Worktop - is the main attribute of any kitchen. She takes care of most of the load in any kitchen manipulation. But if countertop surface kitchen units become uneven and covered with indelible stains, not necessarily immediately buy a new one.
Learn how to make a table top with their hands and avoid unnecessary costs.
Content
- 1 And whether you want to make a new countertop with his own hands?
- 2 concrete countertops
- 3 How to make a countertop tiles
- 4 From the filling stones (granite)
- 5 Worktop Chipboard
- 6 VIDEO: Making the kitchen countertops made of concrete with their hands.
- 7 Worktop for the kitchen - 50 photo-ideas:
And whether you want to make a new countertop with his own hands?
Inexpensive countertop kitchen table made of chipboard, which is suffering the typical disadvantages:
- Hand there are traces of grease from the cooking and scratches from knives;
- ATVibration of the washing machine standing next to the table shatters structure;
- Moyuschie funds quickly render useless laminate;
- Bastye temperature differences in the contact with hot dishes lead to deformation and cracking;
- ATlag, got through the cracks, leading to swelling, delamination and rotting particleboard;
- Pokupka new headset can lead to cleaning and cooking replacement surface.
Cost, in any case, does not mean the deterioration of the appearance or performance.
You will avoid unpleasant consequences if you take to make the countertop with his own hands. And found that the choice is always there! You can come up with a variety of beautiful and practical options. Here we describe only some of them.
If you do it right, the new kitchen countertops more than a year will delight you and your household!
IMPORTANT! Carefully measure the old countertop and make a detailed drawing.
Think about size - depends on the load on the kitchen table. There is no need to make the width countertops greater than 60 cm, and the thickness should not exceed 5 cm.
There are many ways to manufacture countertops.
Corner tabletop is best divided into three sections that are easy to make and install in parts:
- Wit for cooking and the cooking plate;
- InGlov area with a sink hole sinks;
- Wit is for utensils and accessories.
Complicated shape with protrusions and bends it is desirable to make it in-situ concrete or stone liquid at the installation site.
Do not forget to treat the outer faces countertops. Concrete and liquid can be polished granite. Chipboard and ceramics tiles more suitable for molding.
concrete countertops
It is reliable and durable. If you try, you can make it look noble marble. you will need for the manufacture of:
- DOski or blocks thickness of at least 4 cm in height desired for upstands formwork;
- WThe wide sheet of chipboard (MDF), plywood or boards;
- ABOUTbodice or the release composition;
- Melky rubble and sand;
- TOrasitel to give concrete texture of marble;
- Dwa Abrasive Discs - big and small grain;
- BUTrmiruyuschaya wire diameter of 8 mm;
- FROMilikonovy sealant;
- BUTlyuminievy profile (molding) at the outer ends;
- Montazhny glue;
- FROMamorezy.
To countertop look like marble, granite or had any other shade, the mixture is added to a special pigment that can be purchased at any hardware store.
Of the tools you need:
- Bolgarka;
- WLeaf machine capacity from 1 kW;
- Wurupovert;
- FROMtroitelny small mixer or cement mixer;
- FROMtroitelny level;
- TOHjelm (float);
- FROMtrubtsiny - a few pieces;
- WPatel - normal and gear.
Instruments.
Pick chipboard sheet for overall dimensions. Put him drawing countertops. By means of screws and screwdriver Construct ledges. Pour silicone place of their connection with EAF - concrete will not flow into the cavity, and the ends countertops will be more smooth. That he did not stuck to the mold, grease the inside surface varnish or a release composition.
Tip! When calculating immediately add about 10% obtained from above amount in reserve in case of marriage and when cutting and installation.
Manufacture of wire grate with a cell 5x5 cm. Its dimensions should have a gap of at least 1 cm from the interior wall formwork countertops.
If the frame is ready and the adhesive dried out, it is possible to start the preparation of the cement-sand mixture.
NOTE! Instead, you can use wire mesh reinforcement.
Prepare a concrete mortar with the following composition:
- Cement - Part 1;
- Melky macadam - 2 parts;
- PESOC - 2 parts;
- Plastifikator - it will increase the plasticity of the solution and the strength of the concrete after drying;
- TOrasitel (0.2 kg per 10 kg of concrete) previously diluted in water.
NOTE! Use acid dyes - they are durable and safe for humans.
Pigments may be added to the concrete during mixing solution or applied to the structure surface after the composition has hardened.
Dilute the solution with water to a consistency of thick cream. Evenly fill the formwork half the height. Place the grill. Fill the remaining space with a solution. Wide spatula, remove excess, and form flat surface the future countertops. Cover with plastic wrap and leave to dry for 7 days.
Gently tamp and smooth, so that the underside of the countertop received exactly.
After drying, grinding-machine with the coarse grinding wheel to remove the irregularities. Fine-grained disc grind surface to a smooth state. At the end of a special chamois nozzle at low speeds treat polishing paste.
Best for home use electric or pneumatic angle grinding machine and a set of diamond blades.
for the new countertops Use the kitchen table already available. After removal of the old body will strengthen the vertical supports of the bars. Glue them joiner's glue to the inner surface after drying fasten screws. Place it fit to isolate the kitchen wall skirting.
How to make a countertop tiles
The product of large size and complex shape is inconvenient to move. Perfect solution will be its structure and wall tile tiles on-site installation.
Kitchen countertop tiles with their hands become your pride.
The advantages of this approach are obvious:
- ABOUTpalubka created on the installation site countertops and after partially dismantled;
- Trudoemkuyu grinding successfully replaces sticker tile tiles.
Materials and tools:
- ABOUTblitsovochnaya tile;
- Watirka for joints;
- Montazhny glue;
- Plitochny glue.
- Plitkorez;
- uiptsy tile;
-
Bolgarka with the cutting blade.
Instruments.
Move the table away from the wall. Remove the top. According to the figure saw out the new team base countertops OSB. Prepare the wall for the installation of "apron" of the tile tiles. Mark the level via line along which will be attached by dowels trim profile (e.g., UD17). The grooves of the profile insert bases countertopsThat between them should also be connected via profile.
Set the vertical supports along the perimeter to prevent deformation during filling.
Pre-mark the space under the sink and cooking. According to their form-cut foam plugs that are glued to the CAP in the site layout. Along the outer edge of the self-tapping screw the ledges of boards or pieces of drywall. For convenience, the surface alignment countertops set majachnuju rail along its upper border, adjacent to the wall.
Fill out the form completely, remove surplus rule or spatula.
IMPORTANT! Total height with CAP should not exceed 4 cm.
Create a concrete base previously described. After drying, remove the side casing, remove the foam. Jigsaw or grinder cut holes marked on the CAP. Plan tile. It must be laid from the wall to the outer edge countertops. Protruding ends of the edge tiles Spila grinder or a manual tile.
Rounded edges to mark on the reverse side of the tile, make a cut disc grinders, using tile nippers gently break off the unnecessary pieces and align the edges with a file.
TIP! To accurately cut using pesko- or water jet cutting.
Apply tile adhesive on concrete evenly to 3 mm. Install tile, lining the joints with the flashing crosses. After drying, the adhesive do grouting. Reinsert the housing of the kitchen table. The ends countertops treat the sealant and close the molding, gluing it with the clamps and mounting adhesive.
Benefits countertops, tiled, are undeniable!
From the filling stones (granite)
According to the method of manufacturing is very similar to the creation of countertops of concrete. The main advantage of the method - you can make a countertop with a form of any complexity, which will have an appearance that is indistinguishable from the mountain stone.
The disadvantage is sensitivity to mechanical and thermal stresses.
Liquid stone is a composite material and consists of:
- ANDzmelchennogo filler (marble or granite chippings, sand) - up to 80%;
- FROMmoles polyester - 20%;
- HSmall quantities of hardener and colorants.
If done correctly, such a countertop can last for years.
ATTENTION! Some manufacturers of liquid stone is added to the composition of styrene - a substance hazardous to health. Take the time to study the chemical composition or contact your dealer for advice.
To increase resistance to mechanical and thermal damage can be strengthened countertop surface gelcoat. It is uniformly applied to the inside surface Formwork and only then filled with liquid stone, and set a reinforcing mesh.
After drying, the workpiece must be sanded and polished to make the finish.
IMPORTANT! Front side countertops using gel coat formed interior of the casing, so carefully select a material for its assembly.
Worktop Chipboard
The main advantages - easy and quick manufacturing. On it you can set a coating of plastic or liquid applied by spraying granite.
Countertops made of chipboard - the most affordable cost and popular solution for your kitchen.
You will need to purchase:
- Chipboard 20 mm thick;
- Peraser sheet;
- TOLei epoxy.
Saw components countertops jigsaw of chipboard. Treat end faces sealant. Cut the workpiece from a sheet of plastic material in the form countertops with an allowance on the perimeter to 3 mm.
If the worktop is made up of several parts (which is probably a lot), it is necessary to seal the parts to each other staples.
After drying, remove the excess construction cutter. Butt close molding.
Close end edge can metallicheskkoy plate or plastic sheets for lining.
You are free to make a lot of options for countertops kitchen table - from liquid stone, with tiled, concrete with simulated granite.
It will look better purchase, and will last longer!
VIDEO: Making the kitchen countertops made of concrete with their hands.
Worktop for the kitchen - 50 photo-ideas:
