How to make the kitchen with his hands from the furniture panels: manufacturing

When buying their own homes each happy owner raises the question of the improvement of the apartment. Alas, but not always on the acquired square meters can accommodate all the desired furniture. Space in the room becomes much smaller, given that in most cases, the goal is to maximize the useful floor area. To date, an impressive number of factories and stores offer furniture for every taste and wealth, but it does not always meet minimum safety requirements. And there is such a pleasure rather expensive.

Of course, you can contact the shop where not only will be able to assemble furniture, but also help to make educated sketches and drawings. But then again, the cost is not cheap. Therefore, more and more people are taking up the manufacture of cabinets, shelves and other things on their own. Manufacture of furniture with his own - is impressive with adequate and reasonable approach to furnishing living rooms, and at the same time and a good way to diversify the interior of the apartment. The best option for manufacturing the enclosure walls and drawers and shelves will furniture panel. Very often this type of material is used to create a cabinet for kitchen. Kitchen - a place where the family gathers every evening at dinner, shares the events that took place during the day. It is therefore very important in the room to maximize the usable area, without overloading its furnishings, leaving more space.

REFERENCE. Furniture shield - material based on natural wood. Produced by gluing bars under pressure. On the market there are several varieties of various tree species: spruce, beech, oak, pine. Used for the manufacture of components, drawers, shelves and so on. D.

Kitchen - a place where the family gathers every evening at dinner, shares the events that took place during the day.

As you know, the production of furniture for the house with his own hands - not only interesting, but also quite simple.

Pros furniture made with their own hands

Designs made at home with his own hands from the furniture panels have several advantages over the factory samples. There is not need expensive equipment, this will be enough conventional instrument that exists in any host. We just need to show a little ingenuity, patience and creative approach to the issue - and you're lucky enough to own a modern and spacious wardrobe and a beautiful dining table for kitchen. Thus, we consider the positive aspects of the furniture made of this material.

• Aesthetically pleasing appearance. Furniture constructed from wood, benefits significantly compared to other materials and will decorate any room.
• Security. As previously mentioned, produced from various types of wood, environmentally friendly material without health hazardous impurities and harmful components.
• High maintainability. He broke down the door, glanced regiment deteriorated countertop? No problem. You do not need to go to a workshop to repair the favorite closet. This can be done with his own hands with minimal financial investment in repairs. Work with a furniture shield is much easier than with the same DSP, because the wood chips and forgive some errors.
• Low cost. Furniture panel on all the characteristics is not inferior to the furniture made of wood cut. In this case, cabinets, tables and shelves for kitchen look no worse, and are durable and easy to operate.

The choice of design and the possible nuances

First we need to determine the structure of the cabinet or desk. It is necessary to take into account the free space of the apartment, which you can use. The next step will be the creation of sketches and drawings. If you can not develop a project on its own, the Internet has a large number of drawings for a variety of design options. On the basis of the finished manufactured plan detail view, count the required amount of material. In addition, the design of a plan to help determine what size is best to buy furniture panels, as they are cut out to minimize the amount of waste produced.

Do not forget the paint, selected individually. Because wood panels - it's still a tree, and the tree needs special care. In order to prevent deformation, swelling the surface, soaking (especially important for kitchen furniture), you must purchase a nail and cover their surface at least 2 times. Furthermore, lacquer protects the surface from harmful ultraviolet rays and give a presentable appearance. Today construction market offers a variety of coatings, not only a variety of colors but also of textures. The same can be said about the stains, which are successfully used in the treatment of wood products.

For the manufacture of virtually any design in the home does not require a large amount of expensive tools. The arsenal of each host is likely to exist screwdriver, sander, a power drill and a hacksaw. With this set of tools, you can collect almost any home furniture easily.

The procedure works in the manufacture of cabinet

Assemble the cabinet with your own hands can be the example of a very simple model. This refers to the classic two-folding wardrobe furniture board kitchen with missing vertical partition. Although sometimes the small size, this furniture can be very spacious and ergonomic. After the preparatory work for the production of the future cabinet will need to cut out all the necessary details and parts. This procedure is performed using a power saw and a jigsaw. To assemble the bivalve cabinet required:

• door - 2 pcs .;
• Two side walls;
• bottom;
• 1 the rear wall;
• required number of ledges (shelves size may vary).

When all the main parts and the frame is ready, you can begin to build. The first thing you need to consider the boxes and shelves that stand in the closet. It is recommended to leave a 775 mm wide at the cut sheets. Further screws must fasten two side portions and a bottom wall. It is best to attach the structure to a distance of 50 mm from the floor. Following the manipulations necessary to start cutting out and installing shelves and drawers. The best option for this would be a narrow wood panels, the holes in which to do better in increments of 100 mm. This is to avoid material deformation during assembly. When the drawers and shelves are ready, they need to fasten the screws on the cabinet itself. Further it is necessary to install on the cover frame, to fix the rear part of the wall and secure the plinth at the corners. With regard to the door, for them it is recommended to use the surface of at least 400 mm. Holes for doing loops in the wings, the doors themselves are fixed with screws to the side walls.

Assembling the desk of the furniture board

There is nothing complicated to produce multifunctional, compact and handy desk of furniture board with his own hands. As is the case with the cabinet, before beginning manufacture design and require a sketch drawing of the desired type. Required for the manufacture of:

• square;
• plywood (thickness should not exceed 20x20 mm);
• part of the bar and plywood.

To assemble the optimal variant of the table it is necessary to take into account all the nuances and calculate the required number of niches, shelves and drawers. The size is selected according to individual preferences and the capacity of the room. Production table should start with the manufacture of tabletops. This will require using a large shield and cut out of it blank. Pay special attention to corners of countertops, which is necessary before the assembly process and reinforce bars. After processing countertop corners will not be superfluous to the most protruding parts round. This will not only give the table an aesthetically attractive appearance, but also make it less traumatic for the whole family. After countertops need to start manufacturing boxes, shelves and doors. Plywood cut out two squares measuring 70x70 and cut in such a way as to have turned 4 triangles. These elements are arranged on the rear portion of the frame wall. Based on the finished drawing to place the shelves and drawers in the designated smoking areas of the table. Boxes must tighten the screws is almost finished part design, then proceed with the installation of doors. In the structure necessary to apply lacquer, preferably in two layers. The final stage of the assembly is to install pre-purchased hardware, and a desk ready for operation.

Computer desk of the shield

In this case, the table manufacturing principle is slightly different from the previous one. It is necessary to use a sheet 3, the size of which will 2000h200h18 mm. This is the most optimum size in view of the strength and hence durability. In the manufacture of the table will need:

• Eaves (size chosen as desired);
• pieces of plywood.

As is the case with a desk job before the start of the build should start with the preparation of countertops, is cut from the board in accordance with the previously produced measurements and prepared a drawing. On the lateral surfaces it is recommended to make two small recesses to accommodate the table is strictly against the wall, avoiding unnecessary gaps at the edges of countertops. On one vertical wall of the optimum setting will transverse panel. Installation is performed with screws on the frame. Transverse panel and the presence of plywood will help to give the table of stiffness and strength. After that, the frame is made of shelves and drawers, parts of which are attached to the ready-made designs. Boxes is preferable to make as much as possible on this type of furniture for larger capacity. To build a top shelf with the required number of boxes, the shield is necessary to cut it, attach it to the table top with screws. For drawers and shelves make better use of roller mechanisms. With regard to part of the keyboard, it is made of a shield, the size of which is 40 mm. Further, it makes sense to proceed with the installation of doors. After preparing all the components should do the treatment with varnish, and then final assembly.

Finally

As you know, the production of furniture for the house with his own hands - not only interesting, but also quite simple. You only need to have patience, inspiration, the necessary number of tools needed to make the necessary calculations and drawings. Based on the desired size and design it is possible to produce almost any type of designs for the home. Wardrobe, desk or kitchen table, which can be easily done by hand, will meet all your requirements and will fit harmoniously into the overall home decor.

VIDEO: The kitchen with his hands. Solid wood. (Pine) Kitchen of the furniture board. Built-in kitchen.. Chast№1

50 photo ideas: Eat with your hands from the furniture panels