Choosing furniture Stapler: types of staplers, the device tips

There are a variety of different models tools necessary to simplify life. stapler one of them. It is popular for many years.

There are many modern types. Each of them is designed for a specific type of work, ranging from simple and ending the use of them for industrial purposes. In everyday life, often used furniture Stapler.

The mechanism unit composed of several important parts. Electric models are most popular. It is connected to the mains and can be run.

When a shot, bracketsand takes off and comes in a wooden plane. Passing through the material, it is fixed in the furniture parts.

bracketss practically invisible. We see only their backs that look like thin strips of metal. The fabric is not torn, it is firmly assigned to the right place.

stapler It is convenient toolom, it is necessary not only to builders. It is well suited for use in everyday life. Can not only be used bracketss, but also nails.

types staplers

There are several different types of Staplers. Before you buy this product you must carefully deal with all varieties.

Among the types available in the market are the following.

1. Manual. Is a mechanical tool, Work on which is accomplished with the application of physical force. A key advantage is mobility. It need not be connected to the mains. You can work without worrying whether there is a nearby outlet. But it is necessary to use physical force to make toolom any action. If you plan to work on a large scale, you get tired quickly. This will affect the execution time of all the action. The planned work will take several times longer than planned. Manual is perfect for hauling furniture in the home when a small volume of cases scheduled.
   
   

   In industrial applications this kind is not in use.

2. Electric. To make them any action will need to have a number of electricity. It can also operate on battery power. Among the main disadvantages are that its mechanism wears out quickly. Besides design has poor impact strength and low rate of fire.
   
   

   It is used not only at home but also in a more professional environment.

3. Pneumatic. He is considered the most powerful. It is often used at major construction work. The principle of the pneumatic unit is pressure compressed air. His power does not affect the rate at which it scores bracketss. This option can not be considered the best among all types. For this Staplerand it requires not only the compressor, but also electricity. Excellent it is suitable to perform restoration activities at home. Use the following standard bracketsy, in which no rounding. It should start with simpler models. Characterized pneumatic assembly and high cost, particularly if more complete fly compressor.
   
   

   For a beginner this tool are advised not to use it.

Before starting work, it is recommended to thoroughly investigate the operation. Mechanics need to be adjusted before use. It would be the best fabric-draft, in which you can test shots to set up the equipment.

Pre-layout placement needs to be done brackets. This will help to get the same distance between them. When done shot, be sure to hold the material. Regularly check how much is left in Staplere charge.

Advantages and disadvantages

Any equipment has its own advantages and disadvantages.

The advantages of mechanical Staplerand includes:

• cost;
• He has a simple structure (this option is important because the simpler arranged tool, The less likely it will break);
• Mobility;
• You can safely use.

The disadvantages of this type of equipment should include the following factors.

• To work with it you need to use a lot of physical effort.
• Characterized by a low rate.

The advantages include the following electrical pluses.

• Working with him, you do not need to exert physical force;
• It has a high speed;
• Tool It has a high capacity.

Among the disadvantages of this type of equipment include:

• Value is higher than the mechanical;
• Requires connection to electricity (because of this they can work on a limited radius, everything depends on the length of the wire);
• Heavier than the previous species.

The positive characteristics of a pneumatic Staplerand should include:

• The speed of the high-level;
• It has great power.

Among the disadvantages of this type of equipment the following note.

• Requires compressor. This affects the cost, weight and size.
• In most cases, used as a permanent installation.

How to choose a quality mechanical stapler?

Mechanical unit differs not too complicated structure. But it has certain peculiarities, on which depends the convenience of work.

1. Transparent magazine. This is a convenient option that allows you to control how much is left in the device brackets.
2. Regulator impact force. This allows you to set up the equipment, depending on how dense material. Greatly facilitates the work.
3. Ensure accuracy of the shot helps narrow operating device tip.
4. For safety there is a stop on the handle. This will help prevent accidental discharge.
5. Handle with rubber base. This will help toolhave not slip in your hands. Whereby the work equipment will be more convenient.

How to choose a quality pneumatic stapler?

First, you need to set a range of planned activities. The conditions in which it will be used tool, Amount of consumable material and the working surface state dependent parameters that need to rely for selection. For the production of furniture fit universal model, where to balance the effectiveness of the performance of work and ergonomic qualities.

If you plan to use the unit in the home, it is best to choose an air entry-level model. This equipment allows for purposeful activity with small hardware. If you plan to work with textiles, such tooland it will be quite enough.

How to choose a bracket for furniture stapler

For a correct choice should refer to the instructions supplied with the tooly. It should take into account certain parameters to select the appropriate option. The following parameters are important.

1. Depth. More common value of from 4 to 14 mm. Specific depth depends on the nature of the work, which is scheduled to perform. Stitched gobellenom chair fit with a value of 8 mm.
   
   

   If you plan to work with felt, it is recommended to buy with a depth of 10-12 mm.

2. Type of bracketss. It must fit the model of the unit. To do this, compare the markings on the packages. They should match. If bracketss will be too small for Staplerand then performing a single shot, they will fly to each other in turn. Because of the size is not right inside tooland may appear skewed. It will provoke poor-quality work of the unit.

Charging mechanical stapler

mechanically Staplerth work is quite simple. You need to know how the charging process. It involves several steps.

• The unit must be put on guard.
• On the back of the equipment is lifted the flap. Behind it is a groove for brackets.
• From this area you need to pull the pin and spring.
• Block brackets turn the backs of the handle and insert into the slot.
• Return the rod to its original position. It is necessary to carry out clamp brackets within toolbut.
• Fold need to shut until you hear a click.

Charging furniture pneumatic stapler

Other models pneumatic instrument has good impact strength, high reliability and speed of operation. To use it you need to take additional compressor.

For standard household chores this kind is not suitable. It is better to use simpler model.

To charge the air, do the following.

• The unit is blocked. This will help prevent accidental turn it on, so click on the button to open the tray, where the bracketss. Depending on the model tray cover can open or he comes out of the handle.
• Re sure that Stapler continues to stand on guard.
• bracketss should be put in the paper tray, their feet need to win. After their installation, verify that they were in a level position.
• Close the tray.

Working party tool should be turned to the material.

To carry out home renovations furniture better suited mechanical Stapler. For larger projects you should choose an electric model. When starting your own production is recommended to get air. Select the type should be based on the type of activity planned. It is the primary setting.

It is only important to observe safety precautions. Pre-set the unit to the fuse.

VIDEO: The types and use of staple gun.

VIDEO: How to charge the furniture (building) stapler.