How to make the kitchen and to save as much space? Corner sink for the kitchen makes it possible not to lose precious square footage of your home. Next, consider the variety of sinks and recommendations on the choice of design. Regardless of the number of free space (5 or 7 kV. m.), a sink in the corner of the kitchen will place next to the refrigerator, stove and other necessary cooking utensils. Such planning allows to take two main walls and leave one free to arrange dining table or the installation of refrigeration equipment.
Corner sink in the kitchen - an interesting solution with a shortage of space
Advantages and disadvantages of a corner kitchen sink
Content
- Advantages and disadvantages of a corner kitchen sink
- Varieties corner sinks. How it looks in the interior of the kitchen
- What to choose, depending on the size and interior space
- Tips for design headset corner and a corner with pedestal sink
- Video: The range of corner kitchen sinks
- Photos kitchen with corner sinks
A great way to save space is the installation of sinks in one of the corner kitchen areas. While it is fashionable to pick up enough overall countertops, the lower part is organized in the form of additional drawers or shelves for storing kitchen appliances.
L-shaped unit with a sink in the corner is quite common in the model homes
Such a design solution creates a comfortable work area and leave room for a dining table
Picking up a corner sink for the kitchen it is necessary to pay attention to the following:
- the size and availability of accommodation;
- the depth of the product;
- number of departments;
- manufacturing material;
- desired shape;
- color orientation.
In general, the main advantage of this choice is the convenience and comfort. Choose the design will not be difficult, because the market is literally overflowing.
In a small kitchen angle must be operated with maximum efficiency
Advantages corner sinks:
- practical use of the entire space;
- available placement of new elements;
- open access to any part of the kitchen (appliances, furniture, etc.).
Corner sink does not occupy as much space as is normally required to accommodate the traditional rectangular models
Disadvantages corner sink in a small kitchen with a photo:
- Complex design. It requires careful surface preparation and installation to consider.
- Angle awkward for a family member. Recommend installing a modular unit with the placement of the sink to the wall and open space for boxes, etc.
- the dead zone formation over the sink. It helps correct the situation with the purchase of the appliance pedestal and reflection external components.
A wide assortment of models allows you to choose the appropriate option corner sink
Varieties corner sinks. How it looks in the interior of the kitchen
Now cast iron products have long receded into the background and to replace them came acrylic, ceramic sinks and stainless steel and artificial stone. But before choosing a kitchen item, consider a combination of options to set.
stainless steel sink - the most affordable and popular option
Sink made of artificial stone - a stylish and durable solution
It is important to decide on its form, including the need to consider how many kitchen units and work areas you need and how they will be arranged (at an angle along the walls).
It is also required to pay attention to the number and type of household appliances that you are going to place in the room. At the time of purchase to specify the size of the budget itself and this guided by the kitchen attributes. Recommended in the regeneration of the kitchen completely fill the space of the working elements.
To accommodate the sink in the corner of the best cabinet-trapezoid
The trapezoidal cabinet will take a bit more space, but it will be more convenient for washing utensils and storage space under the sink
The most important elements that should be placed in this room:
- cleaning;
- fridge;
- place for cutting and serving;
- stove and oven for cooking;
- place for processing products (provisional).
Often placed under the sink garbage pail or other utensils. Sink in the corner of the kitchen may have a triangular, rectangular or oval shape. Also, there are other designs that require additional financial costs.
Wet use will be much more convenient if you put it, step back a little from the corner
Perfect location and classic interior should be as follows: refrigeration equipment with one of the parties, countertop, sink, another cutting plane or space for drying dishes, stove and oven plane for shaping or serving.
Equipping a small kitchen are important:
- dimensions of the elements;
- material;
- convenience and practicality;
- design and manufacturer of kitchen accessories.
Choosing a specific model, check whether you would like to get to all parts of the crane and washing
Oval sink saves a lot of space and is considered the most spacious, practical to use. Washing triangular type kitchen takes no great stretch of space. In this case, we recommend placing the dishwasher and use the area only for hand washing and just for decorative purposes. Round sink located in the corner of the kitchen, quite an interesting proposal, but often there are two irrational to look round the department. Part drying will have to do separately, may be placed in the cabinet.
To select the most suitable model, it is necessary to evaluate the diversity of forms of corner sinks
Do not forget to focus on the depth of the product. From countertops to sinks should not be less than 5-10 mm. Further, the depth to 20 mm is considered small, and the water may be sprayed. It is best to focus on the 20-25 mm.
What to choose, depending on the size and interior space
Corner sinks for the kitchen come in different sizes and can be overlaid on top of the headset or built-in. Also handy device must have a good location, that is, should consider the capacity of one or two cups.
Corner sink with two bowls made of stainless steel
Round sink small size only to owners of very small kitchens can be recommended in which on the first place saves space
The owners of large suburban homes can use interesting solutions, for example, to build the sink in the kitchen island corner
Speaking about general interior, the small kitchen is recommended to make curved facades radius-type, while the interior will look very harmonious. Internal corner better to take the form of rounding. In such cases, a round sink will look perfect. The coating of furniture with a glossy effect, and is made of enamel MDF or in combination with acrylic or plastic. In order not to overload the space visually refuse decorative panels or milling.
Sophisticated form of corner sinks allows the best use of the surrounding space
Note the placement of the types of sets with a corner sink:
- U-shaped headset gives way to a lot of kitchen design. One of these is the complete or partial absence of suspended cabinets. You can limit the decorative shelves. This will eliminate the congestion area. Several canisters or cabinets of different lengths help wondering beat in a small room old-style apartment.
U-shaped layout small kitchen involves removal of the dining area in the adjacent room
- L-shaped project involves the installation of sinks in the window opening. But if you do not want to prolong the communication, you must extend the work area using the window sill and put the sink in the corner. Form in the form of a curved letter G allows to place around the air base set (box).
Corner sink with Street View
- Direct headsets convenient in the absence of a large number of sliding elements. Suitable for decoration of the dining area, as owing expressly does not take up much space.
Direct layout is not the most convenient in terms of cooking, but it may be the best option for a tiny kitchen
It is impossible to discard bevelled model Fitting headset trapezoidal and sink at the starting point of the structure. An interesting proposal is the internal design of the headset with double angular drawers or rotating sections. You will be able to maintain the upper space and a fully zadeystvuete area under the working / cutting surface.
Tips for design headset corner and a corner with pedestal sink
Variants of registration of a headset with a corner sink:
- Painted MDF. Follow the MDF in a glossy style, paint the varnish or acrylic, and you will greatly expand the space in the room.
Set with painted facades in the Art Nouveau style
- The film on chipboard or MDF. The classic version, which is offered by many manufacturers. Available a variety of decorations and colors. This is a real long-lasting economy class for small square. m.
Facades with PVC film used in the headsets of various styles and trends
- Plastic. Save on materials and get the desired gloss can be using plastic. With the addition of metallic in the facade can solve many design issues.
Set in a modern style with acrylic fronts
- Veneer and MDF. Such a solution still requires some financial investment, but externally veneered MDF indistinguishable from solid wood.
Fashionable decision - veneered facades without handles
- Aluminum profile with glass. Aesthetically faithful and reliable way to kitchen design - is tempered or laminated glass with a solid foundation and aluminum elements.
Durability - key advantage sets with facades made of glass and aluminum
In the latter case, the available range of frosted glass facades with (or without) sandblasted pattern for giving lightness and uniqueness of your small kitchen. Pattern lends sophistication room. Variants interlace opaque and transparent patterns. Opaque glass facades can be covered with varnish or enamel. This way of processing is called Lakobel.
We suggest you explore the photo corner sink with a pedestal in such headsets. These models of kitchen design will help you quickly determine the position of the elements. And you will also be able to visually assess the benefits of these or other materials. But on the whole, an important part is played by the financial possibilities of each.
