Tulle birthplace is France. Material is named after the city where it was invented and first used. "Penetrated" in our homes, it is firmly entrenched there. At the present time it is impossible to imagine without a home decor tulle. We have enjoyed great success, nylon tulle.
Curtains or drapes of tulle, organza and other fine "capricious" materials should sew with great care.
Successfully picked tulle - one of the most important decoration of your kitchen, living room, bedroom or hallway. It is quite easy. In the first stage of the selection of tulle in the house, we pay attention to color, pattern, material quality.
It is very thin and delicate tissue that requires delicate handling.
Tulle is a lightweight, transparent material. It can be made of natural fibers, synthetic, or a mixture of different fibers. It can be cotton, linen, silk and other materials.
In the design of modern buildings can be applied tulle different colors and sizes.
You have chosen the material, now it is necessary to put in the form of the finished product.
We need to determine the length and width of the blinds.
Consider the following options tulle arrangement.
- Length of the sill.
Such a length is desired to give products in children's rooms. This is useful and solves some of the problems. For example, a very small child, crawling on the floor will not be confused in the product.
Own right hem tulle - not an easy task due to the nature of the material.
- The height of the floor tulle.
This is the classic version. Length comes to sex. Tulle completely hides the wall and does not open the plinth.
Creating comfort at home, play an important role curtains, and this is no accident. After all, no curtains make "naked" window, and in some cases even flawed.
- The standard height of tulle.
The most common type of article. Secured at the top, the lower part above the ground on two or four centimeters. Such an embodiment is very functional. When driving is possible contact with the floor. The product is less susceptible to contamination are not exposed to friction on the floor, which increases the period of its operation.
In order to best meet the needs and desires of each customer, manufacturers produce a wide web.
- Tulle with an overlap.
Very nice option. tulle waves lie on the floor, completely covering the bottom of the wall and baseboard. On the floor, the waves are placed manually. lapping length is fifteen or twenty centimeters.
When ready to purchase tulle - it must necessarily hem to give the curtain the necessary sizes.
Please note that this product will look great in large rooms with high ceilings. And absolutely not suitable for decorating small spaces with low ceiling. The product is visually reduces the size of the room.
In modeling and tailoring of products do not forget about the content standards in width. The finished product should look nice, rich.
The best content is 1: 2. The product will look good. Such an embodiment is perfect for a material with a large figure. Please note, at a lower filling your tulle will look more than modest.
The most optimal filling, it is the ratio of 1: 3. The product will look rich. In this case, the basis should be taken with a little tulle patterned bottom or not.
If the tissue is present the coupon curly beautiful part, the bottom product is left as is, go directly to the side sections.
Content
- 1 How exactly cut tulle with their hands
- 2 How to hem tulle? Description of the methods
- 3 Tulle with weighting, and processing methods hemming
- 4 Tulle-net: how to cut and hem the fabric
- 5 How to hem tulle hands, without cars? recommendations housewives
- 6 VIDEO: How long tulle hem professionally.
- 7 Tulle of different length in the interior - 50 photo:
How exactly cut tulle with their hands
Attention! Before you cut the curtains, read the instructions below.
At tailoring products tulle great complexity is precisely trimmed edge of the product. The reason is that the tulle is a thin and soft tissue. The web is constantly slips, any inaccurate movement leads to formation on the surface of puffs and small holes.
In order that the web folded in half and connect symmetrical edge is needed a firm, level surface. Our apartments are not equipped with industrial cutting table tulle and nylon fabric, so you have to use the available material. In this case, you can use the floor of the apartment. You may need the help of another person.
How to shorten the tulle? We recommend several ways to cut fabric.
- We pull out the transverse thread.
Spread the cloth on the floor. Note the desired length, placing a certain distance from each other or a pencil mark with a piece of chalk. We make a small incision in the tissue, with the edge to hook the thread and pull it along the entire length of the web. We observe the formation along the length of the fabric strip. According to the band to make the cut. You can use the writing knife or ordinary scissors, but they should be sharp enough.
Pay attention when cutting the tape cloth spread out on the floor, should not slip. To reduce slip can be put under cotton fabric base or secure it with masking tape.
For the treatment of tulle fabric used a simple trick: the right place to hook gently and pulled the thin thread of the fabric.
After this, the resulting "track" the matter carefully cut with scissors.
This method is considered the most simple hem and reliable.
- An incision is made on the material
Fold fabric in half, carefully aligning the edge. Make a small incision at the point where the edges apart. Then again, very carefully add up the material in half. The fabric must be constantly smoothing to avoid fractures and irregularities. Again, we make an incision where already traced the label. Please note, cuts must be symmetrical. Then, making sure that the fabric does not budge, we expand it back.
After all the manipulations we get the fabric folded in half. Take a ruler or similar straight line long object and connect tags to each other, spending strokes using a piece of chalk or a pencil.
Cut off the excess.
We have brought you the most simple ways to trim tissue. Try to act consistently, adhering to the instruction manual, so as not to spoil the fabric.
How to hem tulle? Description of the methods
Tulle hem is not difficult at home. We need a little patience, accuracy, and have in the house simple set of tools: thread, needles, scissors.
To hem curtains of tulle, organza and other fine fabrics take thread №40 and thinner.
Please note, for the need of tulle thin thread size number of 40 or less. The color of thread and the fabric must be discharged. Remember, you must first process the sides cloth, then proceed to the bottom edge.
If the fabric is translucent, the color of the thread can pick up a little lighter fabric, so they will be less noticeable on the lumen.
the bottom of the web processing is carried out in several ways.
The easiest way to double hem. The same method we treated side seams, but its width in this case is greater, not less than two centimeters.
Tulle hem on the sides of several ways. Most often, priority is given to traditional Muscovite type of treatment.
Bottom of fabric are often treated Moscow seam. cloth folded the edge of one centimeter, to iron. We carry a line at a distance of two or three millimeters from the edge of the hem. Excess tissue to be short. Again folded the material to iron and stitch, you should try to put a line right on the first seam.
Podvorachivaetsja 0.5 cm. Ironing. Otstrachivaetsya normal line at 0.2 cm from the edge.
The excess tissue cut by 0.2 cm from the edge stitched.
Tuck tulle once more. Again ironing. Otstrachivaetsya at a distance of about 2 mm from the first stitching.
This method makes it possible to save the amount of material in the alleys.
Often the lower section treated with bias binding - it edging lower cut strap.
Slice the curtains should be laid on the oblique Bakey, which is then creased. Untreated seam remains inside the finishing tape that have fired under the presser foot of the sewing machine. Line runs along the edges of the tape. The tape can be purchased at the store or make your own from the material at hand.
Bakey sew best with a special foot or foot-snails.
Tulle with weighting, and processing methods hemming
To make use of light materials forms weighting. They are produced in the form of cords or plates. They attach to the air product completed form, set its shape.
If the fabric has a weighting, there are difficulties with the length adjustment.
There are two ways to resolve the issue: crop material from the top or rearranged weighting. Basically, housewives choose the first option, because it is difficult to rearrange the weighting, rather difficult to produce a seam that is sewn weighting. Such a seam will not repeat every woman.
What should I do if the material is wide, and it is necessary to remove part of the width? It will be necessary to shorten the weighting. Overcasting shift, exposing part of the top weight material, cut off the excess part. After the shift manipulation overcast to its original location. If you allow the pattern on the fabric, the intervention produce from one side only, otherwise similar action should be repeated on the other side of the material.
If the tulle at the bottom has a special weighting or decorative treatment that you want to save, then stitched the curtain only on the sides.
Adjust the length of the curtains on top.
Tulle-net: how to cut and hem the fabric
The material requires a specific approach and maximum accuracy. It can be treated at home, if you follow certain guidelines. Before tulle hem, it is necessary to mark out on a flat non-slip surface. It can be a floor covered with a cotton cloth. You can additionally be used masking tape if necessary.
Tulle-mesh fine structure can be cut very simple way. Before you cut the tulle on the lateral end of the measure desired length, to make a mark. Then take a sharp pair of scissors, make a on the side of tulle on the mark applied a small incision and gently applying pressure sensitive "to slide" with scissors to the opposite edge of the fabric.
In this way perfectly smooth cut.
How to hem tulle? Start stitching the sides of the material. This should be done by a conventional closed seam. weld width should be between two and three centimeters. It depends on the material thickness, the thicker the material, the wider seam. How to handle edge of tulle? Before suturing the ends treat iron fabric. After the thermal treatment will be easier to suture.
Fabric with ironing try not to stretch, otherwise the product will lose form.
Typically, the fabric on the side seams, sew before, fixed with pins. When line suggested to put the average stitch length. Line in this case will move much faster. the thread tension is necessary to weaken a bit, this will make the product properly and to avoid contraction.
If the line winds or is skipped stitches before tulle hem at home, try to use a knitting needle or zigzag stitch seam.
After processing the side seams, proceed to the processing of the lower edge of the article. First you need to press it to the bottom seam eversion inside. Then use the same technology that was used in the processing of the side edges of the article.
Hemmed bottom edge tulle.
Tulle mesh can be processed by the Moscow seam observing the following technology. It is necessary in the store to buy non-woven tape. The width of the tape is not important, suitable tape of any width. Press out it to the wrong side of the material, and then perform normal Moscow seam. Make a line of two millimeters on the edge, prihvatyvaya tape after cut off allowance with part of the tape. The seam is about two millimeters, it is sufficient for the production of the seam.
A quick method is to shorten the curtains, is to buy a special adhesive tape.
How to hem tulle hands, without cars? recommendations housewives
All the above indicated curtains tailoring methods are suitable for manual processing without the use of a sewing machine. But this occupation costly for applied work and wasted time. For housewives who do not have on his farm special materials - yarn, needles, sewing machine - offer a way Hemming with adhesive tape.
Quite simply, the excess tissue stacked between layers of tape and iron an iron.
When using the adhesive tape for the first time, we advise you to first experiment on a small piece of cloth, and only then move on to work on the base material.
Apart from the adhesive tape, for adjusting the length of the ready-made products for special clamps are used. To give the desired length curtains with clips - not an easy task. Symmetrical result will not immediately.
When hemming tulle follow our recommendations, and the windows of your house will be decorated wonderful products, sewn with your hands.
Do not be lazy and do not be afraid to sew curtains and light curtains on their own - a simple process, though not fast.
