🔩 whereby you can easily screw the screw without pilot drilling

click fraud protection

Self-tapping screws are very convenient when working with wood, when it is necessary to bond items together. But screw them is not always easy. It mainly concerns long screwsEspecially if the artist works with hard rocks woodSuch as oak, beech or birch. It is often said that in order to facilitate the screwing workers use soap, which greased the cutting auger screw. That's how it is effective, and will be discussed in today's article.

Screwing long screws can be a real problem
Screwing long screws can be a real problem

Read article

  • 1 Pros of soap when screwing the screw
  • 2 Negative side promazyvaniya soap screw auger shredding
  • 3 That will easily screw screw without consequences
  • 4 The simplest device to work with paraffin candle
  • 5 THE VERDICT

Pros of soap when screwing the screw

In the production of repair, particularly when replacing plank floor or wall covering, screwing one screw deal is unlikely to cost. If we are talking about long-metiz has to master first zasverlivatsya, and after screwing screwFor example, when fixing the planking on the joists. This means that the hand should be 2 tools: screwdriver with a bat and a drill with a suitable bit. The second embodiment can be called periodic replacement of drill bits and vice versa, which is quite troublesome.

In this case, many masters are advised to lubricate the screw auger slicing ordinary soap, which allows it to screw into the wood without pilot drilling. In this case, at times reduces the risk derail the slots or does a long break with a hot screw.

The easiest way to screw the screw - to smear his soap
The easiest way to screw the screw - to smear his soap

But, as it turned out, a similar method is not going smoothly, and such a "lubricant" can go in harm.

Negative side promazyvaniya soap screw auger shredding

To understand the negative impact of soap on the screws, we should remember school chemistry. any soapEspecially economic comprises caustic which reacts with the metal. As a result of this oxidation occurs conducive to corrosion. Naturally, this process is not a single day or even a year, but if after a long time planned to trim dismantling of the structure, corrosion can deliver a lot of trouble.

Carefully remove the board after a few years will not succeed, it will have to break
Carefully remove the board after a few years will not succeed, it will have to break

But in fairness it should be noted that during installation flooring on the joists in the apartment, self-oxidation may play into the hands. It eliminates the creaking floorboards that inevitably arise after a few years. But then disassembled such coverage will only be using a crowbar. But there is another way to ease the screwing screws into the wood.

Soap protect from creaking floorboards even after many years
Soap protect from creaking floorboards even after many years

That will easily screw screw without consequences

If you plan for the future dismantling of structures made of wood, it is best to lubricate the shredding screws use an ordinary wax candle. She must be found in every home. That it is best to lubricate screw. Such a method is in many ways even more efficient use of soap. The fact that the screwing of the friction heat arises. This leads to what is printed on the screw slicing the paraffin is melted, and impregnating the wood further protecting the place of fixation. The same can be said about working with metal parts. Here wax to protect against corrosion screw himself and his seat in the metal part.

Paraffin candle - perfect assistant for screwing screws
Paraffin candle - perfect assistant for screwing screws

Still, the best option remains the pre-drilling, especially when it comes to thin boards or rails. Such material is easily cracked by screwing therein self-tapping screw. For such articles include glazing beads or battens. At high risk of fracture-dried material.

The simplest device to work with paraffin candle

To candle was more convenient to use, you can make a very simple device that does not need to purchase anything. Its basis will be used glue stick.

To operate almost any suitable adhesive stick
To operate almost any suitable adhesive stick

The first step is to remove glue residue from the plastic case and to determine the thickness of the screw, the ejecting composition. You need to work a drill or screwdriver and drill bit that is slightly smaller than the screw diameter. With the end of the candle in the center of the hole is drilled, then it remains only to screw it into the screw up to the stop and cut flush. Now, after promazyvaniya the screw can be easy rotate the pencil body to hide the candle in a tube.

Screws can be easily screwed and with a special lubricant
Screws can be easily screwed and with a special lubricant

THE VERDICT

What soap facilitates screwing a self-tapping screw even without pilot drilling, there is no doubt. However, one should think in advance "escape routes" and see if the construction deal or it will be installed for many years. Already the result is worth it to decide whether to use the wax for candle or is it better to do ordinary soap.

Yet it would be better if a pre-drilled screw
Yet it would be better if a pre-drilled screw

We hope that our today's article will be useful for novice handyman. If you have any questions, please ask in the comments below. Editorial HouseChief happy to answer them. You know another way, it is easy to screw the long screw? Please share it with other readers.

Finally, we offer you a short but very informative video on the topic.