Washing machine does not drain: causes and repair options

Almost every house has a WasherWhich greatly facilitates the life of modern man. Manufacturers offer a variety of models with different functions and necessary, however, even the most reliable home appliances can break down. The most common failure is that the washing machine does not drain. In this review HouseChief.ru edition we will look at the reasons for this failure may occur and how to eliminate it.

Why is the washing machine does not drain

Consumer electronics is an unpleasant feature - to break down at the most inopportune moment. Is no exception washing machine. The most common failure - is no longer water drains. The reasons may be very different, but their main manifestations are:

• slow draining;
• during program execution occurs to brake;
• In some modes draining occurs, and when no other;
• Lock spin after draining.

And now list themselves causes of this failure:

• clogging of the connecting pipe between the pump and the main tank;
• foreign object directly into the pump;
• Filter clogging of a pump;
• failure of the pump;
• blockage of the siphon or drain;
• clogged drain hose;
• software fault;
• electrical problems.

Attention! Before inspecting the washing machine for the detection of faults and their elimination must always disconnect the unit for safety reasons.

Washing machine does not drain: what to do when damage occurs

Some problems arising during operation stiralki machine, can be solved without the involvement of a qualified technician. This will greatly save money, time and nerves. Consider how to eliminate breakage of the household appliance, if the water is not discharged.

electronics failure and damage to the pressure switch

Modern stiralki-machines are equipped with a sophisticated electronic control unit and sometimes the fact that the unit does not remove wastewater, due to software malfunctioning. Most often for troubleshooting reboot enough - pull the power cord from sockets for a few seconds and connect it again. If this procedure does not work, you can interrupt the process with the help of the control buttons and restart washing machine in the "Rinse and Spin" mode, which is the most short-lived.

In some cases, it may be damaged or the water pressure switch sensor. The tube, fitting the sensor, sometimes clogged with dirt that must be removed by blowing. Due to the clogging the water sensor is triggered, and then the washing machine drains the water constantly, even without filling the tank.

Comment

Victor Polyakov

retail consultant "M-Video"

Ask a Question

"If the reason why the washing machine does not drain, are in the electronics, it is best to contact the service center, especially if the unit is under warranty."

Contamination trap or filter

Sometimes washing machine It does not drain and presses the clothes due to clogging of the filter which is disposed in front of the pump and is hidden behind a small hatches on the front in the lower right corner. Next, unscrew the screw and carefully remove the filter. Thereafter, the washing machine tilt and drain the remaining water in the aggregate in a pre-prepared container. Extract from the filter any debris and rinse it with clean water. You also need to clean the inlet and outlet pipes. After all this, you need to insert the filter and gently tighten it, trying to avoid distortions. You can now include the unit and continue washing.

Clogging impeller pump

There are situations where water is not pumped out of the car, and the filter is not clogged. What to do in this case? This may be due to clogging of the pump impeller of the drain water from the machine after the washing or rinsing. To solve the problem must first be drained, as described above, to remove and disassemble the pump. A frequent cause that machine-gun does not drain, there are hairs, threads, etc., or tangled on the impeller axis, as well as small objects stuck between the pump casing and its blades. Once the pump is dismantled, it is necessary to remove from it any foreign objects that impede the normal operation. Next, assemble the pump in reverse order of analysis, set into place and connect the input and output connections.

Note! Way to get to the pump depends on the model and manufacturer of home appliances.

Faulty pump

Sometimes the reason that is not removed waste liquid in the machine, a pump electrowaste: retreated contacts interrupted wire winding burned. With the latest version all the more difficult because the pump needs to be replaced with new one. It is also the reason for the replacement of the pump impeller can serve as a great play or breakage of its blades.

Other reasons why machine-gun does not drain

What if the machine does not empty and all of the above is not the cause of the fault? There are still a few things that need to pay attention to:

• mode. You may select the program without spinning. In this case, you need to make the abolition of the regime;
• drain hose. If the washing machine does not drain and buzzing, it is likely that squashed by or kinked hose leading to the sewage system;
• blockage of the siphon;
• problem management board.

Washing machine does not drain: Repair depending on the manufacturer of household appliances

The problem that the water from washing machine It is not discharged during the spin cycle or rinse can be solved in different ways, depending on the manufacturer. It would seem that the same damage should be repaired the same way, but the fact is that stiralok design from different brands are often markedly different from each other. Basically, how to get to a particular block in the instructions for household appliances. Consider the nuances of repair washing machines, depending on the popular manufacturers.

How to drain the water from washing machines LG

Home appliances of this brand are highly reliable, but sometimes a nuisance. If LG washing machine does not drain, it is mainly due to mechanical problems: clogged filter, pump or broken impeller. The fault is eliminated by the methods described above. With electronics problems occur much less frequently.

It does not drain washing machine BOSCH

Quality household appliances BOSCH tested not one decade, but it can no longer operate normally. In washing machines of the manufacturer, if the drain is not working, first of all need to check the filter and pump. Damage to the pump - a more serious problem, which leads to the cost of buying a new unit.

Indesit washing machine does not drain

Washing machines IndesitUnfortunately, do not differ reliability electronics. The main reason why this stiralka producer ceases to work draining can be failure in the software control unit. In this case, without the help of masters service center can not do, unless you have no specific knowledge in the field of electronics. And, of course, you need to check the filter and pump of the washing machine.

Do not drain the washing machine Samsung

Consumer electronics manufacturer that is certainly good, but the desire to reduce the price of its products leads to the fact that you are using lower quality materials than in the past to manufacture the parts. What do you do if Samsung stiralka It does not drain? Upon cancellation of the drain should immediately check the filter and if it is OK, then the impeller pump, or rather the integrity of its blades. For more complex breakdowns should turn to professionals to the service center.

What if the Ariston washing machine does not drain

Ariston washing machines lost the quality that previously famous for household appliances of this manufacturer. Therefore, if the washing machine does not drain, repair should start with checking the filter, pump, pressure switch and the electronic control unit. If no help from what has been described above, it is necessary to contact the Service Center.

How to remove the water, if not working in the washing machine drain

You piled clothes into the machine, it is washed, he began to gain momentum for a spin, and the water is not drained. What to do in this case? To identify the cause and fix the damage, we must still drain the washing machine. Consider the options of forced removal of water from the unit:

1. drain hose. This is the easiest and fastest option drain the water from the machine. It is necessary to drain the hose into the sewer system or shell, Positioned below the level of the tank and a downstream end dipped in the prepared container. Thus, it is possible to pull out substantially all of the water stiralki machine.

   

2. Filter. Prepare a low capacity to discharge into the water, put it near the flap for access the filter and gradually unscrew it, until the fluid will pour (completely unscrewing not recommended). The method is not very accurate, and completely avoid getting water on the floor did not work, so prepare rag.

   

3. Emergency drain hose. In some models, washing machines There is a special outlet for emergency removal of water from the unit. The drainage pipe is located near the filter under a decorative panel on the front side stiralki. To drain the water from the machine, you need to pull the flexible tube, lower it to the end of pre-prepared container and remove the cover. Will have to wait a long time because of the small-diameter hose fluid will flow very slowly.

   

4. loading hatch. Cardinal and not very "dry" solution. If the water level is just above the bottom edge of the door, you need to stiralku leaning on the wall, and only then you can open the hatch. Removing water will by means of the bucket or jar. This is not an option if you have a model in which during a power charging port is blocked on opening.

   

5. drain connection. By this method, draining water from the machine stiralki necessary to resort, if all of the above does not work, or can not be performed. This requires to dismantle the rear panel assembly, and to find the spout, which is usually located under the drum. If possible, put the tank under it and prepare rags. Now, remove the clamp and disconnect the pipe from which water is to pour. If it does not, it means that there is a blockage, which can be cleaned with your fingers. In any case, the water is a lot.

Prevention of blockages and diagnostics washing machine

To avoid many of the problems described in this article, you need to take preventive measures and periodically inspect the individual components of the washing machine. Experts online magazine HouseChief.ru It recommends:

• inspect clothing pockets for the presence of these coins, wire, bolts, paper, etc. before load the washing machine for laundry use;
• not exceed the weight of the laundry load, specified in the instructions to the unit. This will prolong the service life of the drum;
• washing clothes, especially with metal parts, it is best done with a special bag;
• used for washing detergents only qualitative and should not exceed the required number;
• Use the tool to remove and prevent scaling on the heating elements of the washing machine;
• to avoid damage to the washing machine on the voltage drop, it is recommended to use Voltage regulator;
• periodically check the filter, pump, pipes for dirt, foreign matter and fatty raids.

A few words in conclusion

We reviewed the main reasons why the washing machine no longer drain the excess water, and how to fix it yourself. If you have questions you can contact in the comments with the experts online magazine HouseChief.ruAnd they are happy to answer them. We hope that these tips will help you, but it's better if your helper will never let you fail.