Snowmen New Year with their hands: manufacturing options and step by step instructions

If you have already started to prepare for the New YearNote any snowmen can make their own hands. You need to buy the expensive stuff. It is possible to use the means at hand. We offer to find out what it is.

Big Snowmen New Year with their own hands

If you are a lover of outdoor activities or just like to decorate the area around the house. On the eve of the New Year the best solution would be a large figure of a snowman. We offer to get acquainted with interesting ideas that you should definitely adopt.

Sculpt a snowman made of snow

Beautiful snow figure always attracted the attention of passers-by. We only need its original issue. We offer to find out how to make a snowman made of snow, if before you do not ever do that.

Form the torso snowman

Wet snow is required for the formation of the body. Out of the ordinary to do something big will not work. If there is one, we proceed as follows:

• forming a small ball, much clutching a small amount of snow;
• We laid a lump on the ground and begin to roll it, giving the opportunity to adhere to the snow from all sides;
• Get someone attach the final shape.

In more detail to understand the peculiarities of creating snowmen out of the snow to help the following video:

Create a face and add accessories

The head of the future shape is formed in the same way as the body. However, the resulting lump should be smaller. You can then proceed to the formation of the person and a snowman decoration.

The nose is most often made from carrots. For the eyes and mouth using the embers, but if you have none, you can use the buttons of the right size. Cap can replace the bucket. However, it is possible to use the old headpiece or sculpt it as snow.

Attention! Used decorative elements must not be afraid of moisture.

We offer a selection of photos to see, among them, you may find the idea of ​​inspiration:

Making snowman from automobile tires

The lack of snow as such or its lack of humidity are not grounds to the house there was no Christmas figure. Instead of the rolled snow is quite possible to use the old machine tires. We only need to paint them in the appropriate color. Which as a result are obtained snowmen, you can see in the following photo:

Snowman from plastic bottles - a sculpture, not subject to weather

If the snow has not fallen, but there were a lot of plastic bottles, they can also be easily used to make a snowman with his hands. To work will also need:

• two wire diameters. With smaller elements will be interconnected. Large frame fabrication is required. If the wire is not possible to use a rope;
• awl;
• White paint;
• decorative elements.

In order to create a New Year's figure, cut off from each container and the inside bottom of a painted white. We are putting the elements together, forming a kind of garland.

Tip! Instead of a thin wire can also use a stapler.

We produce frame. From its shape and size of the future appearance of the figure will depend. Fasten the plastic to the frame. That at this stage no difficulty should wrap a rope frame. Resulting decorate a snowman. Possible result in the photo:

From what and how to make a snowman crafts at home: interesting options

New Years Eve in most educational institutions are organized competitions craftsMade from scrap materials and not only. If you just can not come up with of what to do craftsStudy the collected us options to make the most beautiful snowman. All methods are fairly simple and can be used in the joint work of children and parents.

How to make a snowman of paper: interesting options

Paper opens up many creative possibilities. To make a snowman of paper with his own hands in various ways. Quite popular modular origami technique. For Christmas figures require paper modules. The larger the number, the greater will snowman. Module, a first cycle in which the modules are inserted pockets elements next round corners.

Attention! Try initially to give a figure rounded shape.

When the workpiece is fully ready, it will decorate.

If you still were not familiar with the technique of origami, how to make a snowman of paper can be seen in the following video:

If this technology seems to be too time consuming and did not get to learn it, consider the following options:

Making your own hands snowman made of cloth

The main drawback of paper products is poor resistance to water. In addition, the figure is easy to damage and difficult to be cleaned of dirt. That is why, if you want to do under the treeWith which a child can play, or that, if necessary, can be washed in washing machine, Sew their own hands snowman made of cloth. Depending on the creative abilities and skills, it is possible to produce a flat or three-dimensional shape.

For making it possible to use any solid matter. Most often, preference is given to the mahr fleece or feltBut it is possible and the use of ordinary calico. We have prepared for you patternThat you can take as a basis:

How to make a snowman with his hands out of socks, two interesting options

A suitable fabric for making snowmen with their hands there will not for everyone. In this situation, crafts can be made from socks. Perhaps in two versions: one-piece figure and capacity. Consider both options.

Beautiful figurine of a snowman

Prepare:

• a new pair of socks right color;
• glue. If possible, it is better to use Melt;
• scissors;
• pins;
• buttons or beads;
• thread. Better in several colors, but one necessarily of the same color, like socks;
• rice, which will be used as a filler. It is also possible to use buckwheat, peas or lentils.

Do crafts in the following sequence:

• cut the sock in half;
• the reverse side bandages thread open end portion which comprises elastic sock;
• removing element on the front side, fill it with the filler;
• contractible member on the second side;
• forming the head, dragging the workpiece thread in the right place;
• We proceed to the decoration: put on a hat, whether glue eyes and nose sew, sew buttons of, tie scarf.

Attention! Cap may be made of another material or of the second portion of the sock. In the latter case, the element must roll, giving the desired shape.

Glass for pencils or a beautiful vase

To create similar crafts for the New Year should be prepared container, which will be located around the figure of a snowman, and replace rice for padding polyester or wool. Perform work in the following sequence:

• We put on a sock on the prepared bottle. The excess material is cut off, leaving a small margin;
• causing the inside of the sock small amount of glue, we put it into the bottle to prevent displacement relative to the glass fabric;
• fill the space between the capacitance and the filler cloth;
• thread forming head;
• delaying material tightly in the neck;
• decorate fake;
• cut to hats strip whose length is equal to the length of the neck circumference, and the ring having an inner diameter equal to the diameter of the neck. It is best to use a felt. In its absence, you can use the cardboard. Glue the element into place.

Tip! Ready to hack maintained its stability, should choose glass containers instead of plastic. Although the latter is much safer to use.

Snowmen from cotton balls

Interesting figures can be formed from cotton. To create a snowman crafts with their hands, should also prepare:

• PVA glue with a brush;
• skewers for kebabs. If one is not available, you can use the wire pen or any other object having a similar shape;
• decorative elements.

The manufacturing process is as follows:

• roll off two - three balls of different diameters;
• daubed formed PVA glue bead;
• combine elements of skewers for kebabs. Excess coupling elements are removed;
• decorate crafts.

Embroidery with snowman

If volumetric figure is not required, New Year's toy often embroidered by hand. Equipment can be any. It all depends entirely on your preferences. The finished image can then be pasted on cardboard, used alone or make a major garment decoration.

To help you find the right scheme, we have prepared interesting options for you:

Snowmen in Christmas-tree balls

To add originality usual Christmas tree balls, One can also make a New Year's hero. It is only necessary to connect them together in a suitable sequence and further decorate. How to do it, look at the following video:

Christmas snowmen with their hands out Styrofoam balls

Today, the market can find a foam balls, which are often used for a variety of craft projects. As a rule, they are white, and therefore are ideal for making a New Year's Snowman with her hands.

If the resulting figure to attach the loop, you get a beautiful decoration for trees. A special stand will add stability. This snowman will look beautiful on a shelf or table.

Description of the manufacturing process and the necessary materials can be found at the following video:

Snowmen of paper plates

Paper plates - a good material for improvised Christmas character. You should immediately purchase products of different diameters. Less will be used for the head, more - for the body.

Ideas and inspiration for the sequence of actions can be found on the following video:

Snowmen of openwork napkins

If you have a beautiful openwork napkins round shape and white color, they can also be used as a material for making crafts. We only need the glue or a stapler to connect with each other and decorate.

Attention! It is desirable to use napkins different diameters.

Snowmen of plastic cups

If you have gathered a lot of plastic cups, one can also make crafts snowman with his hands. Such falsification can be safely installed inside the house and outside. In the second case it is necessary to make a figure more and pick up the accessories, are not afraid of water and frost.

Attention! To connect the elements required stapler.

We offer watch the video to find out in detail the sequence of actions:

Snowman from threads, adhesives and balloons

For the manufacture of Christmas figures must be kept in stock:

• white thread;
• beads (any color);
• PVA glue;
• a needle;
• Scotch;
• decor.

For the formation of elements inflated balloon size. Dressed with a thread a needle, we are pulled through a bottle of glue and tightly wound onto the ball. Having received the desired density, allowed to dry at room temperature.

Attention! Take care that the thread not squeezed ball.

After complete drying of the adhesive composition neatly separate the workpiece from the ball. Last pierce or pull. It will only have to connect the elements with each other and decorate.

Step through the process of manufacturing is presented in the following video:

Snowmen of the CD-ROM drive

CD-disks there are many. Some of them have not read. Feel free to use such products for the Christmas crafts.

Variants enough. You can connect the disk 2-3 with each other, forming a well-recognized figure. You can use one drive as a base. How to do it, you will see the following video:

edible Snowmen

New theme is relevant in the design table. Not to worry about the health and safety of loved ones, especially if a family has young children, it is necessary to make edible snowmen.

The easiest option - to boil two eggs and interconnect skewer. To cap and spout suitable boiled carrots for eye - black pepper.

If this option you seems too simple, use the master classes presented in the following video. They will help you to create a festive atmosphere and beautiful Contents table:

Share in the comments, some snowmen crafts for kindergarten and at home you do with your hands, help to your child, and if you are satisfied with the result.