💯 The seal window: select an option from the cold and sun

If, under the flap constantly blowing and the bright sun interferes with sleep, offer to find out than to seal the window to create the most comfortable conditions in your house. The technology of work performance and characteristics of the materials used is directly dependent on the desired result. So, we find out in which case it is necessary to give preference to one material and in what better pay attention to their peers.

What and how to seal the windows for the winter: the general principles and basic materials

You want your home was always warm, it is worth thinking in advance about what to glue the window for the winter. The availability of most materials offers great opportunities. We offer to meet with the general principles perform insulation work, and to learn what materials for thermal insulation should use.

General principles of warming technology

If the summer has to constantly think about what seal the windows from the heat, by the beginning of the heating season should be prepared in stages. Violation technology may cause damage to the main elements of the window unit or lack of tightness.

Thermal insulation works comprise the steps of:

• training frames and other structural elements;
• insulation and sealing gaps. Particular attention is paid to this stage with a wooden frame insulation;
• pasting pictures selected windows.

To properly select and fix the heater, you should consider the particular features of the window unit. Attention should be paid:

• material of construction of the frame;
• the possibility of exposure to ultraviolet radiation;
• age window system;
• the presence of certain types of heat insulators.

Pasting begin only after careful preparation. For this:

• carefully inspect the window opening, to identify possible damage;
• performing reconstruction works to improve the performance characteristics of the design, and also removed all the projecting members, which may prevent reliable fixing heater;
• clean the frame of existing contamination, and then completely dried. Wooden structures further stained to obtain a uniform layer;
• decide what to seal a mosquito net on the windows, if there is any damage;
• windows removed, if necessary to achieve the perfect insulation joints.

Attention! If the wooden frame for more than 10 years, it should be replaced before the insulation work and winter.

After the completion of the preparatory work can seal the window. At the same time, it is important to achieve a snug fit insulation material.

How to choose and apply the tape for windows

This is the easiest option, allowing you to quickly get rid of drafts. Scotch for windows is an affordable way, but because demand in the performance of thermal insulation work in private homes and public buildings. When you select this option, be aware that when strong gusts of wind it can partially come off. In addition, its efficiency is comparatively small.

When choosing an adhesive tape should take into account the distance between the frame and the window unit. The width of the adhesive tape should be enough to fully cover the specified distance. Pasting is carried out in the following sequence:

Illustration	Description of the action
	Starts packaging cling film suitable size and cut a slice from it is not more than 0.5 m
	Prepared segment is applied to the selected surface. It should be fixed in position on the first try, so how to fix it in the latter will be quite difficult. Then, the hand tape gently smoothes the base and is pressed thereto

Choosing foam insulation for windows: a sequence of actions

If you decide to opt for the foam insulation for windows, it should be noted that it is of two kinds:

• normal. It lay directly in the gap that is formed between an aperture and the frame and along the wings, if they do not abut the web. it can be quickly removed in the spring;
• self-adhesive. It is sometimes referred to as foam tape. Self-adhesive foam for windows mounted differently. It is best to completely remove the frame, lay the foam in the doorway, and then set the frame back.

Criteria for selecting and installing a self-adhesive tape for insulating windows

Shortly before the start of the heating season, many housewives can see the self-adhesive window insulation. It consists of an adhesive base and the insulating material directly. It may have a different width and thickness that allows you to choose the best option depending on the existing defects. Installation is performed in the following sequence:

Illustration	Description of the action
	The base of the treated alcohol-containing composition and wait it dry. Cut from a roll of self-adhesive cut to the required length windows and remove the protective film
	Laying the self-adhesive tape for insulation base slit windows and provide a snug fit

Terms selection and application of the sealant and adhesive for plastic windows

If the draft regulation loops still remained, we offer to find out what obscure the seams in the plastic boxes. The selection can be made in favor of the sealant or adhesive. As a first ordinary material suitable for sanitary purposes. The sealant is applied in the following sequence:

• via a special gun mixture was spread evenly over the formed slit;
• after complete drying of the excess cut with a knife.

Adhesive for plastic windows allows to close up the gaps and joints, acts as a sealing seam at the expense of good elasticity. For drying the composition takes a long time, and therefore need to be concerned about its protection against possible mechanical action. Construction pistol can be used for sealing large gaps. The composition is applied so that it protrudes slightly above the surface. After drying, it will take shape.

Given the chemical composition of the glue, the work should be performed only in a well-ventilated area away from open flame. composition of residues should be disposed of suitable way.

Attention! The use of PPE is mandatory.

The repaired cracks in wooden windows: the options

If the window construction is already quite a lot of years, involuntarily I have to think about what to cover a gap in the wooden windows. If desired, one can use existing materials or use other available means. The latter option will be cheaper.

If you are not yet decided, than patch up the cracks in the wooden boxes, please note the following video. Here in detail told about the possibility of using old newspapers and tissue:

What and how to seal the windows in the room and on the balcony of the sun

Living on the sunny side, each apartment owner could not help thinking of what to seal the window on the balcony of the sun. This will reduce the temperature in the living room to a comfortable level. We only need to choose the best option.

Sunscreen film for sealing up the windows with their hands

If you do not know what to close the windows from the sun, you can stick with your own hands sunscreen film. It is a budget option, suitable for all kinds of window systems.

For pasting of plastic windows can be used various types of film. The selection can be made in favor of:

• SLR. Her glue to the inside surface of the reflective side facing outward. individually selected dimming level;
• reflective and shock-proof. It is attached on the outside. It prevents spillage of debris and protects from the sun;
• dubbing spatternoy. Creating a comfortable level of lighting, protects against UV rays;
• decorative. Used to decorate glass.

Figure out what you can seal the windows from the sun, offer to get acquainted with the technological features. Works are carried out in the following sequence:

• bought a roll;
• made the necessary measurements;
• Cut a piece of foil the desired size;
• reflective material is fixed on the glass.

If such an option is not satisfied, it is worth considering what else can seal the windows from the sun with their hands.

How to select and seal the window foil from the sun: the sequence of actions

Questions as to why the windows were sealed with foil, usually does not arise. With it you can significantly reduce the amount of sunlight penetrating into the room. At the same time, you do not have to spend a lot of money.

Now, how to seal the window foil from the sun. It must be attached to carefully clean substrate.

We offer watch the following video to understand this in detail:

Selecting and applying foil blinds for windows

Dismantled than seal the windows from the sun in the summer, you should pay attention to the foil curtains. Compared with a conventional foil they have greater strength and original design.

When choosing a suitable option worth considering the stylistic design of the room. Manufacturers offer products of various colors, so choose the best option in the cellar.

What and how to seal the windows from prying eyes: the options

Living on the ground floor, it is necessary to know how to seal the window from prying eyes. This can be done in different ways. Instead of the usual curtains can use a wide variety of products. Quite popular blinds or shutters. Also, there are other options.

We offer watch a video, which shows how to seal the window tulle:

Share in the comments, how do you protect the room from drafts and the sun.