💡 Bar counter: their own hands or buy ready-made design

Master Classes October 12, 2019

Previously, we could see the bar in foreign films, cafes and bars, and many people are dreaming of the sweet life in the West, would be constructed at home. Now many domestic designers make extensive use of this element in creating conditions the interiors of apartments and houses. In this review online magazine HouseChief.ru we see, what is the structure, its parameters and how to collect their own hands for the flat bar.

Bar table - very beautiful and functional piece of furniture environment
Bar table - very beautiful and functional piece of furniture environment

Read article

  • 1 What is the bar in the apartment
    • 1.1 Types of bar counters
      • 1.1.1 island design
      • 1.1.2 Combined or embedded option bar
      • 1.1.3 Bar counter-baffle
      • 1.1.4 near-wall construction
      • 1.1.5 The two-level bar
  • 2 Materials used
  • 3 What should be the height of the bar from the floor in the kitchen
  • 4 Independent creation of the bar in the loft
    • 4.1 Tools and materials
    • 4.2 Instructions on creating
  • 5 The bar counter made of wood
    • 5.1 Preparation of the necessary tools and materials
    • 5.2 The manufacturing process of the wooden bar
  • 6 How to make a home for the bar made of stone
  • 7 As with their hands to make the bar of plasterboard
    • 7.1 Step-by-step instruction
  • 8 Foldable bar from transport pallets with their hands
  • 9 How to fit the studio bar, kitchen and cafe
  • 10 Ready bars Kitchen: prices and photos of popular models
  • 11 A few words in conclusion

What is the bar in the apartment

Bar called construction consisting of countertopsMounted on a stand or support. It is often complemented by special high chairs or stools. As an original complement to the interior, bar also very functional: it lets zonirovat roomCan serve as a dining table, an extra work surface for food preparation and storage. And, of course, this construction is used for its intended purpose in cafes, bars and large studio apartments.

💡 bar counter with his own hands: the simple steps to change the look of the kitchen
Barstand may be a continuation of kitchen units

Types of bar counters

At the moment, the furniture manufacturers offer a large number of advanced models of bar counters. These structures differ in appearance, shape, placement, configuration and material of manufacture.

There are many types of bar counters
There are many types of bar counters

island design

This type of structure is suitable for a large room with kitchen and living room. Barstand located in the center and becomes a basic element interior. The advantage is that it can be approached from any direction and place a lot of guests. "The Island" can be rectangular, oval, P- and L-shaped - it all depends on personal preference and the size of the room.

💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen

Combined or embedded option bar

In this case the bar is a continuation of the work surface, windowsill or island part kitchen units. construction usually do low altitude, and its appearance must be combined with the design of the furniture and countertops in the kitchen. This rack is perfect for small spaces and saves space.

💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen

Bar counter-baffle

The most common variant of the regeneration kitchens studio apartments. With this arrangement, the bar, she serves as a separator between kitchen and living room and it becomes a kind of a dining area. Often stand-partition is a continuation of the wall.

💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen

near-wall construction

The bar counter is installed directly from the walls of the room, which allows it to fit in virtually any interior design. The structure may be on supports, cabinet or attached to a vertical surface by means of brackets. Typically, such a variant is used in the regeneration of areas with irregular layout.

💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen

The two-level bar

One of the easiest options bar. In this case, the worktop is fastened to the working surface kitchen units. It is a good idea for the studio apartments for space division. The low side is in the kitchen, and the highest part of the bar - in the living room.

💡 bar counter with his own hands: the simple steps to change the look of the kitchen💡 bar counter with his own hands: the simple steps to change the look of the kitchen
💡 bar counter with his own hands: the simple steps to change the look of the kitchen

Materials used

a variety of materials are used for the manufacture of bar counters, which allows them to enter virtually any interior and create a variety of designs to suit every taste. Consider resistant variants of different materials:

  • natural wood. This material is classic in the furniture industry. Of wood It can be made bars of almost any size, and they will become a worthy ornament of any interior. To improve the aesthetic qualities, and protection from exposure to moisture and temperature changes wood coated with special structures and varnish;
The bar counter made of natural wood
The bar counter made of natural wood
  • brickNatural or artificial stone, gas and foam concrete. This is a fairly massive construction, which are mainly used in interiors: ethnic, loft or kitsch. The bar counter can be completely made of these materials, or simply decorated with them;
The design of natural stone
The design of natural stone
  • gypsum plasterboard. Bars made from this material usually have a small size and a straight configuration. In this case, drywall can create bars of any shape;
Stand Drywall
Stand Drywall
  • glass. It allows you to make the interior more elegant, light and airy. bar counter from glass It looks great with a wooden kitchen with facades with glass inserts;
Glass mini-bar rack
Glass mini-bar rack
  • chipboard and MDF. Budget option for those who love the natural wood, but the budget does not allow. It is popular due to the large range of colors and textures.
Bar counter of chipboard and countertops made of artificial stone
Bar counter of chipboard and countertops made of artificial stone

In addition to these materials for the manufacture of a metal bar racks are used, rattan, plastic and even leather (natural or artificial).

Elegant bar made of wood with leather upholstery
Elegant bar made of wood with leather upholstery

What should be the height of the bar from the floor in the kitchen

There are standard size bar for bars, cafes and kitchens, but can be manufactured according to individual sizes. Classical design has the following characteristics (A / W / H) - 1200/550/1050 mm. If you decide to make the bar with your hands, it is recommended to adhere to these standards, as appropriate in terms of ergonomics and choice chairs.

Standard dimensions of the bar
Standard dimensions of the bar

The dimensions of the bar are selected individually. Thus, the length of the countertop is defined kitchen area, Fantasy and the number of family members (600 mm / 1 pers.). The width of the bar for the kitchen must be at least 30 cm, but the optimum - 500-600 mm.

Under the bar is necessary to choose the chairs or stools appropriate height
Under the bar is necessary to choose the chairs or stools appropriate height

Recommendation! Choosing the bar, remember to take into account the growth of family members. People of average height easy to use design with countertop height from floor 1100-1200 mm, and high - 1300 mm.

Independent creation of the bar in the loft

Make the bar with your hands is not so difficult. To do this, you need to have the desire, the tools and the ability to use them. This manual is not the size, because they need to be adjusted individually. We are considering the manufacture of the bar for a pub, but it does not mean that it is not suitable for an apartment. Just can take this as a basis for the design and reduce its length, and the height can remain the same - the standard.

💡 bar counter with his own hands: the simple steps to change the look of the kitchen
Bar in the loft

Tools and materials

For the manufacture of the proposed bar will need:

  • wooden boards (transport elements can be used pallets);
  • profiled tube;
  • mordant and varnish;
  • primer;
  • paint;
  • screws;
  • wire;
  • LED-strip with power supply;
  • welding machine and the electrodes;
  • "Bulgarian" with cutting discs of metal;
  • Sander;
  • drill and screwdriver;
  • set of drills and tips;
  • spray, roller or paint brush.

Instructions on creating

Before embarking on the production of the bar, you need to create a design sketch and make detailing showing all part dimensions.

IllustrationDescription of the action
💡 bar counter with his own hands: the simple steps to change the look of the kitchenFrom shaped tubes, cut to the desired size to be manufactured by welding two sections (such as pictures)
💡 bar counter with his own hands: the simple steps to change the look of the kitchenFurther seams clean descaled, primed and color section
💡 bar counter with his own hands: the simple steps to change the look of the kitchenPrepare a set of boards in the required amount (cut to size and carefully sanded to avoid burrs)
💡 bar counter with his own hands: the simple steps to change the look of the kitchenBoards handle antibacterial and refractory compounds, and then reveal their stain and varnish, and dry thoroughly
💡 bar counter with his own hands: the simple steps to change the look of the kitchenWhile dry board, set design of a shaped tube. Fasten it to the floor and the wall using bolts with "new settlers"
💡 bar counter with his own hands: the simple steps to change the look of the kitchenTop set of thick worktop treated boards, which on the one hand attached wooden skirting
💡 bar counter with his own hands: the simple steps to change the look of the kitchenWe reveal countertop stain and varnish. After drying proceed to sewing the metal skeleton prepared and cut to size boards
💡 bar counter with his own hands: the simple steps to change the look of the kitchenFor originality on the two end sections of the board is set horizontally and vertically in the middle
💡 bar counter with his own hands: the simple steps to change the look of the kitchenOn cross set LED strip - and the bar is ready

The bar counter made of wood

The bar can be made from almost anything, for example, of wood transportation palletsWhich can be very easy to buy. In addition, they are inexpensive.

Photo made with his own hands the bar to the kitchen
Photo made with his own hands the bar to the kitchen

Preparation of the necessary tools and materials

For the manufacture of the bar of the transport pallet, we need the following materials and tools:

  • wooden pallet - 6 pcs .;
  • screws;
  • jigsaws or a hacksaw on a tree;
  • Sander;
  • scrap or crowbar;
  • primer and paint;
  • electric drill and screwdriver;
  • drills and tips.
Tools and materials needed
Tools and materials needed

The manufacturing process of the wooden bar

We offer step by step instructions for the production of the original design, which can raise anyone.

Picture Process description
💡 bar counter with his own hands: the simple steps to change the look of the kitchenTake the transport pallets 6, of which one will be used for the manufacture of "pockets"
💡 bar counter with his own hands: the simple steps to change the look of the kitchenRough wood processing carry sander
💡 bar counter with his own hands: the simple steps to change the look of the kitchenAfter using the sandpaper finally grind wood
💡 bar counter with his own hands: the simple steps to change the look of the kitchenTreated pallets are painted in the desired color using a paint roller or brush
💡 bar counter with his own hands: the simple steps to change the look of the kitchenWhen the paint dries, the two pallets are interconnected by means of two perforated metal plates (this is a countertop)
💡 bar counter with his own hands: the simple steps to change the look of the kitchenTo fasten the table top sides and the middle rack with metal parts and screws. Construct worktop up overturn
💡 bar counter with his own hands: the simple steps to change the look of the kitchenCut the sixth tray and make of it a "pocket"
💡 bar counter with his own hands: the simple steps to change the look of the kitchenOne of the boards close the end of "pocket"
💡 bar counter with his own hands: the simple steps to change the look of the kitchenWe do layout work glasses
💡 bar counter with his own hands: the simple steps to change the look of the kitchenJigsaw making cuts in the markup with a chisel and knock out the excess wood in the grooves. All places SPIL must always paint
💡 bar counter with his own hands: the simple steps to change the look of the kitchenFasten a "pocket" on the sidewall of the bar. You can buy the bar countertops thick toughened glass. This practical and functional

Such a bar is perfect for an ordinary apartment, and to testify.

How to make a home for the bar made of stone

This is a fairly simple version of the bar, which can handle just about any person. You will need a brick, natural stone, foamed or aerated concrete blocks, tabletop and cement-sand mixture. Also needed trowel, pickaxe and building level.

Bar counter of facing bricks
Bar counter of facing bricks

First, you need to mark a place for the future of the bar. On the floor to put a layer of cement mortar and put the first row bricks, Stone or blocks. Erect the structure to the desired height. The base stand can be a solid, in the form of columns or arrange it in a niche to the shelves. Table top may be of a monolithic concrete, lined tiles, Natural or artificial stone, wood, and plastic.

As with their hands to make the bar of plasterboard

Drywall leads to the bar almost any design. However, its creation requires a certain experience with this material.

Photos of the bar by the window in the kitchen
Photos of the bar by the window in the kitchen

For the manufacture of construction will need:

  • metallic or wooden beam profile;
  • fasteners;
  • Drywall sheets;
  • putty;
  • primer;
  • paint;
  • construction tape measure;
  • Metal scissors;
  • power tools;
  • building level;
  • Construction knife and spatula.

Step-by-step instruction

To begin, define where the design will be installed. Perform layout on the floor, and if necessary also on walls and ceilings - depending on the project. On the markup set the rack profiles and fix them with dowels. Between uprights fasten the lower and upper horizontal profiles, thereby forming the base structure. If we assume the shelves, it is possible to install additional cross at the desired height, but it should be borne in mind that the optimum distance between the profiles should be 400-500 mm.

The frame of timber for plasterboard bar
The frame of timber for plasterboard bar

After the frame structure is ready, it is sheathed with sheets of drywall, the cut and chopped by the desired dimensions. Fixing is effected by means of screws, With their cap should be flush with or recessed into the material. After plating gipsosarton puttied optionally sanded and painted. LED lighting is installed and if desired decorative lighting.

For a better understanding, we offer watch this video:

Foldable bar from transport pallets with their hands

Cool bar for parties
Cool bar for parties

We suggest to make the original bar, which can be set at any time to the party and removed after the holiday ends. To create a design need screwdriver, furniture hinges, rollers, metal water pipe, Flanges and corners, pallets, paint and brush.

Required tools and materials
Required tools and materials

At the proposed video shows how to make mobile folding counters of pallets.

How to fit the studio bar, kitchen and cafe

Modern designers use a variety of methods of introduction of the bar into the interior of the apartment. The choice of a model depends on the room size and layout. It is clear that in a small kitchen is impossible to install bulky structure, but it does not mean that in a small area to place the bar at all impossible. Compact and lightweight design - a perfect solution for small apartments, also it can help to successfully delineate space.

Barstand can be used:

  • additional working surface kitchen units;
  • worktop for a quick snack;
  • a full dining table.
A small kitchen with a breakfast bar instead of the table
A small kitchen with a breakfast bar instead of the table

Ready bars Kitchen: prices and photos of popular models

Modern manufacturers offer a variety of models of bar racks that will fit in any apartment: size, material, style and design. From these same criteria depends on the cost structure.

PictureModelThe average cost, rubles. (As of October 2018)
💡 bar counter with his own hands: the simple steps to change the look of the kitchenBar counter Dorset15 600
💡 bar counter with his own hands: the simple steps to change the look of the kitchenBar counter Gordian Barrel31 700
💡 bar counter with his own hands: the simple steps to change the look of the kitchenBar counter Glasgow28 200
💡 bar counter with his own hands: the simple steps to change the look of the kitchenRack bar TetChair Andrea32 700
💡 bar counter with his own hands: the simple steps to change the look of the kitchenBar counter Gordian Knight16 800
💡 bar counter with his own hands: the simple steps to change the look of the kitchenBar counter "Earl Gray"218 200
💡 bar counter with his own hands: the simple steps to change the look of the kitchenBar counter "Taipei» DS-6092-SN10 100

Indicated in the table prices may vary depending on the region and the implementation of the manufacturer.

A few words in conclusion

Bar table - a perfect solution to optimize space in the kitchen. In addition, it will be a good way to zone the space into a studio apartment or in the kitchen united with a living room. We hope our article will be useful to you if you decide to install such a structure at home.

About us

Serviceyards.com

Categories

Latest

Shower cabin 80 * 80 * 211 river nara light 8015 mt: prices from 69 ₽ buy inexpensively in the online store
Shower cabin 80 * 80 * 211 river nara light 8015 mt: prices from 69 ₽ buy inexpensively in the online store September 22, 2021
Monnalisa bebe cardigan: prices from $ 1,440 buy inexpensively in the online store
Monnalisa bebe cardigan: prices from $ 1,440 buy inexpensively in the online store September 21, 2021
Mystery kit: prices from 59 ₽ buy inexpensively in the online store
Mystery kit: prices from 59 ₽ buy inexpensively in the online store September 22, 2021