▶ ️ Venetian plaster: the choice before applying, 40+ photo

If you have not decided what type of finish for use indoors, then pay attention to the Venetian plaster. This material first appeared in the days of the Roman Empire. can be achieved by using the right technology great interior, Spectacular beauty and luxury.

So, let's see, what a Venetian plaster. Photos of different designs with unusual decoration in large quantities will be presented below. Decorative plaster should be made according to certain rules, features the work surface and even climatic conditions. Therefore, this material requires a responsible and careful approach.

What is Venetian plaster in the interior: the photo interesting interiors

For the manufacture of plaster is applied as fillers malachite, limestone, quartz, onyx, and the grant. Depending on the constituents of the mixture may be natural or synthetic.

There are some features in the use of Venetian plaster:

• stone dust material in the composition can have different freeness. Than a coarser setting, the more rough pattern will;
• Venetian plaster in the interior has a natural sheen. In this glow effect can be inside of the material with inorganic fillers;
• quality plaster may like absorb moistureAnd give it, however the material exhibits excellent durability;
• depending on the type of finish surface may be smooth, or artistic relief.

When creating a smooth plaster applied marble dust, which bind with lime. With the help of the relief material can achieve the original design. With such a structure is easier to work, as it contains large components of marble.

The composition of Venetian plaster

A similar material was used in Italy to create murals. Many masters prepared plaster on their recipes. But the basic structure was something like this:

• components used for ligament lime. It was diluted with ovalbumin or casein. The structure could add crushed pumice or milk;
• a fresco laid several layers of soil. It was added crushed brick, Straw and sand, which protects the material from cracking;
• paints frescoes are organic. They are applied with an adhesive solution.

How are the different coverage options we can look at Photo of decorative plaster. Technology does not stand still and is now part of the elite of the material added to the resin and various additives that improve the mechanical properties of the screed.

Note! The addition of different dyes allows you to create any color and pattern with a certain color saturation. Used even phosphorescent elements, which are made with the addition of a fluorescent dye.

Production of Venetian plaster: tips

Knowing the composition of the material, you can knead the Venetian plaster with your hands. Numerous videos on YouTube in detail tell how this can be done.

Here are some guidelines that will help you:

• dry mixture and water to be stirred in a ratio which is indicated on the packaging;
• composition Stir well using a drill;
• the mixture should stand, and then repeat the process again, but with the addition of dyes.

Before using the material, take care of high-quality surface preparation. Walls should be flat and smooth. base of concrete, brick or stone must be primed. Here's how:

• the surface is treated Primers, deep penetration. In this case, irregularities zashlifovyvayut. The composition must dry for days;
• then the walls are processed harboring one primer, which will improve the surface adhesive behavior. You can add a special dye primer. This will make the color layer of plaster.

Primer with dry paint will be about two hours, and then must be cleaned spatula irregularities.

The main properties and characteristics Venetian stucco

Stucco is a special compound which, after application to the surface starts unusual manner to refract the rays. In appearance it is similar to natural stone. As it looks, you can look at photos of Venetian plaster in interior of the apartment.

It is important to properly prepare the surface, or cracks and irregularities are clearly visible. The material may be applied to any surface. In this case, the color palette can be any. The most popular is a variant of the Venetian stucco. The pigment is added to a particular shade before using the composition.

After the correct trim excellent coating is obtained having properties such as water resistance, toughness, and water vapor permeability. After application of unusual composition begins to absorb carbon oxides from the air, which starts the process of carbonization. This forms a solid film with high performance.

You can pick up the textured structure of the coating to any decor and atmosphere.

Related article:

Textured plaster for the walls. Video, photos, features various mixes, how to apply with detailed instructions, review prices and manufacturers, additional tips and tricks in this article there.

Pros and cons of Venetian plaster

Unusual covering popular so far, thanks to such advantages:

There are certain disadvantages. For example, the high price of Venetian plaster and complex preparation before the application of the material, which consists of several stages.

The main types of Venetian Plaster

You can use a luxury material, not only for wall decoration. Looks good Venetian plaster on the ceiling, the more so to create a design, there is no one type of such a coating.

Consider what are the varieties:

• craquelure It is a coating "antique". Suitable for all interiors and even today. with varnish finish coating is applied to create a special effect. When the coating dries it contracts, due to what is obtained and an unusual form;

• Carrara marble can perform a true master. In fact for such a coating is not only a specialized composition, but a large number of layers 8 and 12. In this case, it turns out to achieve a beautiful iridescence and color games;

• Marseilles wax - a kind of plaster with addition of a special wax. This component improves the technical characteristics of the material and provides a surface luster. The material can be used for building with a high humidity level;

• Veneto - This technique allows you to create an imitation of polished marble. For such a material is easy to care for. It can be washed with a sponge and water;

• Marebello - Using this option, you can create a matte surface with glossy highlights.

Related article:

Decorative plaster for interior walls. The composition and coating types, manufacturers, examples of decorative mixtures as prepared independently, application instructions - in this material.

Imitation of wallpaper under the Venetian plaster

To perform the finish without the noise and dust can be purchased under the wallpaper Venetian plaster. such material simulates real Venetian, but applied in a simpler way. It should consider such materials:

• non-woven and vinyl paintings can last up to 10 years with proper care;
• fiberglass wallpaper designed to serve for 25-30 years.

Even with the bump areas, such paintings are not difficult to clean. They well tolerate wet conditions and can be used to the kitchen or in bathroom.

Venetian plaster has many advantages:

Venetian plaster: a photo in the interior

Venetian plaster allows you to make any interior unique and different from other design options. The indisputable advantage of this material is that it can be used not only in all the living rooms, but also in rooms with high humidity conditions.

Living room

For living the choice of material is not particularly limited, unless chosen design and preferences of the owners. For this room is not required to choose water-resistant material, and there are no particular restrictions on the choice of styleSuch as, for Children's or bedrooms. The interior can be relaxing or bole bright and saturated. Vivid examples of Venetian plaster will be an excellent backdrop for the spacious living room, but it requires a good room lighting.

For small rooms it is not necessary to apply the coating of saturated tones.

Price Venetian stucco material is not small, so you should keep in mind that such coverage will not change too often. The texture of Venetian stucco used to stretch ceiling.

Venetian plaster in the kitchen design photo

Decorative plaster is suitable for kitchen designAs when added to the composition of the special ingredients meets all the requirements for the premises:

• It does not absorb odors;
• wash is well tolerated and does not lose the original decorative appearance;
• It shows resistance to temperature jumps.

But even considering these factors, it is not necessary to use the material for kitchen apron. In this case, the more appropriate tile.

Note! You can combine the original plaster with wood trim or wallpaper. It should pick up and the right set of furniture.

hallway

wonderful to decorate interior hallway you can use the Venetian plaster. If the corridor is not immune partitions, The material can also be used in the coincident room.

Not necessarily all of the walls of the same draw. some parts of the image can be applied in different rooms.

Note! Rating of the coating caused by such means of expression as glare, matte strokes and modulations.

Bathroom

If the decorative plaster is applied for bathroom, The surface should be smooth flat. But even on a perfectly flat surface, apply a protective layer of enamel, lacquer or wax. For registration you should choose a simple solution that will not clutter the space. Relief cover is more appropriate for a spacious room.

Preparation and application of Venetian plaster: a video tutorial application

How to make and apply a plaster you can see in the video, which in large quantities are common on the Internet. Let us consider some of the important stages of the painting process.

Required tools

Before you start work you should thoroughly prepare. Here's what you need:

• mixture of plaster;
• wax and priming;
• suede;
• putty and a special trowel;
• spatulas of various sizes;
• electric drill with a special nozzle-mixer;
• kneading tank solution;
• rags and sponges.

Also performed such work surface preparation:

• old coating is removed and the surface is cleaned;
• dents and cracks are sealed cement-sand mortar, and small defects are straightened using fillers;
• roughness to be removed by sandpaper, and the protrusions are cleaned grinder;
• then surface processed starting puttyAnd then finish;
• then the surface must be primed to improve adhesion.

Technology application can be seen in the video:

Tinting

Before the work required choose the color of the plaster. The final composition of the white base and different dyes. This process is called - tinting. Here are some of the steps is the procedure:

• It is using the colourant fans to select the desired tint;
• tinting will need a blank sheet, a set of dyes and narrow spatula;
• Prepare little plaster and selected dyes;
• Take the container with dye, and add it to the foundation. Stir the mixture until a uniform consistency;
• via a narrow spatula to apply a sheet polosku plaster mixed with the base component. Correlate it with the desired color on the fan. Gradually adding the dye, you can get the desired hue;
• You can also add a second color.

To give a shade close to natural stone, you can drop a little black color scheme. This will allow to slow down a bit and brightness.

How does tinting can be seen in the video below:

Note! After drying, the painted surface will be brighter on two tones.

Application technique impregnation

An important step is the application of the impregnation. This can be done by spray, brush or roller. The composition should be packaged in pre-mix.

Impregnation must be applied at a temperature from +5 to +30 degrees. A dry layer after 40 minutes.

Technique primer

To use a primer, you bought the soil dissolve in water. It is better if it is drinkable. The composition should be applied by means of spray. Wall can be checked in an hour.

How to apply the wax

Is to understand, and in particular the application of wax. This composition should be distributed with the help of a Japanese or a flexible spatula. There are two ways of applying wax on plaster:

• using a flexible spatula. Wax enable smooth the surface and lightly smooth it and fill small depressions;
• with a sponge. To the surface of the walls turned invoice need to handle its foam sponge. In this case, the wax will not fill the recess.

How to apply the wax can be seen in the video below:

Note! To finish turned more luxurious, the composition of wax is recommended to stir the toner allows to get a golden or pearly effect.

Venetian plaster: price per m² job

If you do not plastering yourselfThen you need to find a specialist. Before an agreement with the master, you must know what is included in the price for the work on 1m² Venetian plaster.

One of the components of cost - the purchase of materials. You can choose the material, enamelled or wax. This will affect the value of Venetian plaster.

Option with wax more expensive, as natural.

It has the meaning and range of colors. If you have to buy an additional color scheme it will increase the cost side.

Price decorative Venetian plaster depends on the manufacturer and the specific store. Specific compounds that increase resistance of the material may also affect the price. These impurities protect against pathogenic microorganisms.

Such factors may affect the price:

• solution deposition technique. A cheaper version of a textured structure;
• reproduction of a specific color is also complicates the problem;
• the number of layers. Each cover - it's not just the additional costs, but also a waste of time and manpower.

So, consider some fees, depending on the type of work presented in the table.

Venetian plaster: price per kg

Before you buy a Venetian plaster, let's look at some of the prices on it.

Photo	Options and manufacturers	Characteristics	Price, rub
	EC bark beetle	Cement-based. 25 kg.	370
	Toiler TL, 215	The layer thickness of 2,5-3 cm.	362
	travertine	15 kg. Imitation of natural stone.	2970
	Prestige	Fraction 4 №4. Weight 14 kg.	1523
	king	Acrylic base. 30 kg.	2016
	modena	15 kg. As a filler used Turkish marble chips.	3150

Also worth exploring responses.

Reviewed by Tanya, Lipetsk: Decorative plaster UNIS bark - Durable coating can be dyed. For internal and external works

Advantages: do not scratch, it brings changes in temperature. moisture-resistant, paint can be reusable.

Minuses: no

The country house doing repairs is communicating unheated porch. Designed to undress, take off our shoes. To create an air cushion between the street and the heated room. We decided to hold the finish decorative plaster bark. It is designed for indoor and outdoor works. Before it put the wall aligned usual plaster, t. To. The bark has a fine finish

More on Otzovik: http://otzovik.com/review_3875854.html

Maliakisa, Ekaterinburg: Decorative plaster Derufa - presentable, effectively

Advantages: durable, elegant appearance, environmentally friendly, masks irregularities of the walls

Disadvantages: the price

I am a designer. All new and exciting solutions for the interior, I try to try out in your apartment, before offering the customer. Here and decorative plaster before I inflicted on the walls in my bathroom, and after already begun to incorporate into the design of projects for the client. The choice in favor of this material fell due to the fact that he is very practical.

More on Otzovik: http://otzovik.com/review_3210253.html

Related article:

The technology of plastering woodworm.In our article you will find the photos of examples, detailed step by step instructions, nuances and features that are important to learn, review of the leading manufacturers of bark and average prices.

If you want to supplement something interesting, then write in the comments. We hope that our article will help you understand the variety of options offered by the plaster on the market.

[Totalpoll id = »33345"]