The soft head of the bed with his hands: Ideas, spectacular options

The bed in the bedroom occupies a central place. It is possible to sleep, relax, read, watch TV.

Let's talk about what happens headboard, and how it can be done by hand at home.

Forms backs

The first option - a classic, made of wood. The method of processing of wood depends on how the bed will fit into the style of the bedroom. Strict implementation of the headboard is not decorate, they make square or slightly rounded. Such furniture items are lacquered or painted.

Option of metal - an ancient form of the headboard. This variant is used in many styles of interior bedroom.

Option, which uses a mosaic or natural stone, another one of the popular types of backs.

Design, which used textiles - a fairly common phenomenon.

By the different styles of design bedroom suitable for certain types of textiles.

It looks stylish bedroom furniture and decoration which is made partly from leather.

in the form of shelves design allows appropriate to use the bedroom space to free up space in it.

Mirror headboard for those who are not committed to the Feng Shui.

Materials and tools

Sheathing material for bedroom furniture itself is quite difficult. But if it is good to try, do not hurry, you can get a good result. Better when the design makes the master. But also to learn something new is never too late.

You will need:

1. Veneer thickness from 8 to 12 millimeters.
2. foam sheet of 50 mm and above.
3. A piece of material of the decorative or technical form. It should cover the area of ​​the head of the bed.
4. Decor items for decoration.

Conceived not do without the following tools and materials:

• Electric;
• jigsaw;
• Set of drills;
• Furniture stapler;
• Set of brackets for furniture stapler;
• Construction of the knife and scissors;
• twine;
• A screwdriver and a hammer;
• glue;
• Two sets of buttons;
• Sewing kit.
  

Cooking backrest frame

First of all, we release the frame from an old skin. From the rear nailed or fasten screws along the length of a pair of boards or plywood. If you wish, extend the base bars of 5x5 cm. They can not attach to the frame. They will keep the brackets that hold the soft lining.

Hole marking

We mark up the holes that will be drilled for the mounting material. Template for it will serve as a perforated plate Pegboard, which store tools and other attributes.

The whole work consists of the following steps.

• We measure frame and mark its center.
• "Tsentruem" plate relative to the center.
• Begin 3 holes below the center of which is indicated.
• Using marker hyphenation points for future slots skeleton.
• Note on the tile has made the hole so as not to get confused. We note the point, and after 7 holes put a new one.
• We continue to move in the same direction. The first point of the second row will be against the 4 holes. That will have a diamond shape.
  
  

  It is not necessary to put the point to the very edges of the headboard, leave a few centimeters intact.

• Reaching the edge of the panel, move it, combining the plotted points with the necessary holes. This continues until the construction is not at the top half is marked. Drill holes at the marked points for free entrance to their needles. Shakes off the dust.

Fasten the foam and fabric

Take foam, dividing it into two pieces by size, and place it on the front of the backrest to the bottom of the recesses. Align the sides and top of the foam. Too much cut off.

Draping textiles. Reserve margin along the edge of from 25 to 30 cm. Put vertically draped matter via its design and abut the wall. It should be noted that when she will sheathe, we need access to it.

Cushioning buttons

Now we are waiting for the most time-consuming work - close-fitting cloth buttons. At the set of buttons there is an instruction on the application, carefully read it and start to work. But first a few tips for working.

• Fabric cut with a margin of a little more than a template that is in the kit. Too much can be cut off after we'll drive cover in the form of buttons.
• Cloth and cover plant in the shape of the side, then gently insert.
• Before inserting the buttons of the legs, it lubricates the edge of a drop of glue. Excess solution is removed with a cloth. He must dry at least overnight, to trained buttons can be used.

sheathe design

To carry out this procedure, you must be reserved by a long needle with a large eye, simple buttons and twine. It is necessary to firmly tie the knots on the rope. They should do more.

We put a long piece of rope, and put on a needle through the buttons of all the holes, as if it was sewn. To tie it at multiple sites.

Skipping needle through the upper central hole which we drilled and move the head from the rear side toward the front. Needle and keep strictly right. Needle pierces the foam, gently pushing on it from outside. We take out the needle will appear.

Dried fasten a button from the front of headboard. For this:

• Skipping needle through the eyelet covered with buttons;
• Making the turn thread around buttons and then it is passed through the eye;
• Drown button of a foam rubber, while at the same time pulling thread (loop buttons of holding in this position);
• Cut the cords, leaving little tails;
• Tying the ends of the twine at the bottom of buttons by analogy with laces;
• Tie a knot in the rear side, do it repeatedly.
• Excessive rope cut off the tips of the hide;
• "Zaschiplyaem" matter, forming its folds.

After fastening the buttons, form a crease that goes up. Then fasten the next and again form a crease. Sew four buttons, fabric taut and fix brackets folds.

In a similar way to fasten the buttons of the next and form a new series of folds 1. By its end we continue to flash the remaining surface.

Now the little folds are formed and mounted after each buttons for beautiful diamond shapes.

fasten tissue

1. After a complete firmware base, it is necessary to fix the fabric around the perimeter.
2. We place the floor structure facing downward. The fixed at the top of the fabric can still drive a pair of brackets.
3. For accurate registration of the corners, doing bends, pulling on the upper side to the bottom. Closing her taut sidewalls and fasten the crease with clips.
   
   

   Ideally should look like the front side and rear view is not so important.

4. Continue in same way further work. We try to achieve perfect framing the outer side of the structure.
5. Before fixing the bottom edge of the fabric again put back to the vertical position and cut off the extra pieces of cloth around the legs.
   
   

   The attachment on the front legs of the fabric does not make sense, because it is so taut rear.

Interior bed and back decor

The interior of the bed depends on the preferences of the owner. Typically, the bed is purchased or ordered finished masters. But now it became popular to decorate the soft headboard itself.

Decor padded headboard can be very different. It all depends on your imagination and budget.

VIDEO: Soft headboard with his hands.

Head of the bed with his hands - 50 photo-ideas: