of tapes, point and volume sources. The wide range of models is not difficult to find an option perfect match user needs.
• It should be emphasized that the LED light sources are highly compatible with the latest systems and remote control software. They do not create network congestion.

The only drawback is the high cost. But it is necessary to calculate an accurate comparison, how long it will run for LED lighting food under cabinets. In summing up the final result taking into account the costs of paying electricity bills to make the correct conclusion is not difficult.

This advantage is particularly appreciate the designers. They are often used LEDs for exclusive interiors, Spectacular lighting elements, eliminating some architectural defects.

What is the LED lights under the cabinets for the kitchen

The list of benefits is partially answered this question. But accuracy is necessary to further explore the functionality of such lighting kitchen units. First of all, it is necessary to create comfortable conditions for the human eye. Here we are talking not so much about the power of light as its quality.

Kitchen is used by all tenants on a daily basis, a lot of time. Here it is necessary to ensure even light, no flicker or delays when turned on. Useful selection of pleasant spectral range.

In this room there are several zones: for the product, washing, hob, table for meals. They do not necessarily have to use at the same time, so the suit local installation of devices.

Here is working on different equipment, often used ventilation. Not excluded vibration, increased humidity, temperature changes. These adverse factors will not be able to damage the LEDs. Other devices in such conditions will break down faster.

Overview overhead LED lighting under the cabinets for the kitchen

The following illustrations demonstrate the potential applications and different versions of devices of the group.

These products are manufactured in standard sizes. They are suitable for the assembly of cabinet furniture. This example shows the installation of the product in the niche cabinet.

In this schematic figure shows the housing. It is created from aluminum and metal alloys. It is designed not only to create the necessary rigidity frame. With it, the excess heat is given, which is isolated semiconductor devices in the ON state. The cover is made from translucent opaque polymer. She scatters radiation. While maintaining a short distance between the diodes gives the impression that the lights inside the continuous band.

These devices look like special supports for cabinets made in the style of high-tech. In fact - it's cost-effective light sources. They are placed over the individual functional areas.

This model of the luminaire is attached with screws to the underside of the enclosure. It plugs into a standard 220 V power supply, so the furniture to create the necessary opening for flush. Here we have applied touch control. To enable just touch the marked area on the device.

Related article:

LED table lamps for your desktop.How to choose the device which the intensity of illumination is required, where it is set, the review of the original models - about this and many other special material.

Recessed LED lighting furniture

The illumination of kitchen units installed in furniture design.

Note! Figure 15 shows № color temperature. Range from 4000 ° K to 6000 ° K, as in the image - it "cold" light suitable for processing ultra interiors. Soft shades creates a source with a temperature of from 2000 ° K to 3000 ° K.

This model is equipped with a push-type connector. When cabinet door advances, voltage is applied to an electronic circuit. No further action by the user is not required, and to turn off the device.

Other placements of LED lighting

With the next pattern shown possible to eliminate the disadvantages of the individual in interior.

Installation of overhead LED lighting under the cabinets for the kitchen made to facilitate the visual perception of large heavy objects. It creates the illusion of "floating" objects resting on the floor. Note for comparison in areas without light. They look less harmoniously.

control unit

LED semiconductor devices work when connected to a DC power 12-24 V. Therefore, you need to equip the system of specialized devices. It converts standard alternating voltage network 220 V. In some models, the corresponding block installed inside the lamp housing.

Related article:

Wiring diagram LED strip to 220V.In this article we consider in detail the pros and cons of LED application areas. How to choose the right tape, their types and the average cost. And the secrets of the installation with their own hands.

This figure shows the composition of the LED lighting system. The constant voltage 12 V to the controller. This electronic control unit is controlled via the infrared remote link device. Depending on your selection, you can apply power to the desired group of semiconductor devices, which are capable of emitting light in different ranges of the spectrum.

Such a controller can be connected to a home network, or directly to the Internet. The owner with the appropriate equipment can be remote-controlled lighting, being at a distance of thousands of kilometers from their food. However, these opportunities are rarely needed. However useful governance movement is not on a key chain, but on the screen of their own smartphone or tablet.

Creation of project documentation and equipment

The exact composition of the necessary equipment will be clear after specifying the parameters of a particular technical specification.

This example shows the main components of the lighting system. Based on it, the power is determined, the number of connected light sources, and other characteristics of the individual blocks. A list of future purchases it is necessary to add tools and accessories that will be needed during the execution of assembly operations.

Installing lighting fixtures

If you buy lighting for kitchen cabinets in a factory performance, its installation will not cause significant difficulties:

• All work is performed with the conductors of the power off respective chains.
• Mark out the place of installation fixtures. Cabling to the bottom of the cabinet - not a complicated operation. Boxes of furniture mounted on legs. The slit closes the bottom decorative strip, which is fixed by special latches.
• The housing is attached to the bottom of furniture screws.
• Power is supplied through a separate switch. It is set in a convenient location for the user.
• After checking integrity of the electrical connections performed test run.
• To avoid damage to the cable during operation using the modern type, with high-quality multi-layer insulation. If it passes through the holes in the walls furnitureIn these areas is carried protect further segment corrugated pipe.

Examples of successful solutions

1 of 6

Additional recommendations and conclusions

LED lighting for the kitchen above the work surface is not too difficult to install yourself. If you have problems, you can get advice from experts store where purchased equipment. In some cases, when purchasing their goods trading companies propose to create a project for free. Final conclusions should be made taking into account all the information in this article.