Metal bed with his own hands: turn-based technology for creating

Iron bed - a subject that can give the interior a special luxury and chic. Smooth metal bends add aesthetics to the bedroom.

A third of your life man holds in his sleep. A full night's sleep - the key activity during the day, the quality of which is able to provide only a comfortable bed.

Furniture stores represent a wide range of choice of the necessary pieces of furniture. But not always and not in all respects possible to choose exactly what you need. In this case, there is a question of self-production of such an important interior.

Difficulties in

Production of iron bed charge, time-consuming and complicated process. Is it easy to do it yourself? Each defines itself in the best of their ability and skills. Requires certain knowledge. Replenishment of this knowledge. Creative spirit. Start with the small - get lessons experienced farrier, or ask for help from a knowledgeable, in the case of man. Because it is likely to do something wrong. Try to create their own - a simpler version. In addition, it is necessary to have at least the simplest necessary equipment. But the main difficulty lies in the preparation of component parts and their processing. All necessary circuitry can be taken from the Internet. The main thing a little patience and self-confidence.

Sizing

Before you begin, you must decide on the future dimensions. This requires a clear understanding of which will be posted bed and who would sleep on it. In the case of upgrading an apartment or room, we can move away from the usual stereotypes and to choose a new place for him.

There are standard types of beds: single, double, and a half. Keep in mind that a place to sleep should be 30 cm longer human growth about to sleep on it. Typically, a length of 2 m, but may vary within the range of from 191 cm to 213 cm.

With a width also should decide. Thus, depending on the type, the width will have the following value:

• Single - 91 cm;
• double - 137 cm;
• queen-size - 99 cm.

Large options are designed for two people. However, in a room occupied by a lot of space. Therefore, before starting work, you must measure the space in the room allotted to it under a bed. Also take into account parameters such as space for bedside tables and a space for free movement.

Another important factor is - the choice of mattress. When performing work, consider moving away from established standards, that it will have to make to order.

types of structures

Home to the appearance of metal beds Egypt can be considered by right. Afford, they were only wealthy people. Is a sign of wealth and luxury. In the Soviet Union iron beds were made and the pattern did not differ elegance. The situation has now changed dramatically. In the market of furniture emerged from metal objects, different way of performing. These include the following.

1. Wrought iron designs - are the foundation of the whole metal pipes. Pipes with a cross section of different diameter, which allows to reconstruct variety of subjects in the design. The weight is not more than 50 kg. Forging is of two types: cold and hot. In the first case, all manipulations with the metal carries a special apparatus. The process is more like punching. In the second case, the master of her hands. Metal is heated to 600 C. With the forging is possible to recreate the object in any interior style: classic, modern, rococo, baroque, ethnic, high-tech.
2. Weldments - differ from forged, method of joining together the finished parts of the future product, by welding. Products made in this way less original: classical or modern.

Any bed consists of a frame, the frame, back, legs and fasteners. The main elements that are the basis of any bed is the frame and the frame. The frame serves as a support. It comprising backrest and side panels. Frame - the part on which the mattress is located. Particular attention in the manufacture, should be paid to the headboard. It carries a decorative role and totally sets the tone for the entire article. The forged components are used as decoration. They can be purchased ready-made.

Preparation Process

Before the start of production of iron bed with his hands, should be thoroughly familiar with the available models and designs. Rate the complexity of production and their capabilities. Most of the options are fairly simple in its execution, and can be implemented even for beginners.

Further, it is recommended to make a plan. Describe all the steps, materials and tools. So it will be saved time and money.

Determine the size and the model on the basis of their wishes.

To make your bed of metal arms, you must perform a number of preparatory activities aimed directly at the production.

1. Draw a diagram of the product.
2. Purchase materials.
3. Measure the dimensions of the mattress, which is advisable to purchase before production beds. So it will be able to compare it with the product during the manufacturing process.

Tools for work

For the manufacture of welded iron bed with his hands need, of course, the welding machine. And also other tools:

1. LBM (Bulgarian);
2. drill with a set of drill bits for metal;
3. roulette;
4. square;
5. square file;
6. metal brush;
7. sandpaper;
8. brush for painting;
9. primer for metal surfaces;
10. paintwork.

For wrought products, in addition to the main list, you will need to add more stock of forging equipment. Depending on the type of forging, different and will set. Thus, the kit for cold forging type includes:

• snail - allows you to create spiraling patterns;
• gnutik - it used to bend metal rods at different angles;
• Flashlight - to create parts of the same name "flashlight";
• Twister - spins the rods along the longitudinal axis;
• volume - gives the ability to make three-dimensional pattern;
• Wave - parts and accessories to create a wave-like patterns.

Hot forging type need a forge, anvil, shperaki, hammer, sledge hammer, pliers, hammers.

Perhaps not all the required equipment. The choice will depend on the ultimate goal.

Turn-based technology for creating metal bed

Creating an iron bed includes preparatory works, installation and handling of the finished product.

The process begins with a backrest. For this profile pipes prepared from the blank according to the drawing. Laid out on a flat surface, fastened and fixed by welding. It is necessary to monitor the degree of angles for smooth design.

In the next step you will need the use of grinders and channels. Made for frame mounting brackets - 2 and 4, the central side, a slope is 5 degrees. Fasteners connect the backrest frame with a continuous welding seam. The optimum distance from the floor - 0.35 m.

1. Preparation of material for frames.

Steel channels are cut into blanks. Size is determined by the following calculation: frame length plus 5-6 cm. Channels are connected to the corners. For better connections in the horizontal shelf corner cut off the protruding portions. The joints, as in the previous version, boil a continuous weld.

1. Installation of the frame.

The backs are put in upright position, to adjust the frame and made the slots layout on the lower sill. Drill bore holes not exceeding 9 mm in diameter. Drilled holes are adapted to the shape of the spike with a file.

Assembling the main body is completed. The next step - welding lattice under the mattress. It is welded to the finished frame.

Next on the back steps and set caps on the exposed parts of the pipes. They are usually sealed steel circles.

For imparting sophistication beds, all seams and protruding elements, are cut off grinder, a brush and processed by a special grinder to the metal base.

Finishing is done by a well-prepared surfaces: primed, then varnish and paint.

Advantages beds made of metal

Despite the complicated process, metal beds, have a number of advantages. Here is a list of some of them:

• environmental friendliness;
• resistance to abrasion;
• hygiene;
• Reliability: resistance to mechanical damage and weight loads;
• a variety of design and style;
• light weight, which is convenient for moving furniture;
• It is not exposed to fire.

Metal bed is attractive in appearance and perfect "fit" into any decor. And if you have certain skills and tools the process will not be difficult. In addition, this type of activity - a great option for the development of creative abilities and, as a result, obtain an individual interior. Made iron bed with their hands will be long and reliably.

VIDEO: Metal bed with his hands

50 photo ideas: how to make a metal bed with his hands